Last Updated： Aggregation Period:May 27, 2026～Jun 23, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:May 27, 2026～Jun 23, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:May 27, 2026～Jun 23, 2026
This ranking is based on the number of page views on our site.
211～240 item / All 644 items
For removing dirt from the boiled noodle tank.
The strong alkaline effect quickly removes dirt, reducing cleaning time. *For more details, please refer to the catalog or feel free to contact us.*
Durable cast iron with a pressure-free open design for safety! A resource-saving model that can be used semi-permanently.
The "RMO Series" is a cast iron, non-pressurized open-type hot water heater that utilizes microcomputer control for both oil and gas heating, enhancing safety and ease of use. The heater itself is a non-pressurized open type, eliminating the risk of bursting. Additionally, it features fully automatic control equipment that prioritizes safety, ensuring multiple layers of thorough safety management. 【Features】 ■ Made of cast iron for exceptional longevity ■ Energy-efficient design with a heater efficiency of 90% ■ Safe design as a non-pressurized open type ■ Equipped with multifunctional microcomputer control "Heater Controller" ■ Easy to handle with no qualifications or inspections required *For more details, please refer to the PDF materials or feel free to contact us.
It is also ideal for preventing freezing and heating your room.
"Den Pane" is a wall-mounted electric panel heater that is ideal for heating rooms and preventing freezing. It operates silently through radiation and natural convection, features a high-performance built-in thermostat with low temperature differential, and is cost-effective in terms of electricity usage. Additionally, it comes in a rich variety of 11 types and 16 models, with a simple design that can be used in any location. [Features] ■ Safe and clean ■ Quiet ■ Excellent controllability *For more details, please refer to the catalog or feel free to contact us.
Achieve non-contact measurement of active power! No electrical work required, and can be retrofitted to existing wiring.
We would like to introduce our IoT power sensor unit, the 'DDS Series'. Installation requires no electrical work and can be completed in 15 seconds. It accommodates power factor variations and can measure active power. It can be installed in various locations, such as the primary side of distribution boards, manufacturing equipment, and associated devices. Please feel free to contact us if you need assistance. 【Features】 ■ Non-contact measurement of active power ■ No electrical work required; can be retrofitted to existing wiring ■ The opening and closing sensor head is coreless, lightweight, and compact *For more details, please download the PDF or feel free to contact us.
It warms the body from the core with wavelengths of 3 to 20 microns that are easily absorbed by the human body. Introducing far infrared heaters.
The "Heat Spot" is a commercial heating device manufactured by Suiden. During operation, the lamp lights up to prevent forgetting to turn it off, and it has a built-in safety device that stops operation in the event of a fall. Additionally, the thermal switch stops operation in case of abnormal overheating. We offer a lineup that includes the high-performance standard type "SEH-15A-2," as well as twin types that cover a wide area and high-power triple types. 【Features】 ■ One-touch switching (single type) ■ Operation lamp ■ Angle adjustment (twin and triple types) ■ Caster mobility (twin and triple types) ■ Safety device *For more details, please refer to the PDF materials or feel free to contact us.
Providing better on-site environments centered around industrial equipment and machinery!
Seishin Co., Ltd. is a company that specializes in the sale of automation and measurement management equipment for the manufacturing industry within the prefecture. We handle heating equipment such as self-regulating parallel circuit "Heater Auto Trace" and "Drum Heaters" that heat gently at safe temperatures, and we are involved in various businesses including the powder equipment division and the chemical machinery division. Focusing on industrial equipment, we provide accurate product proposals and introductions, striving to build better working environments together with our customers. 【Business Activities】 ■ Self-regulating Heater Auto Trace ■ Other Heating Equipment ■ Powder Equipment Division ■ Chemical Machinery Division ■ Other Divisions *For more details, please download the PDF or feel free to contact us.
Durable self-regulating heater with safe temperature control.
"Auto Trace" is a self-regulating heater for parallel circuits. It provides reliable and safe electric heating and insulation without the risk of abnormal overheating or burnout, even without the use of a thermostat. Additionally, due to its continuous parallel circuit structure, it can be cut to the required length on-site. 【Features】 ■ Highly flexible, making installation very easy ■ Current flows through a continuous heating circuit formed between parallel conductors within the heating resistance element ■ Resistance element made from a special blend of polymer and conductive carbon ■ Countless parallel electrical circuits are formed along the entire length of the two conductors ■ When the element heats up, this core expands slightly *For more details, please refer to the PDF document or feel free to contact us.
