Metal fittings(20mm) - List of Manufacturers, Suppliers, Companies and Products

Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.

Metal fittings Product List

91～105 item / All 115 items

Displayed results
Folding door hardware for interior doors "FSD-HDC"

Folding door hardware for interior doors "FSD-HDC"

Equipped with a soft-close feature that reduces impact during opening and closing! Also prevents forgetting to close the door.

The "FSD-HDC" is a folding door hardware recommended for space-saving indoor doors. The roller holding part is made of metal, and the damper sliding part is made of resin. Each component has been re-evaluated in terms of material to achieve quieter and smoother movement. By simply changing the fixed block at the top to a damper, it has become possible to support the soft close function on the opening side, which was previously difficult. 【Features】 ■ Soft close on both sides ■ Space-saving design ■ Non-rail design suitable for various usage scenarios ■ Smooth opening and closing ■ Double-opening design ■ Difficult to pinch fingers *For more details, please refer to the PDF document or feel free to contact us.

  • Interior/Interior Doors
  • Folding doors/accordion doors
  • Other fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
agria9600S

agria9600S

With a 10Lx2 fuel tank, approximately 6 hours of operation is possible! The fuel level can also be checked with the remote control.

We would like to introduce the 'agria9600S' that we handle. All electronic components are housed inside the E-box to protect them from dust, moisture, and vibration. To prevent the internal temperature from rising, it is equipped with a cooling system using a cooling fan. During servicing, simply removing the cover allows for easy access. Additionally, the new remote control features a large display that allows you to check the fuel level when it enters a dangerous incline. 【Features】 ■ Operates at angles up to 55° ■ Safe operation with remote control ■ Performance equivalent to 15 brush cutters or 1 tractor ■ Equipped with a high-output engine and drive motor ■ Work performance exceeds 5,000 m²/hour *For more details, please download the PDF or feel free to contact us.

  • Sweeping vehicles, grass cutting vehicles, road surface regeneration machines, snow removal machines

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
York Fitting "YS-1"

York Fitting "YS-1"

When working on an inclined surface! It prevents the belt from tightening around the waist, allowing for easier work.

Fujii Electric Co. offers "yoke fittings." Using yoke fittings prevents the belt from tightening around the waist while working on slopes, allowing for easier work. 【Features】 ■ Prevents the belt from tightening around the waist on slopes ■ Allows for easier work *For more details, please refer to the PDF document or feel free to contact us.

  • Safety and consumables

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Eagle II Horizontal Roofing Series Snow Stopper Bracket

Eagle II Horizontal Roofing Series Snow Stopper Bracket

A smart shape that matches the roof. Increased blade strength with edge folding and a strong bead.

The "Eagle II Horizontal Roofing Series" is a snow stop bracket compatible with horizontal roofs. It features a smart form that matches the roof, with edge folding and a strong bead to enhance the strength of the wings. We offer a wide lineup suitable for both retrofit (existing buildings) and pre-installation (new construction) applications. You can choose from various colors to match the appearance of your roof. 【Main Specifications】 ■ Wings - Plate thickness: 1.6mm (1.5mm for stainless steel) - Material: High corrosion-resistant steel plate, hot-dip galvanized, SUS304 ■ Feet - Plate thickness: 2.0mm - Material: High corrosion-resistant steel plate, hot-dip galvanized, SUS304 ■ Quantity 30 pieces *For more details, please refer to the PDF document or feel free to contact us.

  • Roof and gutter construction
  • Metal roof
  • Others/Roofing materials (shingles, cement, steel sheets, aluminum)

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
MIG ミッドグラブショートナー

MIG ミッドグラブショートナー

チェーンの中間で長さ調整ができる金具！

使用荷重 2.0～5.2ｔ 対応　Grade10 対応チェーン線径 8ｍｍ、10mm、13ｍｍ クイックピンを押し込んで回すだけでロックのON/OFFが手軽に切り替え可能。 任意の長さでチェーンを短くできるため、バランスの悪い吊り荷もバランスよく吊り上げることができます。 　

  • Bridge Construction
  • Crane and others
  • Road construction

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Waterproof sheet non-penetrating hanging hardware "Sheet Gripper"

Waterproof sheet non-penetrating hanging hardware "Sheet Gripper"

By tightening the rebar, smooth and reliable construction is possible! 【NETIS Registration Number: KT-190096-A】

The "Sheet Gripper" is a non-penetrating rebar support fixture that does not penetrate waterproof sheets. By tightening the rebar, smooth and reliable construction is possible. We offer the "Sheet Grip" for waterproof sheets with a thickness of 0.8mm and the "WT Gripper" for those with a thickness of 2.0mm. 【Features】 ■ NETIS Registration Number: KT-190096-A ■ Non-penetrating, does not penetrate waterproof sheets ■ Smooth and reliable construction is possible by tightening the rebar *For more details, please refer to the PDF document or feel free to contact us.

