Manufacturing Services Product List and Ranking from 43 Manufacturers, Suppliers and Companies

Last Updated： Aggregation Period:Sep 03, 2025～Sep 30, 2025
This ranking is based on the number of page views on our site.

Manufacturing Services Manufacturer, Suppliers and Company Rankings

Last Updated： Aggregation Period:Sep 03, 2025～Sep 30, 2025
This ranking is based on the number of page views on our site.

  1. 三英 Chiba//Building materials, supplies and fixtures manufacturers
  2. タカオ Tokyo//Building materials, supplies and fixtures manufacturers
  3. 中村製作所 Chiba//Architectural design office
  4. 4 チリウヒーター Aichi//Housing manufacturers and construction companies
  5. 5 サカヱ Tokyo//others
Go to Company Ranking

Manufacturing Services Product ranking

Last Updated： Aggregation Period:Sep 03, 2025～Sep 30, 2025
This ranking is based on the number of page views on our site.

  1. San-ei Co., Ltd. Park Equipment and Landscape Facility Catalog [Digest Edition] 三英
  2. Playnetic: Playground Equipment with Power Generation Function (Originating from Europe) タカオ
  3. Water drinking (compliant with Ministry of Land, Infrastructure, Transport and Tourism guidelines) サカヱ
  4. Residential insulation material "Aqua Foam" 日本アクア
  5. 4 Solar Water Heater Product Catalog 日本エコル 本社

Manufacturing Services Product List

841～855 item / All 898 items

Displayed results
Partial repair of the parking lot with 'Dimple Flat Artisan Gray (with construction set)'

Partial repair of the parking lot with 'Dimple Flat Artisan Gray (with construction set)'

Repairs for dents and uneven surfaces in asphalt and similar materials will be completed in one hour!

Mixing two materials together and pouring them into holes and uneven areas to level the surface completes the partial repair. The time from mixing the materials to hardening is about 1 hour! You can repair during the time before opening or during lunch breaks, and by the time you start operations, it will have hardened to a level that vehicles can pass. Hekomi Flat Takumi Gray is suitable for repairing concrete parking lots, ramps, etc. 【Instructions】 1. Clean the area to be repaired (sweep out sand and debris as much as possible). 2. Add the liquid agent to the bag containing the aggregate and mix them together. (Twisting the opening of the bag while mixing increases its sealability.) 3. Pour the mixed material into the area that needs repair. 4. Use a trowel or similar tool to level it out. (It becomes easier to smooth after it has set for a little while.) 5. Wait for about 40 minutes until it hardens, and it's complete. *To keep the repair area clean and prevent splatter marks, it is recommended to surround the area with masking tape before performing the repair for a neat finish.

  • Reinforcement and repair materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Foam Styrofoam Densifier Haimelter RE-E1000

Foam Styrofoam Densifier Haimelter RE-E1000

Ideal for replacing burner-type volume reduction machines! Environmentally friendly electric heating type that is easy on expenses! Can reduce 100 kg of expanded polystyrene in one hour!

The RE-E1000 incorporates all necessary systems into a compact body with a total height of approximately 2200mm, demonstrating a processing capacity of 100kg per hour. We offer two models in our lineup: ● Standard (Roller Conveyor) R Type / ● Belt Conveyor B Type. Compared to kerosene burner type volume reduction machines, it achieves approximately 80% reduction in running costs and CO2 emissions (compared to our hot air type). Additionally, for safe and comfortable operation, it features an electromagnetic lock on the inspection door, an automatic stop device, a trouble display function, and a deodorization system. The RE-E1000 contributes to a safe and low-cost recycling business.

  • Other resource recycling
  • Waste treatment facility
  • Other commercial buildings and service facilities

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Printed Circuit Board Manufacturing Service "Quality Improvement"

Printed Circuit Board Manufacturing Service "Quality Improvement"

We have absolute confidence in our quality! By utilizing our in-house integrated production know-how, we prevent troubles before they occur and provide reliable products.

At K2 Corporation, we have all manufacturing lines in-house, and our experienced staff are well-versed in each piece of equipment. By conducting daily inspections and maintenance on each device, we prevent issues before they arise. Additionally, our thorough intermediate inspections, such as pattern checks using AOI (Automated Optical Inspection) and continuity tests with flying checkers, allow us to detect problems early in the process, preventing the outflow of defective products and delays in delivery. We obtained ISO 9001 in August 2005 and are committed to quality improvement based on this standard, enabling us to provide products that our customers can trust. For more details, please contact us or download our catalog.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Case of Styrofoam Reduction Machine] Recycling EPS in Singapore

[Case of Styrofoam Reduction Machine] Recycling EPS in Singapore

Introducing a polystyrene reduction machine to the seafood market in Singapore. We are recycling waste polystyrene that was previously incinerated.