PTC characteristic film heater with self-regulating function
Minco's SLT (Self-Limiting Technology) heater was developed as a replacement for traditional heaters and temperature controllers. It uses patented PTC characteristics with polymer materials and meets various temperature control requirements without the need for temperature sensors or controllers. This simplifies system design and reduces manufacturing and operational costs. Heaters designed for each application adjust their output according to the usage environment, achieving self-temperature control. Unlike existing PTC heaters from other companies, its film-like structure provides flexibility and lightweight characteristics, avoiding constraints during application. The resistance of the polymer compound increases exponentially once the designed temperature is reached, automatically suppressing power. This eliminates the risk of overheating, making it suitable for environments where safety is a priority.
We also handle UL-compliant products! Such as polyimide, silicone rubber, mica, and transparent polyester.
Minko Products has been providing thermal solutions since its establishment in Minneapolis, USA, in 1956. This document introduces the performance of Minko's flexible heaters categorized by the type of insulation material, including usage temperature. You can view a list of heaters that can be used for various applications, including standard products, waterproof, high-temperature, industrial, and transparent heaters. 【Main Performance】 ■Standard Products ■Waterproof ■High-Temperature ■Industrial ■Ultra High-Temperature ■Transparent Heaters *For more details, please refer to the PDF document or feel free to contact us.
We will respond to your product and business needs with custom solutions.
Minko Products was established in Minneapolis, USA, in 1956 and has been providing global engineering, sales, and support, with a Japanese subsidiary established in 2012. We offer custom solutions to meet customer requirements from problem discovery to final products in thermal solutions, temperature sensing & control solutions, and flex circuit solutions. [Contents (partial)] ■ About Minko Products ■ Locations of Minko Products ■ Solutions of Minko Products ■ Target markets of Minko Products ■ Minko Products *For more details, please refer to the PDF document or feel free to contact us.
System simplification! Self-regulating film-type heater that does not burn out even during trouble.
"SmartHeat SLT" is a self-regulating film heater that does not burn out even in the event of trouble. Typically, when a heater has poor adhesion, heat accumulates inside the heater, leading to burning issues. However, in the case of this product, the resistance value sharply increases from a certain temperature, stopping the power supply, which prevents it from exceeding a certain temperature and burning out. Additionally, while conventional heaters are affected by changes in temperature when in contact with foreign objects of different temperatures, this product controls each area independently, so only the part in contact with the foreign object adjusts its power to maintain temperature. The surrounding areas do not experience any temperature changes and are not affected. Generally, heaters are used in conjunction with temperature sensors, controllers, and temperature fuses for temperature control, but in the case of this product, these functions are built into the heater, allowing for safe temperature control simply by connecting the power supply. [Features] - Does not burn out even in the event of trouble - Responds to changes in the surrounding environment - Simplified system *For more details, please refer to the PDF document or feel free to contact us.
![[Recruiting Sales Agents] Would you like to add Minko products to your lineup?](https://image.www.ipros.com/public/product/image/660/2000459357/IPROS24569144983355263831.png?w=280&h=280)
We are looking for partners who can help expand the sales of Minko's proven flexible heaters and temperature sensors in the Japanese market.
(Minko Product Benefits) 1. Minko heaters have proven high reliability, even validated by the NASA space program. 2. Unique products that are not found in other heater manufacturers (such as self-regulating heaters). 3. We offer heaters, temperature sensors, and controllers, allowing for sales as a "temperature control package." 4. A range of temperature sensors with distinctive shapes (bolt type, tab type, etc.). (Minko Product Sales) 1. Minko heaters and temperature sensors are American-made products, so they will be sold as imports. 2. Purchases will be made directly from Minko's US headquarters, but Minko Products LLC (Japan branch) will provide support. 3. For any other questions regarding purchasing and resale, please contact Minko Products LLC.
Equipped with a sensor that detects earthquakes and automatically stops! An easy-to-understand and user-friendly control panel.
The "HI Series" is an indirect heater equipped with a large fuel tank that enables long hours of operation. It provides clean warm air to the indoor space without containing gases generated during combustion, while the combustion gases are expelled outside through a chimney. When installed indoors, proper ventilation must be ensured, and a chimney must be installed to discharge combustion gases outside. 【Features】 ■ Equipped with a large fuel tank for long hours of operation ■ Delivers clean warm air ■ Easy-to-understand and user-friendly control panel ■ Built-in sensor that detects earthquakes and automatically stops operation ■ Stackable for storage *For more details, please refer to the PDF document or feel free to contact us.