  • 2020-06-08_13h37_07.png
  • 2020-06-08_13h37_11.png
  • 2020-06-08_13h37_16.png
  • 2020-06-08_13h37_24.png
  • Waterproof sheet
  • Tunnel Materials
  • Tunnel construction

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Fall Prevention Locking Hardware 'DLP-LOCK1'

Fall Prevention Locking Hardware 'DLP-LOCK1'

Easily attachable during construction or inspection! Prevents falling accidents in advance!

"DLP-LOCK1" is a fall prevention locking device that can be used with all products in the LED spotlight SL series. By adding the DLP-LOCK1, the inherent locking function of the plug, combined with the fall prevention wire, ensures even greater safety. It is designed to be easily attached during installation or inspection. 【Features】 ■ Easily attachable during installation or inspection ■ Ensures greater safety by combining the locking function with the fall prevention wire ■ Dimensions: 39.44mm × 32.00mm ■ Weight: 3.0 grams ■ Material: SUS301 *For more details, please refer to the PDF document or feel free to contact us.

  • Joints between components

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Seismic reinforcement hardware "FIT Power" Type 14 for concrete block walls, etc.

Seismic reinforcement hardware "FIT Power" Type 14 for concrete block walls, etc.

Can be installed even in narrow areas like densely populated urban residential areas! Seismic reinforcement brackets that can achieve seismic retrofitting in a short period with minimal construction.

"FIT Power" is a seismic reinforcement fixture such as a concrete block wall that serves as a substitute for retaining walls. It keeps the maximum protrusion of the site-side angle post to about 65mm, allowing for passage even after installation, making it a convenient design for narrow lots and densely populated residential areas. Additionally, it can be tightened by a single worker from the site side, enabling a reduction in construction time. The FIT Power Type 14 is compatible with block walls of H1, 400mm from the road surface. *We also have models available for block walls ranging from H1,200 to 1,800mm. 【Features of FIT Power】 ■ Lock bolt pile foundation method - Ground friction force is seven times the weight - Shortened construction period and cost reduction ■ Round head bolts prevent free spinning ■ Design that maintains convenience even in narrow spaces - Residents can pass through even after installation - Component weight manageable by one person ■ Demonstration experiments conducted under the guidance of the Faculty of Engineering, Gifu University ■ Patent obtained as a "reinforcement structure and reinforcement member for walls" ■ Certified as a recommended disaster prevention product by the Japan Disaster Prevention Safety Association *For more details, please refer to the PDF materials or feel free to contact us.

  • Earthquake-proof and vibration-damping equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Seismic reinforcement hardware "FIT Power" Type 16 for concrete block walls, etc.

Seismic reinforcement hardware "FIT Power" Type 16 for concrete block walls, etc.

Can be installed even in narrow areas like densely populated urban residential areas! Seismic reinforcement brackets that can achieve seismic retrofitting in a short period with minimal construction.

"FIT Power" is a seismic reinforcement fixture such as a concrete block wall that serves as an alternative to retaining walls. It limits the maximum protrusion of the site-side angle post to about 65mm, allowing for passage even after installation, making it a convenient design for narrow lots and densely populated residential areas. Additionally, since tightening work can be done by one worker from the site side, it enables a reduction in construction time. The FIT Power Type 16 is compatible with block walls of H1, 600mm from the road surface. *We also have models available for block walls ranging from H1,200 to 1,800mm. 【Features of FIT Power】 ■ Lock bolt pile foundation method - Ground friction force is seven times the weight - Shortened construction period and cost reduction ■ Round head bolts prevent free spinning ■ Design that maintains convenience even in narrow spaces - Residents can pass through even after installation - Component weight manageable by one person ■ Demonstration experiments conducted under the guidance of the Faculty of Engineering, Gifu University ■ Patent obtained as "Reinforcement structure and reinforcement members for walls" ■ Certified as a recommended product by the Japan Disaster Prevention Safety Association *For more details, please refer to the PDF materials or feel free to contact us.

  • Earthquake-proof and vibration-damping equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Seismic reinforcement hardware "FIT Power" Type 18 for concrete block walls, etc.

Seismic reinforcement hardware "FIT Power" Type 18 for concrete block walls, etc.

Can be installed even in narrow areas like densely populated urban residential areas! Seismic reinforcement brackets that can achieve earthquake resistance in a short period with minimal construction.

"FIT Power" is a seismic reinforcement fixture such as a concrete block wall that replaces retaining walls. It keeps the maximum protrusion of the site-side angle post to about 65mm, allowing for passage even after installation, making it a convenient design for narrow lots and densely populated residential areas. Additionally, it can be tightened by one worker from the site side, enabling a reduction in construction time. The FIT Power Type 18 is compatible with block walls of H1, 800mm from the road surface. *We have models available for block walls ranging from H1,200 to 1,800mm. 【Features of FIT Power】 ■ Lock bolt pile foundation method - Ground friction force is seven times the weight - Shortened construction time and cost reduction ■ Round head bolts prevent free spinning ■ Design that maintains convenience even in narrow spaces - Residents can pass through even after installation - Component weight manageable by one person ■ Demonstration experiments conducted under the guidance of the Faculty of Engineering, Gifu University ■ Patented as "Reinforcement structure and reinforcement members for walls" ■ Certified as a recommended disaster prevention product by the Japan Disaster Prevention Safety Association *For more details, please refer to the PDF document or feel free to contact us.

