Inhibitor - メーカー・企業128社の製品一覧とランキング

更新日： 集計期間:Nov 19, 2025～Dec 16, 2025
※当サイトの各ページの閲覧回数を元に算出したランキングです。

Inhibitorのメーカー・企業ランキング

更新日： 集計期間:Nov 19, 2025～Dec 16, 2025
※当サイトの各ページの閲覧回数を元に算出したランキングです。

  1. People, Dreams & Technologies Group Co., Ltd. Tokyo//Construction Consultant
  2. NIPPON PMAC Co., Ltd. Tokyo//Building materials, supplies and fixtures manufacturers
  3. 環境技術研究所 Tokyo//Building Management
  4. 4 酒井重工業 本社 Tokyo//Other construction industries
  5. 5 null/null
企業ランキングへ

Inhibitorの製品ランキング

更新日： 集計期間:Nov 19, 2025～Dec 16, 2025
※当サイトの各ページの閲覧回数を元に算出したランキングです。

  1. Drain slime prevention agent "AG Clean" NIPPON PMAC Co., Ltd.
  2. Asphalt mixture adhesion prevention agent "Neppalan Series" 酒井重工業 本社
  3. AQUA cleanS 環境技術研究所
  4. 4 Dust Prevention Agent "Bio Green Shield" [NETIS] People, Dreams & Technologies Group Co., Ltd.
  5. 5 Plant-derived biodegradable dust suppressant "Bio Green Shield" People, Dreams & Technologies Group Co., Ltd.

Inhibitorの製品一覧

46～60 件を表示 ／ 全 222 件

表示件数
Slip and deterioration prevention agent "B-Lube Plus"

Slip and deterioration prevention agent "B-Lube Plus"

This is a slip and deterioration prevention agent for drive belts that can be used on a wide range of materials such as leather, rubber, and canvas.

"Are you facing any of these issues?" - The belt hardens quickly, cracks, and needs frequent replacement. - The belt slips easily, resulting in poor efficiency. - Other products tend to attract dust and dirt, becoming sticky. - Slip prevention agents do not spread evenly across the entire belt. "B-Lube Plus" penetrates deeply, keeping the belt flexible and preventing cracks for a long time. It significantly increases the friction coefficient of the belt, maximizing efficiency. It has high permeability and does not make only the surface sticky. Being a solvent-diluted type, it has low viscosity immediately after spraying, ensuring it reaches all the details of the belt. [Features] - Slip prevention - Workability - Water resistance - Safety *For more details, please download the PDF or feel free to contact us.

  • Safety and consumables

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Dealing with the foul odor of the paint sludge pond and sludge disposal.

Dealing with the foul odor of the paint sludge pond and sludge disposal.

Cleaning costs can be significantly reduced! The smell of decay is almost eliminated, and the lifespan of the sludge pond circulating water can be extended.

Our company is engaged in the "treatment of the foul odor and sludge from the paint residue pond." We can eliminate the odor from the paint residue pond, reduce the viscosity of the sludge, and achieve volume reduction. We guarantee the prevention of foul odor generation. Additionally, we offer free rental of a poly drum testing machine. Please feel free to contact us when you need assistance. 【Effects】 ■ Prolongs the life of the circulating water in the residue pond ■ Significantly reduces cleaning costs ■ Eliminates the viscosity of the sludge ■ Almost completely removes foul odors ■ Reduces blockages in the line piping *For more details, please refer to the PDF document or feel free to contact us.

  • Turbid water and muddy water treatment machines
  • Water treatment technology and systems

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
[NETIS Registered Product] High-Performance Water-Soluble Asphalt Adhesion Preventive Agent

[NETIS Registered Product] High-Performance Water-Soluble Asphalt Adhesion Preventive Agent

As of January 2019, the NETIS information type code has been changed from "-A" to "-VE"!

"Super Earth Guard T" is a high-performance water-soluble asphalt adhesion prevention agent registered with NETIS. It prevents asphalt adhesion on equipment used for manufacturing asphalt mixtures for road paving, on the beds of dump trucks during transportation, and on rollers and shovels during construction work. As of January 2019, the NETIS information type code has changed from "-A" to "-VE." 【Features】 ■ Since it is not classified as a hazardous material under the Fire Service Act, it can be used without worrying about inventory or handling quantity restrictions. ■ With a biodegradability of 96% in 28 days, it is an eco-mark certified product, reducing environmental impact in case of leakage. ■ Unlike diesel, heavy oil, and oil-based adhesion prevention agents, it does not dissolve asphalt, thus not affecting the quality of the mixture or human health. ■ With a flow point of the concentrate at -30°C, it is less likely to freeze in cold regions, improving work efficiency. ■ It is less likely to foam during application and dilution, enhancing workability. *For more details, please refer to the PDF document or feel free to contact us.

