Metal fittings - メーカー・企業376社の製品一覧とランキング | イプロス

更新日： 集計期間:Mar 18, 2026～Apr 14, 2026
※当サイトの各ページの閲覧回数を元に算出したランキングです。

Metal fittingsのメーカー・企業ランキング

更新日： 集計期間:Mar 18, 2026～Apr 14, 2026
※当サイトの各ページの閲覧回数を元に算出したランキングです。

  1. 栄信 Aichi//Building materials, supplies and fixtures manufacturers
  2. エヌパット Osaka//Building materials, supplies and fixtures manufacturers
  3. 中央ビルト工業 Tokyo//Building materials, supplies and fixtures manufacturers
  4. 4 null/null
  5. 5 丸井産業 Hiroshima//Construction Consultant
企業ランキングへ

Metal fittingsの製品ランキング

更新日： 集計期間:Mar 18, 2026～Apr 14, 2026
※当サイトの各ページの閲覧回数を元に算出したランキングです。

  1. The "Wankachi" hardware for layered folding plates has been renewed! 栄信
  2. Can fly 20m! Large span box-type truss material 'Multi Truss A' 中央ビルト工業
  3. H-shaped steel beam suspension fixture "Revo Grip" エヌパット
  4. 4 Solar panel mounting bracket "Horizontal Roof Clamp" 栄信
  5. 5 Construction Catalog Ver.1 丸井産業

Metal fittingsの製品一覧

481～510 件を表示 ／ 全 1256 件

表示件数
Framework scaffolding material "Scaffold Receiving Bracket"

Framework scaffolding material "Scaffold Receiving Bracket"

Easily and securely installable! The work is safe, and the alignment of bolt holes can be done quickly.

The "Scaffold Receiving Bracket" is a framework scaffold material that uses T-shaped steel for both the upper and lower chords, providing high strength. Compared to conventional angle brackets, it has a wider upper surface, enhancing safety. Additionally, the lattice material uses medium-width flat steel, which is welded to the T-shaped steel, resulting in a non-protruding I-shaped cross-section that gives it an elegant appearance. Furthermore, the mounting plate has angles fixed on it and features four mounting holes, allowing it to be attached using anchor bolts provided in the structure. 【Features】 ■ High strength ■ Enhanced safety (compared to conventional angle brackets) ■ Elegant appearance ■ Safe operation with quick alignment of bolt holes ■ Easy and secure installation of the bracket *For more details, please refer to the PDF document or feel free to contact us.

  • 企業：HLM
  • 価格：Other
  • Scaffolding and Support Materials
  • Metal fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Wedge fastening sheet morning glory "Speek"

Wedge fastening sheet morning glory "Speek"

Further improve "safety"! Solve issues and problems to achieve "efficiency".

"Speek" is a sheet type that can be installed with just one hammer, improving productivity. By using our original wedge-type fittings, the ease of installation is significantly enhanced. The reduction in weight allows for rapid storm protection. Additionally, with only 9 parts, the risk of loss is reduced, improving management. 【Features】 ■ 38% weight reduction ■ Less than half the number of parts ■ Shortened installation time due to the wedge system ■ Safe and easy storm protection *For more details, please download the PDF or feel free to contact us.

  • Scaffolding and Support Materials
  • Metal fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
iPad enclosure wall mount bracket - Space

iPad enclosure wall mount bracket - Space

Considering breathability, part of the corners and back are open! Easy lock and release with a key.

The "iPad Enclosure Wall Mount - Space" is an enclosure compatible with various iPads. It allows for continuous charging by routing cables through the back, and even when locked with a key, it is designed to enable the use of all iPad functions. It can be used for various displays utilizing iPads in shops, POS systems, receptions, education, healthcare, and more. 【Features】 ■ Compatible with various iPads, iPad Pro, iPad Air, and iPad mini ■ Aluminum alloy enclosure designed to prevent unauthorized removal ■ Storage for charging cables ■ 100×100mm VESA standard ■ Compatible with our security wire *For more details, please refer to the PDF document or feel free to contact us.

