16～30 item / All 32 items
Impact idler used for flat transport.
This is a roller of the flat carrier idler (JFC type) made into an impact type. The impact rubber with a groove shape reduces the impact of falling materials from the hopper or chute by deforming, thereby alleviating damage to the belt and idler.
Carrier idler that improves belt wandering and misalignment through the automatic centering function of tapered rollers.
This is an automatic centering carrier idler with a tapered design based on the JAC type side roller. Due to the larger diameter on the center side of the belt and the smaller diameter on the end side, the difference in surface peripheral speed of the roller during belt contact causes a tracking adjustment. The frame rotates towards the side where the belt is offset, enhancing functionality. It can be used without the need for directional indication and is compatible with both forward and reverse operation conveyors.
Carrier idler that improves belt wandering and misalignment through the automatic centering function of tapered rollers.
Similar to the JAC-T type, this is a tapered automatic centering carrier idler with side rollers. The principle of the zigzag adjustment function is the same; however, as a structural difference, a pivot axis is placed at the bottom of each roller support on the left and right, eliminating the pivot frame to improve pivot sensitivity. This product can also be used in conveyors for both forward and reverse operation.
A stand-tilting carrier idler that helps reduce "work time" and "risk rate" during roller replacement.
It is an idler that can tilt the stand in the direction of the belt's movement. It helps to reduce "work time" and "risk rate" during roller replacement.
Standard return idler with conventional type return bracket specifications.
It is an idler that supports the belt on the return side of the belt conveyor.
Conventional type bracket specification for ore drop prevention return idler.
Similar to the one with a sleeve, this return idler is specialized in reducing the drop of materials adhering to the belt (falling ore) by placing multiple rubber rings on the surface of the iron roller.
Conventional type bracket specification adhesion countermeasure return idler
The roller surface, which has a symmetrical spiral shape, has the function of scraping off the "adhesion" of transported items that cause the belt to wander or become misaligned while rotating.
Two-chambered serpentine return idler for countermeasures.
It is a two-slot return idler. Unlike a standard return idler, it uses two rollers and has a trough angle, providing it with the ability to correct wandering.
Return idler equipped with an automatic centering function ideal for adjusting belt waviness and misalignment.
When the belt comes into contact with the guide roller positioned in front of the pivot axis connecting the upper and lower double-structured frame, the frame pivots within a certain angle range. The resultant force generated at this time, combined with the function that returns the belt to the center of the conveyor, allows for adjustment of wandering and misalignment with minimal force applied, reducing the risk of belt damage.
Return idler that improves belt wandering and misalignment through the automatic centering function of tapered rollers.
This is an automatic centering idler on the return side that uses tapered rollers. Due to the larger diameter in the center of the belt and the smaller diameter at the ends, the difference in surface speed of the rollers during belt contact activates the tracking and alignment adjustment function. The frame pivots toward the side where the belt is misaligned, promoting the adjustment function.
Return idler that corrects belt wandering and misalignment using belt tension and friction.
This is an idler that corrects the wandering of the return side belt using belt tension and frictional force. Since the roller contacts the back surface of the belt, there is no adhesion of transported items to the roller.
Return idler that corrects belt wandering and misalignment using belt tension and friction.
This is an idler that corrects the wandering and misalignment of the return side belt using belt tension and frictional force. It features a mechanism where the corrective force increases in proportion to the symptoms. Since it contacts the back side of the belt conveying surface, there is no adhesion of transported items to the roller.
Various guide idlers that suppress wavering and misalignment by holding down the belt's ear section.
These are various guide idlers that hold the belt ear section. They have the effect of suppressing symptoms when belt wandering or misalignment occurs.
Guide idler that powerfully adjusts meandering with thrust from three drum-shaped guide rollers.
This is a guide idler that strongly corrects the belt's wandering and skewing by arranging three drum-shaped guide rollers and tilting them in the direction of the belt's movement to generate thrust.
A carrier idler connected by joint links for effective snake prevention.
This is a carrier idler connected by joint links for each roller. Its purpose is similar to that of a standard carrier idler, but it has the function of deforming in response to uneven loads during transport, thereby preventing spillage and belt misalignment.