Protects dry skin from irritation with a ceramic speed hot air and ultrasonic humidifying mist!
This is a ceramic fan heater with ultrasonic humidification function. Despite its compact size, it heats up quickly and does not cause concern about air pollution. The ultrasonic humidification function protects the skin from dryness with its moisturizing mist. You can comfortably enjoy both heating and humidification in one unit during the cold season. ■Features - The warm air mode has three levels: low, medium, and high. It features a 120° automatic oscillation mode and a manual knob for 135° vertical airflow adjustment, providing powerful warm air. - The humidification mode disperses a moisturizing mist from the double outlets on the protruding part of the main unit using ultrasonic technology. - Two types of humidification can be adjusted: continuous humidification and intermittent humidification at 5-second intervals. It operates quietly and is energy-efficient. - When you pull out the protruding part of the main unit, a water tank cassette is stored inside, with a capacity of 400ml and a filter included. - The warm air and humidification functions can be operated independently. The operation is simple with touch buttons. It has a safety feature that automatically turns off the power in case of tipping over, and overheating protection with an automatic OFF function after 12 hours of heater operation and 5 hours of humidifier operation, ensuring peace of mind against forgetting to turn it off. - The protruding part of the main unit can illuminate with 7 colors of LED lights (continuous or fixed) to create an ambiance.
Ceramic rapid heating performance in as little as 2 seconds, lightweight tabletop design, convenient to place anywhere!
This is a compact-sized ceramic fan heater. It features rapid heating performance in as little as 2 seconds, is lightweight and tabletop-style, making it convenient to place anywhere. Moreover, it is an energy-saving type that does not worry about air pollution. It has protective features such as automatic power off in case of overheating and when the unit is tipped over. ■Features - The warm air mode has two levels: low and high. When the switch is turned on, it provides rapid heating performance in as little as 2 seconds. - It has a 90° automatic oscillation mode. The front of the base is equipped with an LED light panel that lights up blue during airflow, red (50% brightness) for low warm air, and red for high warm air. - It is equipped with a temperature overheat sensor that provides automatic power off protection when high temperatures are detected. - There is an automatic power off protection feature when the unit is tipped over, allowing for safe use at home. - Maintenance is simple; just use a vacuum cleaner to suck up dust. The intake cover on the back can be removed, and the activated carbon filter inside has deodorizing effects and can be washed with water. - Weighing only 1.2 kg, it is a lightweight, compact tabletop model. It is easy to carry and very convenient for quick heating in the living room, at your desk, or even in the kitchen and changing room.
Powerful warm air with a wingless air duct structure, and a mist moisturizing function with ultrasonic humidification!
This is a ceramic heating fan heater with ultrasonic humidification function. Due to the ceramic heater, the warming speed is fast, approximately 3 seconds, and there is no worry about fire hazards or air pollution. The warm air mode has three levels: low, medium, and high. The temperature can be set from 20°C to 30°C (in 1°C increments), with a maximum output of 1,200W. It features a bladeless air duct structure for powerful warm air and an automatic oscillation mode with a 50-degree range. It operates quietly at a maximum of 55dB and includes a timer for up to 12 hours. In humidification mode, it disperses moisture-rich mist by breaking down water into fine particles using ultrasonic technology. It provides quiet humidification and can be used for up to 10 hours with a 1L tank capacity. It effectively humidifies without disturbing sleep. The mist outlet on the control panel can be adjusted to about 170° for angle adjustment. The warm air and humidification functions can be operated independently. It features an LED digital panel for temperature display, an automatic power-off protection function in case of tipping, and a remote control (sensor range of 5m). It has a drainage plug for easy and hygienic water disposal. The tower design makes it easy to carry and does not take up much space. It is convenient not only for the living room but also for areas where heating is difficult, such as the kitchen, entrance, or during changing.
Enjoy the cozy feeling of flickering fireplace-like lighting with approximately 3 seconds of rapid heating performance from the ceramic!