  • Earthquake-proof and vibration-damping equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Connection and adjustment fittings "VIP Shackle VV-SCH/VC-SCH"

Connection and adjustment fittings "VIP Shackle VV-SCH/VC-SCH"

The pin rotates 360 degrees at all times! It is used to connect the chain and the fittings.

The VIP Shackle VV-SCH/VC-SCH is used to connect chains and fittings. The pin rotates 360 degrees at all times, preventing uneven wear. In the ever-evolving work environment, the "safety," "durability," and "usability" of the products used are always required to meet high standards. RUD, which has been pursuing further challenges and safety since its founding, will continue to evolve and accelerate in the work environment that is advancing. 【Features】 ○ The pin rotates 360 degrees at all times, preventing uneven wear ○ Chain nominal diameter: 6 to 16mm ○ Basic working load: 1.2 to 22.4 tons ○ Weight: 0.1 to 5.9kg For more details, please contact us or download the catalog.

  • Work tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Connection and adjustment fittings "VIP Insulation Sling Set V-SIG"

Connection and adjustment fittings "VIP Insulation Sling Set V-SIG"

It prevents overcurrent from flowing into cranes and other equipment during welding operations while lifting.

The VIP Insulated Sling Set V-SIG is an insulated shackle compatible with 1,000V. It prevents overcurrent from flowing into cranes and hoists during welding operations while lifting. In the ever-evolving work environment, there is a constant demand for high standards of "safety," "durability," and "user experience" in the products used. RUD, which has been pursuing further challenges and safety since its founding, will continue to evolve and accelerate in the work environment that spans over a century. 【Features】 ○ Insulated shackle compatible with 1,000V ○ Chain diameter: 6 to 16mm ○ Basic working load: 1.2 to 8.0 tons ○ Weight: 1.4 to 13.1kg For more details, please contact us or download the catalog.

  • Hoist/Crane
  • Work tools
  • Crane and others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Roofing hardware

Roofing hardware

Details will be introduced using diagrams! Our company's building hardware is also available for custom processing.

We handle "ridge fittings" for roofing materials. The details of this product are introduced using diagrams. In addition, we also offer a "stainless steel ridge frame" that can be extended with joint pieces up to a length of 6 shaku, as well as high-quality stainless steel products that do not corrode, such as "tile fixing devices." 【Features】 ■ Types range from H-40 to 120mm ■ Custom processing is also available *For more details, please refer to the PDF materials or feel free to contact us.

  • Solar mounting brackets and fittings (solar fittings and protective sheets)

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Japanese-style roof snow guard fittings "Wagata Fuugetsu" for tile roofs.

Japanese-style roof snow guard fittings "Wagata Fuugetsu" for tile roofs.

The beauty of curves that blends with harmony. Snow stop fittings with excellent design that match traditional Japanese tiles.

"Wagata Fuugetsu" is a snow stop fixture with excellent design that matches the beautiful curves and rich colors of traditional Japanese tiles. It harmonizes naturally with the tiles, resulting in a beautifully finished overall appearance of the roof. We offer a lineup suitable for both retrofit (existing buildings) and pre-installation (new buildings) types. You can choose from various colors to match the appearance of your roof. 【Product Specifications】 ■Material: SUS304 ■Thickness: Blade = 1.5mm, Foot = 2.0mm *For more details, please refer to the PDF document or feel free to contact us.

  • Metal roof
  • Others/Roofing materials (shingles, cement, steel sheets, aluminum)
  • Roof and gutter construction

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Directly Attached Ceiling Substructure Fitting "J-M Fitting"

Directly Attached Ceiling Substructure Fitting "J-M Fitting"

Introducing flexible and low-cost ceiling system parts that meet your needs!

"J-M Bracket" is a direct-attachment ceiling substrate bracket that can use conventional lightweight substrate materials, allowing for cost-effective construction of seismic and wind pressure-resistant substrates. It is possible to carry out construction while checking the marking position through the slit of the base bracket. Level adjustment work can be done by temporarily placing the substrate on lip channel steel, just like with conventional lightweight substrates. Additionally, the method of attaching the bracket to the furring channel combines both hook and screw fastening, ensuring safe use. 【Features】 ■ Flexible & Low Cost ■ Design of non-suspended seismic and wind pressure-resistant ceilings is possible ■ Easy level adjustment (±10mm from the reference point) ■ Level adjustment work can be done after temporarily placing the substrate on lip channel steel ■ Construction can be performed while checking the marking position through the slit of the base bracket ■ The method of attaching the bracket to the furring channel combines both hook and screw fastening for safety *For more details, please refer to the PDF document or feel free to contact us.

  • Other fittings
  • Disaster prevention fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Metal fittings

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.