Last Updated： Aggregation Period:Mar 18, 2026～Apr 14, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Mar 18, 2026～Apr 14, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Mar 18, 2026～Apr 14, 2026
This ranking is based on the number of page views on our site.
721～750 item / All 1256 items
Tennis clay court exclusive stainless steel center fitting AT-2102 U-shaped center fitting
Stainless steel center fixture for tennis clay courts AT-2102 (individual) U-shaped center fixture - Made of stainless steel - Weight: 0.5kg - For clay courts
VT-7560 Badminton Post Floor Fitting <For Flooring Installation, Locking Type>
Floor fittings for badminton posts <for flooring, lock type> VT-7560 (set) - For board flooring - Detachable - Socket made of special steel pipe - The removal of the cap is done with a dedicated tool.
GF-1009 Low Iron Bar Floor Fitting
GF-1009 (set) floor fittings for low iron bars - For board covering - Upturn type - Made of zinc alloy - Socket made of special steel pipe
GF-2098 Jump Box Anti-Slip Fitting
GF-2098 (set) Jump Box Anti-Slip Fittings - 2 pieces per set - The anti-slip fittings are screwed into the floor for use.
Floor hardware for fixing the judo mat frame JD-9020 floor hardware.
Floor hardware for fixing judo mat frames JD-9020 (each) floor hardware - When removing the judo mat frame, cover it with the included flat screws.
Swing seat hardware
SW-110 Swing Seat Metal Fitting - 2 sets per set - Includes mounting bolts - Includes shackle for chain connection SW-111 Swing Seat Metal Fitting - 2 sets per set <Stainless Steel> - Includes mounting bolts - Includes shackle for chain connection
VT-6658 Volleyball post and indoor tennis post floor fittings <with elastic sheet>
Floor fittings for volleyball posts and indoor tennis posts VT-6658 (set) floor fittings for volleyball and tennis posts <with elastic sheet> - Upturn type - Socket made of special steel pipe - The lid opens and closes with a ball lock pin.
AH-4534 Floor Mounting Bracket for Handball Goal
AH-4534 (set) Floor fixing hardware for handball goals - 8 pieces per set
Can be installed even in narrow areas like densely populated urban residential areas! Seismic reinforcement brackets that can achieve seismic retrofitting in a short period with minimal construction.
"FIT Power" is a seismic reinforcement fixture such as a concrete block wall that serves as a substitute for retaining walls. The maximum protrusion of the angle support on the site side is kept to about 65mm, allowing for passage even after installation, making it a convenient design for narrow lots and densely populated residential areas. Additionally, tightening work can be performed by one worker from the site side, enabling a reduction in construction time. Compatible with perennial walls. *Please inquire about delivery times as this is a made-to-order product. 【Features of FIT Power】 ■ Lock bolt pile foundation method - Ground friction force is seven times the weight - Shortened construction time and cost reduction ■ Round head bolts prevent free rotation ■ Design that maintains convenience even in narrow spaces - Residents can pass through even after installation - Component weight manageable by one person ■ Demonstration experiments conducted under the guidance of the Faculty of Engineering, Gifu University ■ Patent obtained as a "reinforcement structure and reinforcement member for walls" ■ Certified as a recommended disaster prevention product by the Japan Disaster Prevention Safety Association *For more details, please refer to the PDF materials or feel free to contact us.
Can be installed even in narrow areas like densely populated urban residential areas! Seismic reinforcement brackets that can achieve seismic retrofitting in a short period with minimal construction.
"FIT Power" is a seismic reinforcement fixture such as a concrete block wall that serves as a substitute for retaining walls. It keeps the maximum protrusion of the site-side angle post to about 65mm, allowing for passage even after installation, making it a convenient design for narrow lots and densely populated residential areas. Additionally, it can be tightened by a single worker from the site side, enabling a reduction in construction time. The FIT Power Type 14 is compatible with block walls of H1, 400mm from the road surface. *We also have models available for block walls ranging from H1,200 to 1,800mm. 【Features of FIT Power】 ■ Lock bolt pile foundation method - Ground friction force is seven times the weight - Shortened construction period and cost reduction ■ Round head bolts prevent free spinning ■ Design that maintains convenience even in narrow spaces - Residents can pass through even after installation - Component weight manageable by one person ■ Demonstration experiments conducted under the guidance of the Faculty of Engineering, Gifu University ■ Patent obtained as a "reinforcement structure and reinforcement member for walls" ■ Certified as a recommended disaster prevention product by the Japan Disaster Prevention Safety Association *For more details, please refer to the PDF materials or feel free to contact us.
