Joint×中日技研工業 - List of Manufacturers, Suppliers, Companies and Products

Joint Product List

1~6 item / All 6 items

Displayed results

Spherical Rubber Flexible Joint "F-FLEX"

Vibration absorption, absorption of piping expansion and displacement, excellent vibration isolation effect and pressure resistance.

"F-FLEX" is a flexible joint made of spherical rubber, handled by Chūnichi Giken Kōgyō Co., Ltd. It has excellent vibration absorption, accommodates expansion and displacement of piping, and offers superior vibration isolation and pressure resistance. 【Usage Range】 ■ Maximum operating pressure: 1.0 MPa (however, this may vary depending on usage conditions.) ■ Maximum operating temperature: 70°C (however, this may vary depending on usage conditions.) ■ If the operating pressure is negative (vacuum), please use the embedded rubber type. ■ If the fluid is gas, the maximum operating pressure will change, so please inquire. ■ For fluids such as wastewater and powders that tend to accumulate in the mountain area, the embedded rubber type is recommended. (1) Cannot be used for hot water piping. (Please use D-FLEX.) (2) Cannot be used for pool water. (For circulation pumps around pool water, please use D-FLEX.) (3) Cannot be used in areas where frequent pressure fluctuations occur, such as the delivery side of pressurized or booster water pumps. (4) Generally, cannot be used with fluids or installation locations that may degrade the elasticity of the rubber. *For more details, please refer to the PDF document or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

2 Mountain Spherical Rubber Flexible Joint 'FW-FLEX'

Excellent vibration-damping effect and pressure resistance, two-mountain spherical type.

"FW-FLEX" is a flexible joint made of rubber with a two-mountain spherical design, handled by Chūnichi Giken Kōgyō Co., Ltd. It offers excellent vibration-damping effects and pressure resistance. 【Usage Range】 ■ Maximum operating pressure: 1.0 MPa (However, this may vary depending on usage conditions.) ■ Maximum operating temperature: 70℃ (However, this may vary depending on usage conditions.) ■ If the operating pressure is negative (vacuum), please use the embedded rubber type. ■ If the fluid is gas, the maximum operating pressure will change, so please inquire. (1) It cannot be used for hot water piping. (Please use D-FLEX.) (2) It cannot be used for pool water. (For circulation pumps around pool water, please use D-FLEX.) (3) It cannot be used in areas where pressure fluctuations occur frequently, such as the delivery side of pressurized or booster water pumps. (4) In general, it cannot be used with fluids or installation locations that may degrade the elasticity of the rubber. *For more details, please refer to the PDF materials or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Spherical Flexible Joint "D-FLEX"

The liquid contact part is made of fluororesin, which has excellent heat resistance and chemical resistance, while also possessing properties such as water repellency, oil repellency, and non-stickiness.

"D-FLEX" is a spherical flexible joint coated with synthetic rubber on the outer surface of fluororesin, handled by Chūnichi Giken Kōgyō Co., Ltd. Since the liquid-contacting part is made of fluororesin, it has excellent heat resistance and chemical resistance, while also possessing properties such as water repellency, oil repellency, and non-stickiness. 【Usage Range】 ■ Maximum operating pressure: 1.0 MPa (However, this may vary depending on usage conditions.) ■ Maximum operating temperature: 100°C (However, this may vary depending on usage conditions.) ■ If the fluid is a gas, the maximum operating pressure may change, so please inquire. (1) It cannot be used in locations such as the delivery side of pressurized or booster water pumps where pressure fluctuations occur frequently. (2) Due to the material properties, there may be a decrease in sealing performance. In this case, please perform additional tightening or use a gasket. *For more details, please refer to the PDF document or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Cylindrical Flexible Joint "T-FLEX S"

The liquid contact part is made of fluororesin, which has excellent heat resistance and chemical resistance, while also possessing properties such as water repellency, oil repellency, and non-stickiness.

The "T-FLEX S" is a cylindrical flexible joint coated with synthetic rubber on the outer surface of fluororesin, handled by Chūnichi Giken Kōgyō Co., Ltd. Since the inner surface is straight, there is no liquid pooling. 【Usage Range】 ■ Maximum Operating Pressure: 1.0 MPa (However, this may vary depending on usage conditions.) ■ Maximum Operating Temperature: 100°C (However, this may vary depending on usage conditions.) ■ If the fluid is a gas, the maximum operating pressure will change, so please inquire. *If used beyond the maximum operating pressure (1.0 MPa), we will conduct a separate structural review, so please inquire. (1) It cannot be used in areas such as the delivery side of pressurized water pumps where pressure fluctuations occur frequently. (2) Due to the material properties, there is a possibility of decreased sealing performance. In this case, please perform additional tightening or use a gasket. *For more details, please refer to the PDF document or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Spherical Flexible Joint "DL-FLEX"

The liquid contact part is made of fluororesin, which has excellent heat resistance and chemical resistance, while also possessing properties such as water repellency, oil repellency, and non-stickiness.

"DL-FLEX" is a spherical flexible joint coated with synthetic rubber on the outer surface of fluororesin, handled by Chūnichi Giken Kōgyō Co., Ltd. Since the liquid-contacting part is made of fluororesin, it excels in heat resistance and chemical resistance, while also possessing properties such as water repellency, oil repellency, and non-stickiness. 【Usage Range】 ■ Maximum operating pressure: 1.0 MPa (however, this may vary depending on usage conditions.) ■ Maximum operating temperature: 100°C (however, this may vary depending on usage conditions.) ■ If the fluid is a gas, the maximum operating pressure will change, so please inquire. (1) It cannot be used in locations such as the delivery side of pressurized or booster water pumps, where pressure fluctuations occur frequently. (2) Due to the characteristics of the material, there is a possibility of reduced sealing performance. In this case, please perform re-tightening or use a gasket. *For more details, please refer to the PDF document or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Cylindrical Flexible Joint "T-FLEX C"

The liquid contact part is made of fluororesin, which has excellent heat resistance and chemical resistance, while also possessing properties such as water repellency, oil repellency, and non-stickiness.

"T-FLEX C" is a cylindrical flexible joint coated with synthetic rubber on the outer surface of fluororesin, handled by Chūnichi Giken Kōgyō Co., Ltd. The inner surface is made of a corrugated hose, allowing it to accommodate large amounts of eccentricity. 【Usage Range】 ■ Maximum operating pressure: 1.0 MPa (However, this may vary depending on usage conditions.) ■ Maximum operating temperature: 100°C (However, this may vary depending on usage conditions.) ■ If the fluid is gas, the maximum operating pressure will change, so please contact us. * If used beyond the maximum operating pressure (1.0 MPa), we will conduct a separate structural review, so please contact us. (1) It cannot be used in locations such as the delivery side of pressurized or booster water pumps, where pressure fluctuations occur frequently. (2) Due to the material properties, there is a possibility of reduced sealing performance. In this case, please perform retightening or use a gasket. * For more details, please refer to the PDF materials or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration