Holder×篠原電機 - List of Manufacturers, Suppliers, Companies and Products

Holder Product List

1～11 item / All 11 items

Displayed results
DH holder (DIN rail compatible noise filter mounting bracket)

DH holder (DIN rail compatible noise filter mounting bracket)

Just tighten one fixing screw! Noise filter installation auxiliary bracket.

The "DH Holder (DIN Rail Compatible Noise Filter Mounting Base)" is a product manufactured by Shinohara Electric that can be mounted on a DIN rail and used as an auxiliary mounting bracket for noise filters. By simply tightening one fixing screw, it can be secured at any position on the DIN rail, eliminating the need for direct attachment to the back panel. The mounting screws are flat-head screws, ensuring a flat mounting surface. To facilitate easy installation of noise filters, it is pre-tapped. Additionally, it can also accommodate Shinohara's push button mounting bases (PBK series). 【Features】 ■ Can be secured at any position on the DIN rail ■ No need for direct attachment to the back panel ■ Uses flat-head screws for mounting ■ Pre-tapped for easy installation ■ Compatible with Shinohara's push button mounting bases (PBK series) *For more details, please refer to the PDF document or feel free to contact us.

  • Structural Materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Insulating support material P.P. holder (edge wire support material) Type G

Insulating support material P.P. holder (edge wire support material) Type G

Excellent insulation properties and lightweight! It supports and fully protects wires of all sizes.

【Features】 1. By tightening with a cable tie, wires can be easily and securely held. 2. We offer three types with different heights, allowing you to use them according to your needs. 3. Excellent insulation properties and lightweight. *For more details, please refer to the PDF document or feel free to contact us.

  • Piping and electrical wiring materials
  • Wiring devices
  • Work tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Insulating Support Material Bar Holder X (Copper Strip Insulating Support Base)

Insulating Support Material Bar Holder X (Copper Strip Insulating Support Base)

Made of polypropylene and lightweight! Please use it for supporting low-pressure copper bands.

The "Bar Holder X (Insulated Support for Low-Pressure Copper Strips)" is a product that supports copper strips without drilling holes by sandwiching them from above and below. It features a groove surface of 20mm width that intersects with a groove surface of 11mm width at a right angle, allowing for two different usage methods. Additionally, it can support copper strips with a thickness ranging from 10mm to 20mm, and it is also possible to install two 6mm strips. The width of the copper strip that can be supported ranges from 50mm to 125mm, and for supporting strips wider than 75mm, insulated bolts are available. 【Features】 - Can be used without drilling holes for supporting copper strips - Supports by sandwiching from above and below - Allows for two different usage methods - Can support copper strips with a thickness of 10mm to 20mm - Can support copper strips with a width of 50mm to 125mm - Insulated bolts are included for supporting strips wider than 75mm *For more details, please refer to the PDF document or feel free to contact us.

  • Piping and electrical wiring materials
  • Wiring devices
  • Work tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
ABC Parts Angle Holder

ABC Parts Angle Holder

Easily install terminal blocks, wiring ducts, etc.! You can freely attach parts and equipment.

【Features】 ■ There is no need to drill new holes or tap for additions, modifications, or changes inside distribution boards, etc. ■ Taps (AH-4, 5, 6) are installed in two directions, allowing for flexible mounting of parts and equipment. ■ It can also be used for wiring and piping in the steel structure of electrical construction. *For more details, please refer to the PDF document or feel free to contact us.

  • Structural Materials
  • Wiring devices
  • Reinforcement and repair materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Drawing holder for board accessories

Drawing holder for board accessories

Flame-retardant type also available! A transparent drawing holder that allows for good visibility of contents and has excellent aesthetics.

The "Drawing Holder" can be used to store drawings and specifications for distribution boards, cubicles, control panels, operation panels, etc., within the panel. It is suitable for storage as it is transparent and allows for easy visibility of the contents, and it also has excellent aesthetics. It is lightweight and safe as there is no risk of breaking, making it easy to handle. Installation is simple as it can be attached with double-sided adhesive tape. Additionally, there are guide holes for screws, allowing for screw fastening as well. 【Features】 ■ Transparent and allows for easy visibility of contents ■ Excellent aesthetics ■ Safe and easy to handle ■ Easy installation with double-sided adhesive tape ■ Screw fastening is also possible *For more details, please refer to the PDF document or feel free to contact us.