This is a tower-type ceramic fan heater. It features rapid heating performance in about 3 seconds and a fireplace-like lighting function that soothes with a flickering effect similar to real flames, enhancing the sense of warmth. It also matches well with interior decor as an indirect light source. There are safety features for overheating and automatic power-off in case of tipping. ■Features - The fan and warm air modes can be switched between weak and strong in two levels. When switched on, it has rapid heating performance in as little as 3 seconds. It includes an automatic oscillation mode with an 80° range to the left and right, and a temperature setting mode (set between 18°C to 45°C in 1°C increments). - The operation buttons are on the top, and the LED display on the upper side of the tower shows the indoor temperature and the operating mode, which lights up accordingly. It has a timer (up to 8 hours, in 1-hour increments). - Equipped with a temperature overheat sensor, it has an automatic power-off protection feature when high temperatures are detected. - There is an automatic power-off protection feature in case the unit tips over, allowing for safe use at home. - Maintenance involves using a vacuum to remove dust from the air outlet panel and intake, and a cloth for wiping the surface of the unit. - Weighing approximately 3.4 kg, it has a stylish slim tower design. It comes with a remote control (with a storage pocket on the unit). It is easy to carry and very convenient for quick heating in kitchens or changing rooms.
A rechargeable hand warmer that simultaneously warms the neck, hands, and chest for about 3 seconds! It comes with a mobile battery function.
■Features - This is a 3-in-1 neck-mounted rechargeable hand warmer that warms not only the neck but also the hands and chest simultaneously. - The hand warmer itself is designed to be worn around the neck with a neck strap. The strap also serves as a power cord with USB connectors (Type-C and Type-A) on both ends. - The warming function has two adjustable modes: weak mode at 45°C and strong mode at 55°C, with a rapid warming effect in about 3 seconds. It can also be used independently without the strap. - The power button is located on the front, while the neck heat conduction button is on the back. The display panel allows you to check the settings and remaining battery life. - It can be charged via USB (5000mAh) using a computer's USB port. Additionally, it has a mobile battery function, allowing you to charge smartphone devices from the USB port on the unit, making it convenient. - Inside the transparent cover at the top of the unit, there are cute figures of a cat, dog, and swan, and when you blow on the atmosphere light sensor, the light inside the cover turns on for added enjoyment. - When going out, wearing it around your neck and wrapping a scarf or muffler around it enhances its effectiveness. The unit can also be used in a pocket by removing the strap, allowing for various wearable applications.
By attaching it to the inner wall of the transport/storage container, it is possible to easily create a constant temperature environment!
"Fabtech" is a thin film surface heater that can easily create a constant temperature environment by being attached to a temperature-controlled transport box. Since it is a surface heating element based on carbon nanotubes, it allows for high-precision temperature control and can maintain the set temperature without being affected by the surrounding temperature of the box (from below freezing to room temperature). With a thickness of 0.2mm and insulated and waterproofed, it is suitable for various types of contents. The size can be custom-designed, so please consult us for applications in warehouses, transport containers, etc. 【Features】 ■ Easily create a constant temperature environment by attaching it to the inner wall of transport/storage containers. ■ High-precision temperature control is possible due to the surface heating element based on carbon nanotubes. ■ Maintains the set temperature without being affected by the surrounding temperature of the box (from below freezing to room temperature). ■ With a thickness of 0.2mm and insulated and waterproofed, it is suitable for various types of contents. ■ Size can be custom-designed. ■ The heating temperature range and usage time are determined by the type of power supply. *For more details, please refer to the PDF document or feel free to contact us.
Easily detachable from large diameter to small diameter piping! Suitable for plants such as chemical products.
The "pipe heater" we handle can be easily attached and detached from pipes of various diameters, from large to small. Furthermore, our product is suitable for plants dealing with chemical products that require temperature management, as it provides a uniform temperature distribution. If high-precision temperature control is necessary, please consider purchasing it along with a dedicated control device. We can provide a system capable of automatic control for up to 16 channels. 【Features】 ■ Uniform temperature distribution ■ Suitable for plants dealing with chemical products that require temperature management *For more details, please refer to the PDF document or feel free to contact us.
Some commercial products can be equipped with built-in fabric heaters to add functions such as heat retention!
Our "Fabric Heater" can be resin-impregnated. By incorporating the fabric heater into some commercially available FRP products, it is possible to add functions such as heat retention. When used in cylindrical or flat plate forms, it is also possible to impregnate resin mortar to warm the road surface. A wide range of resins is available, so please feel free to consult us. *For more details, please refer to the PDF materials or feel free to contact us.
It also works well for roof snow melting! You can quickly confirm the difference in snow melting capability!
The fabric heater we offer has a fast snow melting speed. When installed side by side on a gabled roof, you can quickly observe the difference in snow melting capability between the fabric heater and a conventional heater. The specifications and installation methods of the fabric heater vary depending on the roofing material, so please contact us for more details. *For more information, please refer to the PDF materials or feel free to contact us.