Case Study 2: Styrofoam Reduction Machine RE-E502X Industry: Market Relations Application: Styrofoam Reduction in Singapore Customer's Challenges: In Singapore, which has very limited land and a small agricultural area, a large portion of food products is reliant on imports, leading to significant waste generated from Styrofoam associated with logistics. However, unlike in Japan, the discarded Styrofoam is not recycled but is instead transported and incinerated along with other waste. The bulky nature of Styrofoam results in inefficiencies in storage and transportation, causing various issues. *For more details, please refer to the PDF document or feel free to contact us.*

  • Other resource recycling

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Expanded Polystyrene Volume Reduction Machine Ingot Granulation Device 'RE-E Series'

Expanded Polystyrene Volume Reduction Machine Ingot Granulation Device 'RE-E Series'

The tasks of "drawing out, cooling, and palletizing" ingots are unnecessary. By automating this series of tasks, further labor reduction and ease of work are achieved.

The polystyrene densification machine's ingot granulation device eliminates the need for labor-intensive tasks such as "drawing out ingots," "cooling," and "pallet stacking" during the polystyrene densification process. By automating this series of tasks, we have achieved further labor reduction and ease of work. We offer two models with processing capacities of 100 and 150 kg per hour. 【Features】 ■ Automatic granulation of ingots Ingot, shaped into thin plates for easy cooling and solidification, is granulated into block shapes (20mm square) through the up-and-down movement of pressing and cutting blades. ■ Block-shaped ingots stored in bulk bags The granulated block-shaped ingots are stored in bulk bags via air transport. Workers do not need to draw ingots from the densification machine or stack them on pallets. ■ Increased productivity in densification work Since the workload after raw material input is significantly reduced, operators can focus on producing high-quality recycled materials by concentrating on raw material input and the removal of foreign substances. *For more details, please refer to the PDF document or feel free to contact us.

  • Other resource recycling

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Case of Styrofoam Reduction Machine] Improved work efficiency by upgrading from kerosene type.

[Case of Styrofoam Reduction Machine] Improved work efficiency by upgrading from kerosene type.

Improvement of work efficiency and reduction of worker burden through the transition from kerosene to electric heating.

Case Study 3: Polystyrene Reduction Machine RE-E1000 ■Industry: Waste Management ■Application: Volume reduction of polystyrene (fish boxes and cushioning materials) 【Customer's Challenges】 The company had been using an oil-based reduction machine introduced over 20 years ago, but due to aging, it had experienced an increase in breakdowns and difficulties in securing parts, prompting them to consider updating their equipment. Previously, the company had to wait for the ingots in the receiving box to cool down before removing them and stacking them on pallets, which was very time-consuming and labor-intensive. *For more details, please refer to the PDF document or feel free to contact us.*

  • Other resource recycling

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Four A <Square Type>

Four A <Square Type>

The calm appearance unique to a 3-inch pitched roof! Enhanced durability for long-lasting performance.

We would like to introduce the square type "Yahata" that we handle. With a calm appearance unique to a 3-degree sloped roof, it features an aluminum roof and synthetic wood columns, enhancing durability for a long lifespan. We offer two types: "Composite Wood Columns" and "Stone-Like Columns." Please feel free to consult us when you need assistance. 【Lineup】 ■Composite Wood Columns (□185) ・Aluminum Roof Composite Wood Square Column ・Colonial Roof Composite Wood Square Column ■Stone-Like Columns (White Granite, Bush-Hammered Finish φ300) ・Aluminum Roof ・Colonial Roofing *For more details, please refer to the PDF document or feel free to contact us.

  • Other park materials
  • Others/Roofing materials (shingles, cement, steel sheets, aluminum)

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Assembly Stand Bench

Assembly Stand Bench

We can also accommodate roofs, fences, steps, and more along with the stand!

The "Assembly Stand Bench" is a sturdy and highly convenient stand that is easy to assemble. It combines the robustness of permanent PC and RC structure stands with the convenience of a lightweight assembly stand that can be relocated, expanded, and disassembled. This versatile stand bench can meet various requirements such as budget and space. 【Common Specifications】 ■ Steel with zinc plating ■ Polyester powder coating finish ■ Some parts with urethane coating finish ■ Bench material: 270F (Foamed PVC) ■ Load capacity: 360kg/m2 *For more details, please refer to the PDF document or feel free to contact us.