Can be installed even in narrow areas like densely populated urban residential areas! Earthquake-resistant reinforcement brackets that can be installed in a short period with minimal construction.
"FIT Power" is a seismic reinforcement fixture such as a concrete block wall that serves as an alternative to retaining walls. It keeps the maximum protrusion of the site-side angle post to about 65mm, allowing for passage even after installation, making it a convenient design for narrow lots and densely populated residential areas. Additionally, it can be tightened by a single worker from the site side, enabling a reduction in construction time. *The model compatible with the perennial wall is made to order. We require about one month for manufacturing and delivery. 【Features of FIT Power】 ■ Lock bolt pile foundation method - Ground friction force is seven times the weight - Shortened construction time and cost reduction ■ Prevents free rotation with rounded head bolts ■ Design that maintains convenience even in narrow lots - Residents can pass through even after installation - Component weight manageable by one person ■ Demonstration experiments conducted under the guidance of the Faculty of Engineering, Gifu University ■ Patent obtained as "Reinforcement structure and reinforcement member for walls" ■ Certified as a recommended disaster prevention product by the Japan Disaster Prevention Safety Association *For more details, please refer to the PDF materials or feel free to contact us.
An example of construction of an original gate combining "FIT GATE" and "FIT HIGH-WALL"!
We would like to introduce a case where we delivered "FIT GATE + HIGHWALL." The "FIT HIGH-WALL," which is the same height as the "FIT GATE," does not require a retaining wall due to its seismic design, allowing for secure pathways even in areas adjacent to roads, while also serving as a privacy screen. Since the embedded post and intercom piping are installed and shipped from the factory, there is no need for detailed work on-site, reducing the burden of on-site labor. 【Case Overview】 ■ Product: FIT GATE, FIT HIGH-WALL ■ Size: Approximately W10,550 × H2,925 mm ■ Installation Time: Approximately 5 hours *For more details, please refer to the related links or feel free to contact us.
The impact on neighboring residents is minimal, and the seismic reinforcement work can be completed in a short period!
We would like to introduce a case where FIT Power was adopted for the seismic reinforcement of a concrete block wall for a certain company. Due to the adjacent apartment building, it was difficult to carry out extensive construction work. FIT Power can reinforce the existing block wall as it is, so although excavation work is necessary, it has less impact on neighboring residents compared to demolition and replacement work, allowing for the seismic reinforcement to be completed in a short period of time. 【Case Overview】 ■ Challenges - It was difficult to carry out extensive construction work due to the adjacent apartment building. ■ Results - Although excavation work was necessary, it had less impact on neighboring residents compared to demolition and replacement work, and the seismic reinforcement was completed in a short period of time. *For more details, please refer to the related links or feel free to contact us.
The installation period is shorter compared to demolition work, allowing for consideration of the users as well.
Here is a case study where FIT Power was installed on the boundary wall of a coin parking lot. Due to the difficulty of dismantling and removing structures for exhaust gas measures, and the desire to maintain as much parking space as possible, it was decided to use FIT Power for seismic reinforcement instead of a retaining wall that would protrude significantly and reduce space. The protrusion of the angle on the property side is approximately 65mm, allowing for seismic reinforcement while maintaining the parking space. [Case Overview] ■ Issues - Dismantling and removal are difficult due to exhaust gas measures, and there is a desire to maintain as much parking space as possible. ■ Results - The protrusion of the angle on the property side is approximately 65mm, allowing for seismic reinforcement while maintaining the parking space. *For more details, please refer to the related links or feel free to contact us.
Introducing examples that achieve both securing traffic flow and preventing disasters caused by earthquakes and other events!
We would like to introduce a case study of FIT Power installation in a newly built private residence. In this instance, at the request of the homeowner, the flow from the service entrance to the single door next to the parking lot was poor. To resolve this issue, they chose FIT Power. Instead of removing all the support walls, we replaced two support walls from the single door to the service entrance with FIT Power, achieving both a secure flow and disaster prevention from earthquakes and other hazards. [Case Overview] ■ Replaced two support walls from the single door to the service entrance with FIT Power ■ Achieved both a secure flow and disaster prevention from earthquakes and other hazards *For more details, please refer to the related links or feel free to contact us.
Introducing examples of how we were able to ensure the safety of environments where small children live in a relatively short period of time!