  • Other fixtures and fittings
  • Metal fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
VESA wall mount - cable management mount

VESA wall mount - cable management mount

Simple and slim, securely fixed with screws! Organize cables inside.

The "VESA Wall Mount Bracket - Cable Management Mount" is a 100×100mm VESA standard compatible mount. It is compatible with our enclosures and allows for wall mounting that slightly elevates the unit from the wall. It is also possible to store charging cables and other items inside. Please feel free to contact us if you have any inquiries. 【Features】 ■ 100×100mm VESA standard ■ Made of high-quality aluminum alloy ■ Organizes cables inside ■ Simple and slim, securely fixed with screws *For more details, please refer to the PDF document or feel free to contact us.

  • Other fixtures and fittings
  • Metal fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Space Swing Arm <Surface>

Space Swing Arm <Surface>

The arm length is a maximum of 25 cm with two joints! Tilt, pan, and swing to your preferred angle.

The "Surface Enclosure Tilt Adjustable Wall Mount Bracket – Space Swing Arm" is a set of enclosure and swing arm compatible with Surface Pro 3, Pro 4, Pro 2017, Pro 6, Pro 7, Surface Go, Go 2, and Go 3. The arm can be mounted on flat surfaces such as tables or countertops, or on walls, allowing for swinging in both horizontal and vertical directions. Additionally, the enclosure part can be rotated. The arm length is up to 25 cm and features two joints, making it comfortable to use even in limited spaces. 【Features】 ■ Compatible with various Surface Pro and Surface Go models ■ Made of high-quality aluminum alloy ■ Easy lock and release with a key ■ Tilt, pan, and swing to your preferred angle ■ Compatible with our security wire *For more details, please refer to the PDF document or feel free to contact us.

  • Other fixtures and fittings
  • Metal fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Can be assembled without single pipe reinforcement on the building site even over 45m! Next-generation scaffolding lock series.

Can be assembled without single pipe reinforcement on the building site even over 45m! Next-generation scaffolding lock series.

The allowable load-bearing capacity has been improved by 30% compared to conventional wedge-type scaffolding! With the increase in allowable load-bearing capacity, we have achieved excellent durability and safety.

The next-generation scaffold lock series meets the definition of next-generation scaffolding and achieves the "stability of frame scaffolding" and the "convenience of traditional wedge-type scaffolding." By adopting a new shape lock system, the allowable load-bearing capacity (buckling strength) is increased by 30% compared to traditional wedge-connection scaffolding! *This is based on test values using a screw-jack type base fitting with a height of 350mm. It significantly suppresses vertical and horizontal swaying, allowing assembly without reinforcing the vertical pipes even at heights over 45m. Installation is as simple as inserting the wedge into the pocket and striking it with a hammer. Additionally, it supports large assemblies and large disassemblies, contributing to a significant improvement in work efficiency. 【Features】 ■ Standard construction uses a pre-installed handrail method ■ Handrail with a locking function ■ Outstanding allowable load-bearing capacity due to the new shape lock system ■ 1800mm floor height ■ Large assembly and disassembly operations possible with a crane ■ System approval for this scaffold and formwork support ■ NETIS registered product *For more details, please refer to the PDF materials or feel free to contact us. (Please conduct strength calculations based on actual assembly conditions to confirm safety.)

  • Scaffolding and Support Materials
  • Metal fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Special fixing hardware "Bombe Rack" for preventing container tipping.

Special fixing hardware "Bombe Rack" for preventing container tipping.

Preventing container tipping is easy with Rack Raku! Choose from three types depending on the installation situation and wall material!