  • Tables and benches (chairs)
  • Sports related facilities

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
D-38 Four-Seat Swing Medium Size

D-38 Four-Seat Swing Medium Size

The dimensions are a total length of 6.42m × total width of 2.2m × total height of 2.24m, with a chair length of 1.69m!

We would like to introduce our product, the "D-38 Four-Seat Swing Medium." The dimensions are a total length of 6.42m × total width of 2.2m × total height of 2.24m, with a seat length of 1.69m and lead-free paint. Please feel free to consult us when you need assistance. 【Specifications】 ■ Main material: 76φ × 48φ ■ Dimensions: Total length 6.42m × total width 2.2m × total height 2.24m, seat length 1.69m ■ Lead-free paint *For more details, please feel free to contact us.

  • Playground equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Card manufacturing service

Card manufacturing service

It is possible to handle approximately 100 overlapping reads and small IC tags measuring 5mm square, which are difficult with RFID!

At Wada Printing Co., Ltd., we specialize in the design, prototyping, and mass production of RFID in the HF band. Due to the use of reactive hot melt, our products are firmer compared to typical tickets, resulting in a texture similar to trading cards. Additionally, for playing cards, we have the equipment to complete a set of all 54 types in sheet form. 【Product Lineup】 ■RFID (IC cards and tags) ■Trading cards and playing cards *For more details, please refer to the related links or feel free to contact us.

  • RFID/IC tags

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Best Products of November: Gate Pillar

Best Products of November: Gate Pillar

We received an inquiry from a design office asking us to create a "functional gatepost"!

We would like to introduce the best product of November made by Excel Corporation. The best product of November is the "Gate Post." This gate post functions as a residential mailbox and delivery box, featuring lighting on the top and a space for an intercom above the front mail slot, designed to pursue both functionality and style. During production, we differentiated between pitch welding and full welding based on the purpose and suitability of each part, ensuring that the area for the top lighting installation is finished in a way that prevents light from leaking through the welding gaps by using full welding. We also have photos of other product examples on our company website, so please take a look if you are interested. 【Features】 ■ Finished with a black matte paint for a very heavy and stylish atmosphere ■ Strong holding power of the magnetic catch on the front door *For more details, please refer to the PDF document or feel free to contact us.

  • Fences and gateposts

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Manufacturing services

Manufacturing services

Possesses high-density mounting machines such as inserters, mount machines, and appearance inspection machines.

Our company implements advanced electronic components with high speed and precision. We possess high-density mounting machines such as inserters, mounters, and appearance inspection machines. We also accommodate functional inspections. Additionally, we handle network camera production management systems. Please contact us if you require our services. 【Equipment and Processes】 ■ Mounting Line ■ Self-Insertion Line ■ Manual Insertion Line ■ Appearance Inspection Machine ■ Functional Inspection ■ Potting *For more details, please download the PDF or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Flexible sensor

Flexible sensor

Capacitance type with multiple capacitors! Measuring displacement from the change in capacitance of the capacitors.

The "Flexible Sensor" is a strong and flexible sensor that can measure the displacement of objects. It maintains high stability and reliability over a long period without drift. It has excellent flexibility made from soft silicone elastomer. This product has high linearity in angle measurement and can output angular displacement information in real-time. 【Features】 ■ Measures the displacement of objects with a strong and flexible sensor ■ Capacitive sensor with multiple capacitors ■ Measures displacement from changes in capacitor capacitance ■ Easy-to-use I2C interface ■ Excellent water resistance, weather resistance, durability, and noise resistance *For more details, please download the PDF or feel free to contact us.

  • Parts and Materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Shinkyo Chemical Industry Co., Ltd. Product Information

Shinkyo Chemical Industry Co., Ltd. Product Information

A lineup of trays for robots, two-dimensional NC processed products, and three-dimensional NC processed products is also available.

We would like to introduce the products we handle, including automotive components, fish boxes, vegetable boxes, and building materials. Expanded polystyrene has moderate cushioning properties and strength, making it suitable as cushioning and packaging material. Additionally, home appliance components can accommodate complex shapes, and are used as structural components in air conditioners, refrigerators, and more. 【Products We Handle (Partial)】 ■ Cushioning Materials ■ Home Appliance Components ■ Automotive Components ■ Fish Boxes, Vegetable Boxes ■ Building Materials *For more details, please refer to the related links or feel free to contact us.

  • Packaging materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.