  • Safety and consumables
  • others

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
"Non-overflowing! Non-spilling" Easy-to-use asphalt adhesion prevention agent.

"Non-overflowing! Non-spilling" Easy-to-use asphalt adhesion prevention agent.

No impact on the human body! Improved workability due to reduced foaming during application and dilution!

"Super Earth Guard T" is an asphalt adhesion prevention agent that makes dilution work easier without overflowing or spilling. It prevents asphalt adhesion on manufacturing plant equipment for asphalt mixtures used in road paving, on the beds of dump trucks during transportation, and on rollers and shovels during construction work. Unlike diesel, heavy oil, and oil-based adhesion prevention agents, it does not dissolve asphalt, thus not affecting the quality of the mixture or human health. 【Features】 ■ Since it is not classified as a hazardous material under the Fire Service Act, it can be used without worrying about inventory or handling quantity restrictions. ■ With a biodegradability of 96% in 28 days, it is an eco-mark certified product, reducing environmental impact in case of leakage. ■ The flow point of the concentrate is -30°C, making it less likely to freeze in cold regions and improving work efficiency. ■ As of January 2019, the NETIS information type symbol has been changed from "-A" to "-VE." *For more details, please refer to the PDF materials or feel free to contact us.

  • Safety and consumables
  • others

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
[NETIS Registered Product] High-Performance Water-Soluble Asphalt Adhesion Preventive Agent

[NETIS Registered Product] High-Performance Water-Soluble Asphalt Adhesion Preventive Agent

Preventing asphalt adhesion and protecting aggregate quality: The superiority of "Super Earth Guard T"!

Point 1: NETIS VE Registered Product, Registration Number KT-150116-VE, has earned a maximum score of 0.8 points! This is a high-performance water-soluble asphalt adhesion prevention agent registered with NETIS. It prevents asphalt adhesion on manufacturing plant equipment for asphalt mixtures used in road paving, as well as on dump truck beds during transportation and on rollers and shovels during construction work. Point 2: "Eco Mark Certified Product" that considers the global environment Its biodegradability is top in the industry! It does not pollute soil or water quality. Due to the carefully selected raw materials of the water-soluble type, it does not adversely affect the mixture. Point 3: Improved Workability The flow point of the concentrated solution is -30°C, making it less likely to freeze in cold regions and enabling improved work efficiency. It wets evenly! It has uniform distribution performance. *For more details, please download the PDF below or contact us.*

  • Safety and consumables

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Adhesion Preventive Agent for Asphalt Plants "Plant Guard T"

Adhesion Preventive Agent for Asphalt Plants "Plant Guard T"

Thoroughly pursuing asphalt adhesion prevention for plants! Strongly protecting your important plant.

"Plant Guard T" is an adhesion prevention agent for asphalt plants that ensures the safety of workers and the stability of operations. It has excellent adhesion prevention performance and can be used on various belt conveyors within the plant, providing strong protection for your important plant. Additionally, it reduces the risk of fire from heavy oil and light oil. It also minimizes cleaning work, thereby reducing the risk of accidents. 【Features】 ■ Excellent adhesion prevention Compared to other products, it has a high level of adhesion prevention. Unlike petroleum-based adhesion preventives, it does not dissolve asphalt, preventing quality degradation. ■ Reduces cleaning work Manufacturing in the plant involves risks that can lead to accidents and injuries. High adhesion prevention leads to reduced cleaning, which lowers the risk of accidents. ■ Reduces fire risk Since it is non-flammable, it reduces the risk of fire. The use of heavy oil and light oil not only leads to quality degradation of the mixture but also increases the risk of fire. *For more details, please refer to the PDF document or feel free to contact us.

  • Safety and consumables

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Puncture prevention agent "Dream Seal Combat 12"

Puncture prevention agent "Dream Seal Combat 12"

By simply injecting it into the tires in advance, you can reduce costs and improve work efficiency!

"Dream Seal Combat 12" is a puncture prevention agent for vehicles used in general waste disposal sites, ports, steelworks, tunnels, underground construction sites, roads, construction sites, airports, and more. It achieves an 80-90% reduction in puncture-related costs. It contributes to environmental measures by reducing waste tires. 【Features】 ○ Extends tire life through the synergistic effect of "natural air leak prevention" and "cooling with water-soluble materials." ○ Applicable temperature: -40 to 100℃ ○ Shelf life: 5 years until the tire reaches the end of its life. ○ No rust or corrosion. For more details, please contact us or download the catalog.