"Bonberakku" is a dedicated fixing device for preventing the tipping of containers. By using this product, it is possible to reduce the amplitude of container vibrations and the load applied to belts and chains compared to simple chaining. The belt and chain can each secure one container with a single unit, and the main body is made of aluminum, making it effective against rust due to the use of a cylinder belt. 【Features】 ■ Reduces the amplitude of container vibrations and the load on belts and chains compared to simple chaining. ■ Complies with LP gas facility installation standards and handling guidelines. ■ The belt and chain can each secure one container with a single unit. ■ The main body is made of aluminum, making it effective against rust due to the use of a cylinder belt. ■ Three types are available to suit installation conditions and wall materials. *For more details, please refer to the PDF document or feel free to contact us.

  • Safety and consumables
  • Metal fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Non-welding method hardware "Tetsukabuto"

Non-welding method hardware "Tetsukabuto"

Separators for W5/16, W3/8, and W1/2 are available! The model number and size are engraved on the product body.

"Tetsukabuto" is a separator mounting bracket for rebar using a rebar non-welding method. It is suitable for removing separators from rebar. In addition to providing stable tensile strength, its structure prevents nuts from coming loose, which helps prevent loss or dropping during work. We also offer "nut-attached" versions that can be manufactured according to W5/16, W3/8, and W1/2 separators, as well as "rebar connection types" that are suitable for horizontally tying rebar together. 【Features】 ■ Suitable for removing separators from rebar ■ Provides stable tensile strength ■ The structure prevents nuts from coming loose, which helps prevent loss or dropping during work ■ The product body is engraved with type and size *For more details, please refer to the PDF materials or feel free to contact us.

  • Work tools
  • Parts and Materials
  • Metal fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Camera wall mount bracket 'KT-CAM1'

Camera wall mount bracket 'KT-CAM1'

Camera wall mount bracket that allows storage of AC adapter and excess cable length inside the box.

The "KT-CAM1" is a wall mount bracket for the Panasonic AW-HE60 and Sony BRC-H900/Z700 cameras. It can be installed with either camera. Additionally, the AC adapter and excess cables can be stored inside the box. 【Specifications】 ■External dimensions: W206.6mm × H150mm × D324mm ■Material: 1.6t steel, Munsell 5Y 7/1, semi-gloss baked paint finish *For more details, please download the PDF or contact us.

  • Security cameras and surveillance systems
  • Metal fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Reinforced concrete fixing accessory "Escro Band"

Reinforced concrete fixing accessory "Escro Band"

As long as it is within the load capacity, it can be used with any manufacturer or diameter! Introduction to rebar fastening fixtures.

The "Escrow Band" is a rebar fixing device that can be easily installed, improving construction capability and ensuring quality (such as cover). We offer a lineup that includes the "Standard Type" for simultaneous installation with the Kanzashi rebar, the "Diagonal Type" for post-installation and setup, and the "L Type" for fixing column and beam corners. Compatible sizes can start from combinations of D16 or larger, and we are open to consultations for other shapes and requests. 【Features】 ■ Compatible sizes can start from combinations of D16 or larger ■ Easy to install ■ Improved construction capability ■ Quality can be ensured ■ Can be used with any manufacturer or large diameter as long as it is within load capacity *For more details, please refer to the PDF materials or feel free to contact us.

  • Steel bar construction
  • Metal fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Rental gondola system

Rental gondola system

We offer a wide range of options tailored to your needs!

We offer a rental gondola system that can be used for various tasks. You can easily rent chair-type gondolas, deck-type gondolas, and equipment starting from one day. Please feel free to contact us if you have any requests. 【Lineup】 ■ Deck-type gondolas - Long type - Standard type: mid-suspension type, outer-suspension type, dual-use type - Narrow type ■ Chair-type gondolas *For more details, please download the PDF or feel free to contact us.

  • Equipment leasing and rental
  • Construction machinery leasing and rental
  • Metal fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Insulation Fitting "SH"

Insulation Fitting "SH"

Set with one hand and complete in 1, 2, or 3 seconds! Insulation fittings for corner hatches with fire resistance certification.

We offer the "SH" insulation bracket for corner joints, which can be easily installed with one hand. There is no need to loosen the nut and open it with both hands. The shape of the bottom part, which excels in stability, and the box-shaped design provide exceptional strength. 【Features】 ■ Can be placed with one hand for easy installation ■ Maintains the bracket's opening until the screws are tightened ■ Improved workability ■ Exceptional strength due to a design with excellent stability *For more details, please download the PDF or feel free to contact us.

  • Joining and fastening materials
  • Reinforcement and repair materials
  • Metal fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Comprehensive Catalog Functional Hardware [Digest Edition]

Comprehensive Catalog Functional Hardware [Digest Edition]

Introducing hardware related to audio equipment! 'Futaba Metal Industry CATALOG Vol.12'

This catalog is a digest version of the comprehensive catalog 'Futaba Metal Industry CATALOG Vol.12,' which features functional hardware handled by Futaba Metal Industry Co., Ltd. Our products focus on the product development concepts of our customers, helping to enhance the added value and competitiveness of products with mechanisms that do not compromise product design, image, or convenience. By participating from the early stages of product development, we provide unique mechanisms tailored to customer needs, offering a variety of materials including steel, aluminum, resin, and rubber. [Contents] ■ Glass hinges ■ Hinges ■ Auto hinges ■ Push latches ■ Catch receivers, etc. *This PDF is a digest version. Please contact us if you need the full version. *For more details, please download the PDF or contact us.

  • Subsidiary materials
  • Metal fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Zeslock Design and Construction Guide Catalog

Zeslock Design and Construction Guide Catalog

Publication of design and construction guidelines for place-driven piles, continuous underground walls, and assembly of rebar / non-welded fittings!

This catalog introduces the design and construction guidelines for 'Zeslock,' handled by Shin Narita Sogo Co., Ltd. Our product is a "screw fastening type" mechanical joint for place-driven piles and continuous underground walls/reinforcement cage assembly, featuring a non-welded fitting. It includes a "Zeslock Product Application List," as well as information on various product applications, design strengths, installation procedures, specifications (corresponding rebar sizes), and construction photos. [Contents] ■ Zeslock / Application categories, product dimensions, installation procedures ■ Technical Note 1: Reference Guidelines ■ Technical Note 2: What is a Torsion Prevention Structure Fitting? ■ Technical Note 3: Buckling Countermeasure Proposals / Model Experiments (Reference) ■ Technical Note 4: Calculation of Forces Acting on the Overlap Joint of Axial Reinforcement *For more details, please refer to the PDF document or feel free to contact us.

  • Fittings
  • Joining and fastening materials
  • Joints between components
  • Metal fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Entrance Check Mirror "Warren (Convex Type)"

Entrance Check Mirror "Warren (Convex Type)"

Countermeasure against foreign object contamination in food factories! A super lightweight, compact mirror that can be simply hung up.

The "Warren (Convex Type)" is an ultra-lightweight entrance check mirror with good reflectivity compared to glass. In food factories, for hygiene management, checks are conducted in front of the mirror to ensure that uniforms are worn correctly and that foreign substances such as hair and debris are removed before entering the production line. If this mirror were to break or shatter, there would be a risk of foreign matter contaminating the production line. This product is made of a special plastic called "polycarbonate," which does not break even when struck with a hammer. Additionally, it can be installed anywhere along the flow line, such as in front of locker rooms or air showers. 【Features】 ■ Made of special plastic "polycarbonate" ■ Does not break even when struck with a hammer ■ Compact and space-saving due to its convex shape ■ Can be mounted on the wall with just one screw *For more details, please refer to the external link page or feel free to contact us.

  • Sanitary fixtures
  • Safety and consumables
  • Metal fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Wire Pulling Rod One-Touch Tool

Wire Pulling Rod One-Touch Tool

It is possible to improve the efficiency of drop fiber optic installation work and other tasks!