Here is an introduction to a case study of FIT Power installation at a nursery school. FIT Power was installed for seismic reinforcement. It was possible to achieve seismic retrofitting without narrowing the parking spaces or pathways. From the parking area, only the angle columns are visible, and they do not stand out much, thus not harming the landscape. 【Effects】 ■ Achieved seismic retrofitting without narrowing parking spaces or pathways ■ Does not stand out much and does not harm the landscape ■ Ensured the safety of the environment where small children live *For more details, please refer to the related links or feel free to contact us.
Since large-scale construction such as demolition and removal is not required, it is possible to complete the work in a short period!
Here is an introduction to a case study of FIT power installation at a kindergarten. Although there was a retaining wall separating the kindergarten from the neighboring property, it was not installed at the appropriate pitch, so additional reinforcement was carried out using FIT power. Since the protrusion is smaller than the retaining wall, the children can play as they always have without feeling any discomfort. 【Case Overview】 ■ Additional reinforcement of the retaining wall separating the kindergarten from the neighboring property ■ Additional reinforcement of the wall near the playground equipment ■ Children can play as they always have without feeling any discomfort *For more details, please refer to the related links or feel free to contact us.
Introducing a case where a block wall built in an alternating pattern was able to accommodate standard sizes!
We would like to introduce a case study of FIT power installation in a rental apartment. There were block walls of varying heights built alternately, but there were no retaining walls, posing a risk of toppling during an earthquake. However, since it faced the parking lot, constructing new retaining walls would have compromised convenience, and rebuilding would have significantly exceeded the budget, leading to hesitation in taking measures. After the installation, there were no large-scale construction works, and the construction costs were kept low due to the reduced scope of work. The pathway can be used without any differences from before. 【Case Overview】 ■ Issues - There were no retaining walls for the block walls of varying heights, posing a risk of toppling during an earthquake. - New construction would compromise convenience and exceed the budget significantly. ■ Solutions - There were no large-scale construction works, and construction costs were kept low due to the reduced scope of work. - Standard sizes were used to accommodate the alternately built block walls. *For more details, please refer to the related links or feel free to contact us.
Slate cover - New item for indirect dust-free construction method.
We will install a lock-on fitting onto the existing slate hook bolts, and then newly install purlins above it to construct the Yamato cover roof. The dust-free method allows for indoor operations during construction without generating any debris.
Compatible with overlapping folded plate roofs of types 88, 150, and S60! Fewer components and easy installation.
KS Hold Light can be installed on standing seam metal roofs with solar power generation systems. Made of aluminum, it is a lightweight and corrosion-resistant bracket. (JIS C 8955:2017 compliant) 【Features】 ■ Compatible with standing seam types such as Type 88, Type 150, and Type S60. ■ The brackets for securing the modules can be used interchangeably for both end and mid sections. ■ Lightweight and highly corrosion-resistant due to aluminum construction. ■ Secured with a single roof bolt. ■ Compatible with various module thicknesses (H30, 32, 35, 40). ■ Allows for fine adjustments of ±20mm by sliding the upper part of the bracket. *For more details, please refer to the PDF document or feel free to contact us at the information below. Solar & Eco Business Division Contact Information https://daidohant.com/contact/ 06-6190-9936 Tags: Solar, Solar Panels, Solar Power Generation Systems, Solar Power, Decarbonization, Carbon Neutral, SDGs, Roofing Work, Renovation, EPC, PPA, Energy Saving, Renewable Energy, Storage Batteries
High corrosion-resistant specifications that are strong against rust and corrosion! Snow stop hardware that can eliminate its presence.
"Ke-CELL" is a snow stop fixture designed to blend in and minimize its presence, harmonizing with the horizontal lines of the roof. The product is made of all stainless steel (SUS304) with a black coating, which is resistant to rust and corrosion, featuring high corrosion resistance. Despite its appearance, it effectively stops snow. 【Features】 ■ Minimizes presence ■ High corrosion resistance for peace of mind ■ Performance is proven ■ Made of all stainless steel (SUS304) *For more details, please refer to the catalog or feel free to contact us.
吊りボルト（W3/8）に簡単施工！
『ニチサポート 感知器用』は、吊りボルト（W3/8）用の感知器取付金具です。 製品前面から摘みを回すだけの簡単施工。 絶縁効果のある塩ビ一体板で、ブッシングの取付けが不要です。 【特長】 ■吊りボルト（W3/8）にねじ留め不要で取付け（ねじを別途使用でより強固に） ■絶縁効果の有る塩ビ製一体型板で、ブッシングの取付けが不要 ■ベースを留める際のビスは本体に装着済み ※詳しくはPDFをダウンロードしていただくか、お気軽にお問い合わせください。
Fixed brackets for partitions that do not require alignment of box depth.