  • Safety and consumables

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Adoption results of the composite material factory and concrete recycling factory "Combat 12".

Adoption results of the composite material factory and concrete recycling factory "Combat 12".

Significant extension of tire lifespan and drastic reduction in punctures! We present the results of using our puncture prevention agent.

We would like to introduce the results of using the puncture prevention agent "Dream Seal Combat 12" at the aggregate plant. Before injection, during the 2-year lease period, we experienced 4 to 6 punctures with the L5 super deep groove radial tires, which was a significant issue. Additionally, we had to replace the tires due to wear after about 1 year and 4 months, causing us considerable concern. After injection, with the exception of one side cut, all punctures caused by rebar penetration were prevented, and we were able to avoid tire replacements due to wear during the lease period. This resulted in a reduction of several million yen in tire expenses and downtime due to punctures. 【Results of Adoption at the Aggregate Plant】 <Before Injection: After 1 year and 3 months> ■ Remaining Tread: 29mm ■ Punctures: 4 to 6 occurrences <After Injection: After 1 year and 4 months> ■ Remaining Tread: 40.5mm ■ Punctures: Only 1 side cut on the front tire *For more details, please refer to the PDF document or feel free to contact us.

  • Safety and consumables

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Puncture prevention agent "Dream Seal Commercial Use DX/ST"

Puncture prevention agent "Dream Seal Commercial Use DX/ST"

Reduce punk-related expenses by 80-90%! Essential for the agriculture, livestock, and construction industries.

The "Dream Seal Commercial DX/ST" is pre-injected into tires and tubes to provide puncture prevention effects. With an air filling compressor, anyone can easily inject it. It fills the gap between the tire and wheel, preventing air leaks. Additionally, it uses an expensive rust inhibitor with a pH of 8.5 to 9.1, which does not cause rust or corrosion and has no adverse effects on tire rubber. 【Features】 ■ Effective for up to 5 years until the tire's lifespan is exhausted throughout the year ■ Does not cause rust or corrosion and has no adverse effects on tire rubber ■ Ride comfort is similar to that of air tires, posing no physical harm to vehicles or operators ■ Vehicle registration number can also be obtained ■ Prevents air leaks caused by rust on wheels and unexplained air leaks from tires ■ Reduces CO2 emissions and extends tire life through the synergistic effect of preventing natural air leaks and cooling effects *For more details, please refer to the PDF document or feel free to contact us.

  • Safety and consumables

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Puncture and natural air leak prevention agent "Dream Seal Combat 25"

Puncture and natural air leak prevention agent "Dream Seal Combat 25"

Introducing a puncture and natural air leak prevention agent at about one-third the introduction cost of urethane-filled tires!

"Dream Seal Combat 25" is a puncture and natural air leak prevention agent that can reduce puncture-related costs by 80-90% simply by injecting it into the tires in advance. It maintains its effectiveness for 5 years until the tire's lifespan is exhausted throughout the year. It does not cause rust or corrosion and has no adverse effects on tire rubber. It can be used in vehicles at general industrial waste disposal sites, ports, steelworks, tunnels, underground construction sites, roads, construction sites, airports, etc. 【Features】 ■ Maintains effectiveness for 5 years until the tire's lifespan is exhausted throughout the year ■ Does not cause rust or corrosion and has no adverse effects on tire rubber ■ Ride comfort is similar to that of air-filled tires, posing no health risks to vehicles or operators ■ Vehicle numbers can also be obtained ■ Reduces CO2 emissions and extends tire lifespan through the synergistic effect of preventing natural air leaks and cooling *For more details, please refer to the PDF document or feel free to contact us.

  • Safety and consumables

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Dust dispersion prevention agent "Dust Shut Series"

Dust dispersion prevention agent "Dust Shut Series"

Prevent dust generation! Ideal for construction sites, waste disposal sites, and land development areas!

"Dust Shut" is a dust dispersion prevention agent that can be used for various airborne powders. At construction sites, waste disposal sites, and land reclamation areas, dust is generated by the wind, negatively impacting the surrounding environment. Dust Shut is a dust dispersion prevention agent that addresses this issue. 【Features】 ■ Simplified usability ⇒ Can be applied using household watering cans or sprayers without the need for special equipment ■ Prevention of dust ■ Can be used for various airborne powders by diluting with water and changing the concentration ■ An environmentally friendly product that has no adverse effects on human health or the environment *For more details, please contact us or download the catalog.