  • Subsidiary materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Plate accessory: Hook rod holder and dish

Plate accessory: Hook rod holder and dish

A holder and receptacle for hook rods that can be used for opening and closing operations of circuit breakers!

We also offer a "holder and dish for hook rods" that can be used for the opening and closing operation of electrical circuit breakers. 【Features】 ■ For hook rods used in the opening and closing operation of electrical circuit breakers ■ Environmentally friendly, electro-galvanized, trivalent chromate treated product *For more details, please refer to the PDF document or feel free to contact us.

  • Other store equipment and supplies

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Card holder (adhesive fixed type with screw fastening)

Card holder (adhesive fixed type with screw fastening)

Eliminate the steps of drilling holes and tapping! Adhesive fixed and screw-mounted card holder.

The "Card Holder (Adhesive Fixed Type with Screw Fixing)" has a strong double-sided adhesive tape on the back, providing very strong adhesion and eliminating the need for drilling holes and tapping. It does not corrode the adhesive surface. It is resistant to temperature and humidity, adapts well to slightly rough surfaces, and can also be used with screws. 【Features】 ■ Strong double-sided adhesive tape on the back provides very strong adhesion ■ Eliminates the need for drilling holes and tapping ■ Does not corrode the adhesive surface ■ Resistant to temperature and humidity, adapts well to slightly rough surfaces, and can also be used with screws *For more details, please refer to the PDF document or feel free to contact us.

  • Other store equipment and supplies

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Card Holder (Continuous Type) CH-D

Card Holder (Continuous Type) CH-D

Significantly reduce labor for attachment work with a body-type card holder that can be freely cut along the welded parts!

The "Card Holder (Continuous Type) CH-D" is an integrated design, allowing for significant labor savings in the application process compared to traditional individual piece card holders. It can be freely cut along the welded sections for use. 【Features】 ■ Integrated design enables significant labor savings in the application process ■ Can be freely cut along the welded sections ■ Holds 40 pieces of card per sheet ■ Compatible card size: 19mm x 39mm *For more details, please refer to the PDF document or feel free to contact us.

  • Other store equipment and supplies

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
DH holder (socket mount type) one-touch type

DH holder (socket mount type) one-touch type

When installing a socket on a DIN rail

【Features】 Once the outlet is attached to the bracket, it can be mounted onto the DIN rail with a single touch without the need for tools, thus achieving labor-saving efficiency. Additionally, during maintenance, the outlet can be attached and detached without removing it from the bracket. *For more details, please refer to the PDF document or feel free to contact us.*

  • Structural Materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
DIN Rail Mounting Bracket DH Holder for Cartridge Fuse Installation Type

DIN Rail Mounting Bracket DH Holder for Cartridge Fuse Installation Type

By tightening just one fixing screw, it is possible to secure the plug-type fuse connection base.

The "DH Holder Plug Fuse Mounting Type" is a structural material for panels that allows you to secure a plug fuse connection base at any position on a DIN rail by simply tightening one fixing screw. It uses countersunk screws for the mounting screws (with countersunk processing for the screw holes) to create a flat mounting surface. The connection base for the plug fuse is pre-tapped for easy installation. Please use it as a mounting bracket when securing the Fuji Electric plug fuse connection base (model number: AFA60) to our DIN rail. 【Features】 ■ Can be fixed at any position on the DIN rail by simply tightening one fixing screw. ■ Uses countersunk screws for the mounting screws (with countersunk processing for the screw holes) to create a flat mounting surface. ■ Pre-tapped for easy installation of the plug fuse connection base. *For more details, please refer to the PDF document or feel free to contact us.

  • Structural Materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
【Board Accessories】Continuous Card Holder (Integrated Cover, Open/Close Type)

【Board Accessories】Continuous Card Holder (Integrated Cover, Open/Close Type)

Significantly reduce labor for attachment work with a body type! A card holder that can be freely cut along the welded parts.

Multiple card holders can be attached at once to breakers arranged at 25mm intervals. 【Features】 1. Multiple card holders can be attached at once to breakers arranged at 25mm intervals. 2. A V-shaped groove is provided at the ☆ mark position in the right diagram, allowing for easy separation of the required number using a cutter or similar tool. 3. To prevent loss of the cover and improve work efficiency, the cover has been designed as a hinged type that opens and closes. *For more details, please refer to the PDF document or feel free to contact us.

  • Other store equipment and supplies

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Holder

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.