![[Case Study] Development of Snowfall Prevention Heater](https://image.www.ipros.com/public/product/image/bf5/2000462128/IPROS22116362119617955580.jpeg?w=280&h=280)
Adhere a highly durable polyurea resin to the surface by impregnating it into the fabric heater.
At JR East, we have been developing our fabric heater as a measure against icicles on the walking surface and sides of station platforms. The development has been completed, and we have been working to provide it to the private sector since the first year of Reiwa. Installation has already begun at customer entrances in commercial facilities. Compared to traditional methods that involve embedding electric heating wires, this method reduces construction costs and running costs. [Case Study] - Purpose: Development of a thin snow-melting device that can be installed even in narrow areas like the edges of platforms. - Developed Product: Snowfall Prevention Heater *For more details, please refer to the PDF materials or feel free to contact us.
PET film laminated heater with high planar maintenance strength, making planar construction easy.
The "Snow Melting Nano Mat" is a 1mm thick PET film laminated heater. It is thin and lightweight (can be adhered), and has high flatness maintenance strength, making flat installation easy. The units supplied to NEXCO for ETC vehicle detectors are used in "vehicle detector installation locations" and "snow melting locations for vehicle detectors." 【Features】 ■ Thin and lightweight (can be adhered) ■ High flatness maintenance strength makes flat installation easy ■ Quick heating *For more details, please refer to the PDF materials or feel free to contact us.
Ideal for bathrooms, pools, etc.
It is widely used in facilities such as bathing areas in nursing homes and indoor pools. If you have any concerns about cold temperatures in new properties or existing properties' bathrooms, please feel free to consult with us. If you let us know the size of the room, we will select and propose the most suitable model. Additionally, by managing the room temperature, we can maintain a comfortable environment and reduce running costs.
Infinite adaptability to heating! A sheath heater that can be freely bent and shaped.
This catalog is a product catalog from Tomioka Sangyo Co., Ltd., a comprehensive manufacturer of electric heating devices that consistently handles everything from orders to design, production, and sales of various types of heating elements, primarily focusing on various electric heating equipment. It features a wide range of heating elements, including bendable options, cast-in heaters, and fin heaters, which are widely used as basic heaters. [Contents] ■ Heating Elements ■ Fin-Type Heating Elements ■ Cartridge Heaters ■ Mountable Heaters ■ Plug-Type Heaters, etc. *For more details, please download the PDF or feel free to contact us.
簡単な操作で取り付け可能！
『プラグ型ヒーター』は、タンクなどに穴開けし、パッキンを介して ナット止めするだけの簡単な操作で取り付けることができるヒーターです。 そのほか、ネジプラグにシーズヒーターのシースを溶接しタンクなどに 溶接されたパイプカップリングにねじ込む方法でも取り付け可能です。 【ネジ部基本仕様】 ■PF(2～2 1/2) ・H：60～ ・T：12～15 ・L：25 ・B：63～ ■PT(1 1/4～2 1/2) ・H：60～ ・T：12～15 ・L：25 ・B：63～ ※詳しくはPDFをダウンロードして頂くか、お気軽にお問合せください。
Can be mounted on pipe flanges! For places requiring sealing or under high pressure!
The "flange heater" is a heater that has a sheath heater welded to a plate flange, allowing it to be mounted on a pipe flange. It can be used in areas that require airtightness or where high pressure is applied. Additionally, the diameter of the flange and the arrangement of the heater can be freely manufactured. 【Basic specifications for flange part (JIS 5K)】 ■ Type: 50~400A ・H: 60～ ・T: 14～ ・Φh: 15～ ・B: 130～ ・C: 105～ *For more details, please download the PDF or feel free to contact us.
The shape of the screws can be changed according to the mounting part! Installation and removal will become easier.
The "mounting type heater" is a heater that has been made easy to install and remove by welding mounting screws and other components to the outer pipe of various sheath heaters. Depending on the specifications of the mounting part, it is also possible to change the shape and dimensions of the mounting screws. It can be directly immersed in gases, liquids, other light metals, molten slag, etc. for use. 【Specifications】 ■ Screw length C: 13 to any length ■ Screw diameter M: M12 to any diameter ■ Flange diameter ΦD: 22Φ to any diameter ■ Flange thickness t: 3t to 6t ■ Screw material: BSBM, SUS ■ Shape: Various shapes are possible in addition to the examples shown. *For more details, please download the PDF or feel free to contact us.