The "E-type Fixed Bracket for Partitions, Both-End Support Type S" is a bracket that can be fixed at both ends for lightweight partitions. It can accommodate partition intervals from 250mm to 600mm in two sizes. It can be bent to match the box depth, eliminating the need for alignment with the box depth. 【Features】 ■ Graduated markings of 36, 47, and 57, compatible with multiple box depths ■ Box installation can be directly attached to the main body with screws *For more details, please download the PDF or feel free to contact us.
The definitive version of the stop fastener.
Compatible with all types of formwork, including steel foundation formwork and plywood formwork. After construction, the ear section can be easily folded. 【Features】 ○ Strength is improved compared to conventional products, allowing for safe use ○ Compatible with all steel foundation formwork and plywood formwork For more details, please contact us or download the catalog.
Full-motion wall mount bracket for displays with multi-directional adjustability!
The 『FLM-003-BK』 is a full-motion wall mount that allows for all adjustments including front and back, left and right, tilting forward and backward, and horizontal adjustments. The distance from the mounting wall to the back of the display is 64 to 484 mm, and the recommended display size is 26 to 43 inches. Our mount comes with a "level" included. It features a magnet for easy attachment and detachment, allowing for constant level checking regardless of the installation procedure, providing peace of mind during installation. 【Features】 ■ Type: Full Motion ■ Color: BLACK ■ TV Compatibility: 26 to 43 inches (recommended) ■ Weight: 2.8 kg ■ Load Capacity: 30 kg *For more details, please download the PDF or feel free to contact us.
脱着可能な水平器付きで施工も簡単！機能性とデザイン性を追求した壁掛金具
『TLT-002-BK』は、機能性とデザイン性を追求し、 設置した際の見た目の美しさと省スペースを両立する壁掛金具です。 マグネットで脱着可能な水平器が付属。 手順問わず常に水平確認が行えるため、安心して施工できます。 【主な仕様】 ■推奨ディスプレイ：40～70 V ■耐荷重：50 kg ■製品重量：2.2 kg ■前傾/後傾：5°/15° ※詳しくはPDF資料をご覧いただくか、お気軽にお問い合わせ下さい。
脱着可能な水平器付きで施工も簡単！機能性とデザイン性を追求した壁掛金具
『TLT-003-BK』は、機能性とデザイン性を追求し、 設置した際の見た目の美しさと省スペースを両立する壁掛金具です。 マグネットで脱着可能な水平器が付属。 手順問わず常に水平確認が行えるため、安心して施工できます。 【主な仕様】 ■推奨ディスプレイ：26～55 V ■耐荷重：35 kg ■製品重量：1.9 kg ■前傾/後傾：5°/15° ※詳しくはPDF資料をご覧いただくか、お気軽にお問い合わせ下さい。
脱着可能な水平器付きで施工も簡単！機能性とデザイン性を追求した壁掛金具
『TLT-004-BK』は、機能性とデザイン性を追求し、 設置した際の見た目の美しさと省スペースを両立する壁掛金具です。 マグネットで脱着可能な水平器が付属。 手順問わず常に水平確認が行えるため、安心して施工できます。 【主な仕様】 ■推奨ディスプレイ：40～70 V ■耐荷重：60 kg ■製品重量：1.9 kg ■前傾/後傾：0°/8° ※詳しくはPDF資料をご覧いただくか、お気軽にお問い合わせ下さい。
脱着可能な水平器付きで施工も簡単！機能性とデザイン性を追求した壁掛金具
『STD-004-BK』は、機能性とデザイン性を追求し、 設置した際の見た目の美しさと省スペースを両立する壁掛金具です。 マグネットで脱着可能な水平器が付属。 手順問わず常に水平確認が行えるため、安心して施工できます。 【主な仕様】 ■推奨ディスプレイ：26～43 V ■耐荷重：30 kg ■製品重量：0.7 kg ※詳しくはPDF資料をご覧いただくか、お気軽にお問い合わせ下さい。
Weld-free fastening hardware
It is possible to secure the steel plates faster and more reliably than conventional steel plate welding work. Additionally, it helps prevent accidents caused by damage to the welded parts. Since welding is not required, construction can be carried out regardless of the weather, and there are no costs associated with removing weld marks or repairs. By temporarily securing the lower part of the fittings to the steel plates in advance, accidents such as finger pinching during installation and removal can be prevented.