The "Pull Rod One-Touch Tool" is a product that allows all connections of parts used for installation work inside spiral hangers to be made with a single touch. All attachment and detachment tasks can be performed with one touch, improving work efficiency. Additionally, it features a structure with minimal protrusions, making it less likely to snag. You can simply insert the drop fiber optic cable to grip it, eliminating the need for cumbersome vinyl tape wrapping and reducing material waste. 【Dimensions】 ■ Tip Tool Fitting Specifications: φ13x60(mm) 40(g) ■ Pull Rod Fitting: φ13x40(mm) 15(g) ■ Drop Joint Fitting: φ13x100(mm) 55(g) *For more details, please download the PDF or feel free to contact us.

  • Work tools
  • Piping and electrical wiring materials
  • Metal fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Reinforcement hardware "Tipping Prevention Base"

Reinforcement hardware "Tipping Prevention Base"

No need to drill holes in the floor or walls! It firmly absorbs the forces applied during shocks and vibrations at the base, protecting you from "shaking due to earthquakes or collisions."

The "Anti-Tipping Base" is a reinforcement bracket for shelves designed to prevent swaying and tipping. Installation is completed with just one screwdriver, and there is no need to drill holes in the floor or wall. It effectively absorbs the forces exerted during impacts and swaying at the base. Additionally, by increasing the contact area between the ground and the shelf to a larger surface rather than just the support posts, it distributes the load and protects the shelf from falling or swaying due to forward tilting. 【Features】 ■ Protects against swaying from "earthquakes and collisions" ■ Effectively absorbs forces during impacts and swaying at the base ■ Installation is completed with just one screwdriver ■ No need to drill holes in the floor or wall *For more details, please refer to the PDF document or feel free to contact us.

  • Shelves and racks
  • Terminal board/equipment storage rack
  • Safety and consumables
  • Metal fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Welding-free method "CUP Method" <Materials Presented>

Welding-free method "CUP Method" <Materials Presented>

For preventing buckling of the rebar cage in cast-in-place piles. A highly reliable, weld-free method backed by approximately 9,000 pile achievements and a safe construction cycle!

The "CUP Method" ensures safety assessments for all piles, including suspension analysis, buckling analysis, and connection part analysis. It determines the position of reinforcement ring components and the arrangement of fittings to prevent excessive loads on the fittings, making it a non-welding method. The risk of buckling is quantified and visualized, allowing for quantitative comparisons. Our company has extensive construction achievements based on method standards, enabling us to propose a safe zone that does not experience buckling based on these achievements. 【Features】 ■ Prevents buckling of the rebar cage in cast-in-place piles. ■ Approximately 9,000 successful cases of CUP method all-casing piles. ■ Economical method through the recovery and reuse (repurposing) of fittings. ■ Excellent workability through bolt fastening. ■ Various applications are possible, such as the assembly of core rebar for semi-rigid connections at the pile head. 〈Patent Information〉 ■ Special suspension reinforcement ring: Design method for reinforcement rings, rebar cages, and rebar cages (Patent 6678806). ■ CUP method buckling analysis: Quantitative comparison through the numerical representation of achievements, visualizing risk (Patent 7128108). * You can view materials introducing issues related to buckling measures for rebar cages via "PDF Download." Please feel free to contact us for inquiries.

  • Special Construction Method
  • Metal fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
[Catalog] Rain Gutter Fittings

[Catalog] Rain Gutter Fittings

A lineup of residential and non-residential rain gutter fittings such as eaves and other related items!

This catalog features rain gutter fittings handled by Otis Co., Ltd., a manufacturer of building materials such as gutters, roofing materials, and fasteners. We offer a wide range of products, including residential fittings for square gutters such as those for Eslon and Panasonic, as well as fittings for large square gutters in various types like front-high wide type, front-high type, folding plate, and valley type. [Contents] ■ Residential fittings for square gutters ■ Residential fittings for half-round gutters ■ Support fittings for vertical gutters ■ Fittings for large square gutters ■ Fittings for vertical gutter pipes, etc. *For more details, please download the PDF or feel free to contact us.