  • Subsidiary materials
  • Paving of sidewalks, roads, parking lots and stadiums

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Significantly reduces painting defects and dust particles! "Static Electricity Salary C"

Significantly reduces painting defects and dust particles! "Static Electricity Salary C"

Concentrated antistatic agent for pre-treatment of high-grade resin parts for painting.

Are you struggling with poor paint adhesion on resin parts due to dust and debris? As electrical insulators, resin parts are prone to the attachment of dust and debris caused by static electricity. Even wiping or blowing air may not remove them; instead, they can become more stuck. "Static Sarari C" solves this problem. By diluting "Static Sarari C" with your IPA (isopropyl alcohol) at a ratio of 6:1, you create a static prevention agent specifically for pre-treatment before painting, which maintains its static prevention effect throughout the usual wiping process until painting. This significantly reduces the amount of dust and debris.

  • Medicines

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Plant-derived biodegradable dust suppressant "Bio Green Shield"

Plant-derived biodegradable dust suppressant "Bio Green Shield"

Contains no harmful substances such as heavy metals, and naturally returns to its original state after use! A dust suppressant that can be diluted and sprayed.

The dust control agent "Bio Green Shield" creates a flexible and highly elastic film by diluting and spraying it onto the soil, preventing and suppressing flying sand and dust. The dust suppression period can be adjusted according to the amount sprayed, and after use, it naturally returns to the original soil, allowing for dust control measures tailored to the necessary duration at construction sites and development areas. Additionally, the colored agent dyes the sprayed areas green, clearly indicating the application range. There is no loss of labor or chemicals due to overlapping applications. <Features> ■ Neutral pH, free from heavy metals such as lead and mercury ■ Biodegradable, returning to the original soil over time ■ Maintains soil permeability after spraying, not hindering plant growth ■ Can be sprayed without special equipment or techniques ■ Takes effect immediately after drying *Materials introducing the changes over time after application and product details can be viewed via "PDF Download." [This product is provided by our group company, Chodai Co., Ltd.]

  • s1.jpg
  • s2.jpg
  • s3.jpg
  • Slope protection material

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Dust Prevention Agent "Bio Green Shield" [NETIS]

Dust Prevention Agent "Bio Green Shield" [NETIS]

Just dilute and spray; it returns to its original state after use due to biodegradation. It is effective at construction sites and land development areas! A plant-based, safe, and secure biodegradable dust control agent.

"Bio Green Shield" is a dust control agent derived from plants and designed with environmental considerations in mind. Simply dilute and spray. After use, it returns to its original state through biodegradation. It maintains soil permeability after application and does not hinder plant growth. Using a spray pump, apply the adjusted dilution at a rate of 1.5 to 2.5 liters per square meter to evenly prevent dust dispersion at construction sites and development areas. 【Features】 ■ Safe and secure because it is made from plant-derived main ingredients ■ Effective at construction sites, development areas, and idle land ■ Long-lasting effects with easy application ■ Biodegradable into CO2 and H2O *For those interested in a trial, we offer free samples. Please feel free to contact us. For detailed specifications, please download the PDF. 【This product is provided by our group company, Chodai Co., Ltd.】

  • Safety and consumables

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Prevent secondary disasters after landslides! Early slope greening method "PoliSoil Greening System."

Prevent secondary disasters after landslides! Early slope greening method "PoliSoil Greening System."

<NETIS Registration> Significant effects on "erosion prevention" and "turbid water generation prevention" during the recovery work period after landslides! Early greening measures for landslide sites.

"PoliSoil Greening Works" is a slope greening method that firmly coats earth and sand slopes with an acrylic resin, providing rapid erosion prevention, guaranteed full greening, and high cost-effectiveness. *NETIS Registration: KT-210082-A As an early greening countermeasure after landslide disasters, it is effective in preventing erosion and muddy water generation during the restoration work period. << Examples of Adoption at Landslide Disaster Sites >> ■ Order: Mie Prefecture, October 2020 ■ Target: Emergency work at a hillside collapse site due to Typhoon No. 14 This method has a rapid erosion prevention effect, and by spraying it onto the soil, it dries and solidifies naturally within 1 to 3 days, making it resistant to being washed away even in heavy rain with hourly rainfall of several tens of millimeters. Moreover, the effective duration of its effect varies depending on natural conditions and soil types, but it is generally effective for about 6 months to 1 year, allowing for reliable greening even during unsuitable periods for vegetation work. 【Method Features】 Rapid erosion prevention / Guaranteed full greening / High cost-effectiveness *For more details, please refer to the PDF materials or feel free to contact us.

  • Civil Engineering Method

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.