1～15 item / All 46 items
Powerful despite being compact and lightweight. Easy to install even in small spaces! Quick ignition allows you to use it right when you need it!
●Easy to move With a convenient handle. ●Adjustable blowing angle of 17° up and down ●Cord holder Can store and organize cords.
Easily detachable heater in a can-type design
This is an easy-to-use heater with a built-in simple thermostat. The heater is lightweight and can be easily attached to the surface of the heated can with a spring clip, making it a user-friendly product.
Immediate warmth, comfort
●Since it is a PSE-compliant product, you can use it with peace of mind. ●The lamp has a special coating on the surface of the quartz tube to reduce glare. ●Compared to conventional heating lamps, the output of near-infrared rays has been increased by improving the color temperature.
Rubber heater with temperature controller for resin-made pails (cylindrical containers)
This is a rubber heater designed for heating resin pail containers, integrated with a silicone rubber heater and a temperature controller. The heater is covered with insulation material (rubber sponge), making it an efficient product that minimizes heat loss from the heater's surface. The fixing buckle is a one-touch type, allowing for easy installation and removal. Additionally, it is equipped with a temperature fuse as a dry burn prevention feature, which will stop the power supply to the heater in the event of a dry burn.
This is a heater for heating drums, pails, and one-gallon cans (JIS standard) that integrates a silicone rubber heater and a temperature controller.
● This is a heater that lowers the viscosity of solidified materials and high-viscosity liquids in a can by heating them, making extraction easier. It can be used for adhesives, oils, greases, waxes, asphalt, paints, and resin materials. ● It features a digital display electronic temperature controller, allowing for precise control with simple operation. ● It fits directly onto drum cans, pails, and one-gallon cans, resulting in high thermal efficiency. ● The silicone rubber heater and temperature controller are integrated, making it lightweight, and the quick-release fastening mechanism allows for very easy installation. ● It is equipped with an over-temperature prevention feature (temperature fuse).
Electric heater for outdoor use, specifically for feet. Waterproof design, suitable for outdoor use. Heats the feet thoroughly. 360° oscillation.
●Warm your feet thoroughly In outdoor settings such as terrace seating, no matter how many heating devices are installed, there has never been a heater that can safely warm your feet. The recommended heater here is a foot heater that warms your feet thoroughly. Its greatest feature is that it has waterproof functionality, allowing it to be used outdoors. Additionally, the protective mesh part is treated with a special coating that prevents it from becoming hot to the touch. It is an affordable heater specialized for warming your feet, equipped with features like oscillation and an automatic shut-off function in case of tipping over.
Safety Explosion-Proof Certification Passed Side Heater for Drum Cans / Model Number M1370DV-N-EXTM
This is a movable drum heater developed for the insulation and heating of drums containing hazardous materials such as solvents. The built-in self-regulating heater has passed the [ domestic explosion-proof structure type certification ]. The exterior consists of a sturdy metal case with insulation material incorporated, designed to withstand handling on-site. [ Operating temperature: up to 100°C ]
● Limited infrared irradiation area ● High radiation efficiency ● Reduced running costs and CO2 emissions ● Quick startup ● Soft light emission color
● Limited infrared irradiation area ● High radiation efficiency ● Reduced running costs and CO2 emissions ● Quick startup ● Soft light color ● Applicable locations ● Adjustable tilt
Energy-saving equipment that contributes to environmental conservation through high-efficiency reflectors.
● Limited infrared irradiation area By limiting the irradiation of infrared rays to the heating area, maximum heating effect can be achieved in that area. ● High radiation efficiency Most of the infrared rays emitted from the heat source heater are directed towards the heating area. ● Reduction of running costs and CO2 emissions Due to limited irradiation and high radiation efficiency, the total input of the heating device is reduced, and partial heating operation has also improved. As a result, significant reductions in running costs and CO2 emissions are possible. ● Fast startup Energy can be ramped up and down almost simultaneously with the switch ON/OFF (3-5 seconds). ● Soft light color There is no glare like that of halogen lamps, and it emits a charcoal color. ● Applicable locations It is suitable for spot heating in large spaces. ● Control method Output can be easily varied using an adjustable volume.
Energy-saving equipment that contributes to environmental conservation through high-efficiency reflectors.
● Limited infrared irradiation area By limiting infrared irradiation to the heating area, maximum heating effect can be achieved in that area. ● High radiation efficiency Most of the infrared radiation emitted from the heat source heater is directed towards the heating area. ● Reduced running costs and CO2 emissions Due to limited irradiation and high radiation efficiency, the total input of the heating device is reduced, and partial heating operation has also improved. As a result, it has become possible to reduce running costs and CO2 emissions. ● Fast startup Energy can be ramped up and down almost simultaneously with the switch ON/OFF (3-5 seconds). ● Soft light color It emits a charcoal color without the glare typical of halogen lamps. ● Applicable locations It is suitable for zone heating and spot heating in large spaces. ● Swiveling capability The heater can swivel up and down freely by 60° in the direction of irradiation.
Band heater with temperature controller for short pot (100V) / Model number M1483KS-2214H *Pot not included
● This is a silicone rubber heater with a temperature controller for use with a stockpot. ● You can easily heat and maintain the temperature of the liquid by simply filling the stockpot with the desired liquid and connecting the power. ● The silicone rubber heater comes with a temperature controller (30–80 °C), allowing you to heat and maintain the temperature at your desired level. (The temperature sensor detects the surface temperature of the heater for control.) ● It is equipped with an over-temperature prevention feature (temperature fuse). ● Since the heater is mounted outside the stockpot, there are no obstructive structures inside the stockpot. ● When washing the stockpot or replacing the heater, the heater can be easily removed and attached. ● The silicone rubber heater can also be installed and used with another container of the same dimensions as the applicable stockpot.
High-standard series equipped with a large operation panel. Easy to operate and easy to read display.
●Main Features ・Driving mode retention function ・Quiet design ・Child lock ・High altitude switch mode ・Enamel grill ・24-hour digital timer ・Earthquake automatic extinguishing device ・Incomplete combustion prevention device
User-friendly standard type
■Power-saving and Safety Timer (60-minute Timer) A timer that automatically turns off the power when the time is up, adjustable for a maximum of 60 minutes. By setting the usage time in advance, it helps prevent forgetting to turn it off.
A heater that warms drums and similar containers to loosen the viscosity of liquids.
Heater for warming drums and similar containers to reduce the viscosity of liquids ◎ Selectable by container type Due to its reinforced fabric, it can accommodate various shapes such as square and cylindrical containers, as well as various capacities from one-gallon cans to IBC containers. * Not suitable for containers with highly flammable liquids. * The set temperature of the heating wire refers to the temperature of the heating wire inside the jacket. Please note that the liquid inside the container will not reach the set temperature.
It is a device that heats and melts solid lard from the bottom of a can, using an electric heater as the heat source, specifically designed for melting lard.
● There is a timer as a safety device. ● There is a thermostat (not adjustable in-store) as a safety device. ● It is equipped with a dry-burning prevention device as a safety feature. ● There are side walls as a safety device. ● It has a handle for easy carrying.