  • Roof and gutter construction
  • Others/Roofing materials (shingles, cement, steel sheets, aluminum)
  • Metal fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Column fixing bracket: middle column socket wrench

Column fixing bracket: middle column socket wrench

【662 yen (including tax)】Excavate the old fittings buried in the floor and install a new support bracket! It will serve as a receptacle for the shutter's middle pillar.

This product is a bracket that secures the center post of a wide shutter. Since it is a bracket embedded in the floor, it will need to be excavated and replaced with a new one. The manufacturing dimensions will be made in millimeter units. Therefore, the product can be made to fit the current garage dimensions. If you have any questions, please feel free to contact us. 【Features】 ■ Acts as a receptacle for the shutter center post ■ Bracket embedded in the floor ■ Product dimensions accepted in millimeter units *For more details, please refer to the external link page or feel free to contact us.

  • Other fittings
  • Safety Supplies
  • Metal fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
[Anzen Adjuster Construction Case] Installation of Medical Refrigerator

[Anzen Adjuster Construction Case] Installation of Medical Refrigerator

Introducing a case of installing seismic isolators in the pharmaceutical research building and drug discovery building.

We would like to introduce a case where an anti-vibration adjuster was used for the installation of a medical refrigerator. The installation involved cutting L-shaped brackets, and if the length of the bolts was a concern, they were cut separately. In the drug discovery building, the L-shaped brackets were installed at fixed positions after cutting the bolts, and the installation was completed. The installation details are thoroughly introduced with images in the published catalog. [Installation Overview] ■ Location: 1st Floor, Pharmaceutical Research Building, Drug Discovery Building ■ Content: Installation after cutting L-shaped brackets and bolts *For more details, please refer to the PDF document or feel free to contact us.

  • Safety and consumables
  • Metal fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Uniqlo Hayauuma Connection Fitting 'A12214'

Uniqlo Hayauuma Connection Fitting 'A12214'

With various combinations of connection fittings, it is possible to assemble a variety of frames and brackets!

We would like to introduce the Uniqlo Hayauuma connection fitting 'A12214' that we handle. This product is made of SUS304 with an electro-galvanized finish. It can also be used with L3×40 angles. Please feel free to contact us when you need it. 【Specifications】 ■ Material: SPHC ■ Surface treatment: Electro-galvanized finish ■ Projection method: 3RD ANGLE PROJECTION ■ Scale: 1:3 *For more details, please download the PDF or feel free to contact us.

  • Parts and Materials
  • Metal fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Various Back Mounting Hardware Multi Back Mounting Hardware 'MLT-1028E'

Various Back Mounting Hardware Multi Back Mounting Hardware 'MLT-1028E'

A variety of back brackets that can share various stands and wall-mounted fixtures are now available!

We handle the multi rear mount 'MLT-1028E'. It has scales, allowing for smooth horizontal pitch adjustment and VESA alignment. By loosening the screws on the metal parts, it can slide horizontally. In addition, we also offer various "rear mounts" and "rear plates" made by RATEC. 【Features】 ■ Compatible with VESA standards for vertical dimensions of 200, 300, 320, 330, 350, 370, 400, 430, and 450 ■ Horizontal dimensions can accommodate VESA standards up to 660 with free dimensions ■ By loosening the screws on the metal parts, it can slide horizontally ■ The scales allow for smooth horizontal pitch adjustment and VESA alignment ■ Weight: approximately 4kg / Basic color: Black *For more details, please refer to the PDF document or feel free to contact us.

  • Safety and consumables
  • Metal fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Various wall-mounted brackets for back-mounted brackets.

Various wall-mounted brackets for back-mounted brackets.

The basic color is black! We will introduce various types of wall mounting brackets for fixed-angle 0° rear hardware.

