1～9 item / All 9 items
簡単な操作で取り付け可能！
『プラグ型ヒーター』は、タンクなどに穴開けし、パッキンを介して ナット止めするだけの簡単な操作で取り付けることができるヒーターです。 そのほか、ネジプラグにシーズヒーターのシースを溶接しタンクなどに 溶接されたパイプカップリングにねじ込む方法でも取り付け可能です。 【ネジ部基本仕様】 ■PF(2～2 1/2) ・H：60～ ・T：12～15 ・L：25 ・B：63～ ■PT(1 1/4～2 1/2) ・H：60～ ・T：12～15 ・L：25 ・B：63～ ※詳しくはPDFをダウンロードして頂くか、お気軽にお問合せください。
Can be mounted on pipe flanges! For places requiring sealing or under high pressure!
The "flange heater" is a heater that has a sheath heater welded to a plate flange, allowing it to be mounted on a pipe flange. It can be used in areas that require airtightness or where high pressure is applied. Additionally, the diameter of the flange and the arrangement of the heater can be freely manufactured. 【Basic specifications for flange part (JIS 5K)】 ■ Type: 50~400A ・H: 60～ ・T: 14～ ・Φh: 15～ ・B: 130～ ・C: 105～ *For more details, please download the PDF or feel free to contact us.
The shape of the screws can be changed according to the mounting part! Installation and removal will become easier.
The "mounting type heater" is a heater that has been made easy to install and remove by welding mounting screws and other components to the outer pipe of various sheath heaters. Depending on the specifications of the mounting part, it is also possible to change the shape and dimensions of the mounting screws. It can be directly immersed in gases, liquids, other light metals, molten slag, etc. for use. 【Specifications】 ■ Screw length C: 13 to any length ■ Screw diameter M: M12 to any diameter ■ Flange diameter ΦD: 22Φ to any diameter ■ Flange thickness t: 3t to 6t ■ Screw material: BSBM, SUS ■ Shape: Various shapes are possible in addition to the examples shown. *For more details, please download the PDF or feel free to contact us.
We design and manufacture explosion-proof heaters that require certification from the Industrial Safety Research Institute.
In our company, when installing "explosion-proof heaters" in hazardous locations, we design and manufacture them based on the "Guidelines for Explosion-Proof Electrical Equipment in Factories." Additionally, if certification from the Industrial Safety Research Institute is not required, we can also manufacture quasi-explosion-proof types designed and produced in accordance with the explosion-proof guidelines. Please feel free to consult us if you have any requests. *Please note that general electric heaters alone are not subject to the explosion-proof guidelines, so we recommend that you undergo explosion-proof testing for the entire equipment or device that incorporates the explosion-proof heater. *For more details, please download the PDF or feel free to contact us.
An electric heater with infinite adaptability to heating.
The "sheath heater" is an electric heater that can be freely bent and is widely used as a basic heater, including immersion heaters, cast-in heaters, and fin heaters. The sheath material for the heater can be supplied according to your usage conditions, with the most common options being copper, steel, stainless steel, and aluminum. Its range of applications is broad, including industrial, commercial, and household electric heating devices, offering a variety of options. 【Features】 ■ Strength and durability ■ Excellent durability ■ High thermal efficiency ■ Outstanding safety ■ Easy installation ■ Wide adaptability *For more details, please download the PDF or feel free to contact us.
It is possible to provide localized heating that is superior in both spatial and cost aspects.
The "cartridge heater" is available in both single-phase and three-phase versions, and it has excellent features in terms of space and cost. The terminal section can be made to suit the usage conditions, with options for general heating and waterproof types. Due to its unique heating wire configuration, the terminals are gathered on one side, allowing for concentrated local heating simply by inserting it into a pre-prepared hole, even in narrow spaces or complex shapes of non-heated bodies. 【Lineup】 ■ Standard type ■ Waterproof type ■ Flange type ■ Waterproof flange type ■ Plug type ■ Waterproof plug type *For more details, please download the PDF or feel free to contact us.
Enhance heat dissipation with metal fins! Widely used for heating stagnant air!
The "Finned Sheath Heater" is a heater designed for the purpose of heating air through forced air circulation. It features a straight tubular heater wrapped with strip-shaped metal fins to enhance the heat dissipation effect. Additionally, depending on the sheath diameter and fin width, bending processing is also possible. 【Specifications】 ■ Sheath Material: SUS304, SUS316L ■ Sheath Length: 250–5000 ■ Sheath Diameter: 10, 12, 14, 16Φ ■ Fin Material: SUS304 ■ Fin Width: 7, 10 ■ Fin Thickness: 0.3 ■ Shape: Various bending processes are possible besides U-shape ■ Surface Treatment: Surface processing such as coating is possible *For more details, please download the PDF or feel free to contact us.
Enhanced far-infrared effects and corrosion resistance! Free design is possible.
"Various surface treatment heaters" can enhance infrared effects and improve corrosion resistance by bonding a coating to the surface of the sheath through methods such as painting, thermal spraying, or acid cleaning, compared to sheath heaters. Mechanical processing such as micro-machining and surface polishing is also possible depending on the shape. 【Specifications】 ■ Sheath material: STP, SUS ■ Sheath diameter: 8 to 16 mm ■ Processed shapes: Various bending processes are possible ■ Acid cleaning treatment: Possible for various shapes ■ Far infrared treatment: Possible depending on the shape ■ Processing treatment: Various treatments such as mechanical and coating are possible depending on the shape ■ Terminal specifications: Various terminal types can be selected ■ Others: Can also be manufactured for use with integrated housings, etc. *For more details, please download the PDF or feel free to contact us.
Suitable for uniform heating on surfaces! Can be produced in various shapes.
The "cast-in heater" is a heater that incorporates a sheath heater into cast materials such as aluminum and iron, allowing it to be closely attached to the object being heated. It is suitable for uniform heating against a "surface" and can be produced in various shapes, from simple ones like heat plates to more complex designs. Additionally, by using a cartridge-type heater and minimizing the gap between the cast and the heater through micro-processing, it becomes possible to insert and remove the heater, improving efficiency during maintenance. 【Specifications】 ■ Sheath material: STP, SUS ■ Sheath diameter: 8 to 14 mm ■ Internal shape: Custom shape according to usage range ■ Body shape: Custom shape according to installation and usage conditions ■ Terminal specifications: Various terminal types available ■ Surface treatment: Various treatments such as machining and coating are possible ■ Others: Can be used in conjunction with cooling pipes, etc. *For more details, please download the PDF or feel free to contact us.