We handle various types of wall-mounted brackets for back brackets manufactured by RATEC. Our lineup includes options for "250p," "372p," "450p," and "520p." The basic color is black, and they are fixed types at an angle of 0°, with different plate thicknesses. If you need to place an order, you can submit drawings. When making a request, please provide information about the pitch size of the back bracket. 【Features】 ■ Fixed type at an angle of 0° ■ Different plate thicknesses ■ Basic color: Black *For more details, please refer to the PDF document or feel free to contact us.

  • Safety and consumables
  • Metal fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
[Achievements] Measures to prevent ceiling collapse of existing specified ceilings in factory expansion construction.

[Achievements] Measures to prevent ceiling collapse of existing specified ceilings in factory expansion construction.

Introducing measures to prevent ceiling collapse for existing specified ceilings in building expansion work! Factory (metal sheet manufacturing company)

Are you aware that if there is a "specific ceiling" in an existing building, it becomes non-compliant and the application for an extension cannot be accepted? For those of you who understand this but are struggling because you cannot stop your business activities, we would like to introduce our construction achievements. * A "specific ceiling" refers to a suspended ceiling that is over 6 meters high, with an area exceeding 200 m² and a mass exceeding 2 kg/m², installed in places used by people on a daily basis. <Overview of the target building> Factory (metal steel plate manufacturing company) Construction area: 503 m² Working days: 22 days * Fully operational 24 hours a day with Sundays off. Approximately 10 days off only during the New Year and May holidays. The work was concentrated by dividing the construction area into two sections, utilizing the New Year holidays (section 1) and the May holidays (section 2). * ERI confirmation certificate received [Overview of the plan change] Treatment of the specific ceiling in the existing building. For more details, please download the PDF or contact us.

  • Earthquake-resistant construction method
  • Metal fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Promotional Items: Steel Pipe Frame

Promotional Items: Steel Pipe Frame

Weighing approximately 1.4 kg, it is lightweight and easy to carry! It can be used at event venues for registration or as a marker.

We offer a "Steel Pipe Frame" that allows for simple booth decoration. With minimal contact with the ground, it is resistant to dirt and can be used both indoors and outdoors. The clamp-type pole holder accommodates tables with a thickness of 9 to 45 mm. Custom sizes can be created to suit your usage scenario. You can also create media in any size you prefer, making it suitable for unique booth decorations. Please feel free to contact us. 【Points】 ■ Allows for simple booth decoration ■ Minimal ground contact makes it resistant to dirt, suitable for indoor and outdoor use ■ Comes in a dedicated bag, weighing approximately 1.4 kg, making it easy to carry ■ The clamp-type pole holder accommodates tables with a thickness of 9 to 45 mm *For more details, please download the PDF or feel free to contact us.

  • Signs, banners, lanterns, and curtains
  • Metal fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Ceiling suspension hardware VB-10

Ceiling suspension hardware VB-10

This is a relay fitting that connects between the fixer when installing a capsule camera hung from the ceiling.

■Compatible Fixer (Optional) ■IW-31, IW-34, IW-37, IW-100 ■Compatible Cameras ・VCC-IR40AH/IR950EX/IR950HV/IR830AH/IR840AH/IR820 ・NCC-IR21T/IR20S ・NAC-IR90T

  • Security cameras and surveillance systems
  • Metal fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
LCD Monitor Wall Mount Bracket LCW-03

LCD Monitor Wall Mount Bracket LCW-03

It is a bracket for mounting an LCD monitor on the wall.

■Features 1. This is a mounting bracket for attaching color LCD monitors such as LCM-97, LCM-153, LCM-173, LCM-211HD, and LCD-AH221EDB-A to walls.

  • Security cameras and surveillance systems
  • Metal fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Sensor mounting bracket for overslide shutter BS-S3

Sensor mounting bracket for overslide shutter BS-S3

Sensor mounting bracket for overslide shutter BS-S3

For more details, please refer to the basic information.

  • Security Sensor Systems
  • Metal fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Metal fittingsに関連する検索キーワード

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.