Last Updated： Aggregation Period:Jul 22, 2026～Aug 18, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jul 22, 2026～Aug 18, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jul 22, 2026～Aug 18, 2026
This ranking is based on the number of page views on our site.
241～270 item / All 367 items
Short ratchet handle with socket hold mechanism
Insertion angle: convex 12.7mm. The socket can be easily attached and detached with one push, and it has a socket hold mechanism that makes it difficult to come off during work. Its palm-sized and short length make it ideal for working in tight spaces. The ratchet mechanism allows for easy and quick rotation work.
Round type, swivel head standard ratchet handle
Insert angle: Convex 12.7mm. A round swivel ratchet handle that improves work efficiency with a swivel type. The angle of the head can be adjusted, making it ideal for working in tight spaces that are hard to reach. The ratchet mechanism allows for easy and quick turning tasks.
When using for quick tightening such as temporary fastening, hold the handle upright, and when the handle is horizontal, it can be used for final tightening with a spinner handle.
Insert angle: 19.0mm. A spinner handle that bends 90° to the left and right around a pin located at the head of the square drive, allowing it to be used at any angle. When quickly tightening, use the handle upright, and when the handle is horizontal, it can be used for final tightening.
25.4mm square drive oval standard ratchet handle
Insertion angle: Convex 25.4mm. Standard oval ratchet handle. Used for tightening and loosening bolts and nuts. The ratchet mechanism allows for easy and quick turning work.
A ratchet handle (hold type) that has been streamlined to the limit for a slim and lightweight design.
A ratchet handle (hold type) that has been streamlined to the extreme without losing operability, functionality, or strength, making it thin, lightweight, and compact. It features 72 teeth with a 5° increment. The head is more compact compared to conventional models, allowing for efficient use in tight spaces. It has a socket hold mechanism that makes socket attachment and detachment easy, and it is less likely to come off during work. Socket replacement can be done with a one-push operation. Drive size: 6.35mm (1/4").
A ratchet handle (hold type) that has been streamlined to the limit for a slim and lightweight design.
Compact short ratchet handle (hold type) that has been slimmed down, lightweight, and compacted to the limit without losing operability, functionality, or strength. It features 60 teeth with a 6° engagement angle. The head is smaller than conventional models, and the overall length is shorter, making it ideal for working in tight spaces. It has an easy socket attachment and detachment mechanism, and a socket hold mechanism that makes it difficult for the socket to come off during use. Socket replacement can be done with a one-push operation. Drive size: 6.35mm (1/4").
A ratchet handle (hold type) that has been streamlined to the limit for a slim and lightweight design.
A ratchet handle (hold type) that has been slimmed down, lightweight, and compacted to the extreme without losing operability, functionality, or strength. It features 72 teeth with a 5° increment. The head is more compact compared to conventional models, allowing for efficient use in tight spaces. It has an easy socket attachment and detachment mechanism, and a socket hold mechanism that prevents the socket from coming off during work. Socket replacement can be done with a one-push operation. Drive size: 9.5mm (3/8").
A ratchet handle (hold type) that has been trimmed down to the limit for a slim and lightweight design.
A swivel ratchet handle (hold type) that has been slimmed down, lightweight, and compacted to the extreme without losing operability, functionality, or strength. It features 72 teeth with a 5° increment. The ratchet head can be adjusted in 15° increments. The handle shape is easy to grip. Socket replacement is possible with a one-push operation. Drive size: 9.5mm (3/8").
A ratchet handle (hold type) that has been streamlined to the extreme for a thin and lightweight design.
A ratchet handle (hold type) that has been streamlined to the extreme without losing operability, functionality, or strength, achieving a thin, lightweight, and compact design. It features 72 teeth with a 5° drive angle. The head is more compact compared to conventional models, allowing for efficient operation in tight spaces. It has an easy socket attachment and detachment mechanism, and a socket hold mechanism that prevents the socket from coming off during work. Socket replacement can be done with a one-push operation. Drive square: 12.7mm (1/2").
A ratchet handle (hold type) that has been streamlined to the limit for a thin and lightweight design.
A compact ratchet handle (hold type) that has been streamlined to the extreme without losing operability, functionality, or strength, making it thin, lightweight, and compact. It features 72 teeth with a 5° increment. The head is smaller than conventional models, and the overall length is shorter, making it ideal for working in tight spaces. It has a socket hold mechanism that makes socket attachment and detachment easy and prevents the socket from coming loose during use. Socket replacement can be done with a one-push operation. Drive size: 12.7mm (1/2").
A ratchet handle (hold type) that has been streamlined to the limit for a thin and lightweight design.
Long swivel ratchet handle (hold type) that has been streamlined to the extreme without losing operability, functionality, or strength, making it thin, lightweight, and compact. It features 72 teeth with a 5° increment. The ratchet head can be adjusted in 15° increments. The handle shape is easy to grip. Socket replacement can be done with a one-push operation. Its long size makes it ideal for working in hard-to-reach areas. Drive size: 12.7mm (1/2").
A ratchet handle (hold type) that has been streamlined to the limit for a slim and lightweight design.
Ultra-long pivoting ratchet handle (hold type) that has been slimmed down, lightweight, and compacted to the limit without losing operability, functionality, or strength. It features 72 teeth with a 5° increment; the ratchet head can be adjusted in 15° increments. The handle shape is easy to grip. Socket replacement is possible with a one-push operation. Its ultra-long design makes it ideal for working in deep areas. Drive size: 12.7mm (1/2").
A short spinner handle that can be raised during early winding and laid horizontally for final tightening.
Insert angle: 6.35mm A short spinner handle with a square drive that bends 90° to the left and right around a pin located at the head of the handle, allowing for angle adjustments in 15-degree increments. When quickly tightening during temporary fastening, use the handle upright; when the handle is horizontal, it can be used for final tightening. Repairs are possible if a repair kit is purchased separately.
A spinner handle that can be raised for quick return and laid horizontally for final tightening.
Insertion angle: 6.35mm A spinner handle that bends 90° to the left and right around a pin located at the head of the square drive, allowing for angle adjustments of 15 degrees each. When performing quick tightening, use the handle upright, and when the handle is horizontal, it can be used for final tightening. Repairs are possible if a repair kit is purchased separately.
A long spinner handle that can be raised during early return and laid horizontally for final tightening.
Insertion angle: 6.35mm A long spinner handle that bends 90° to the left and right around a pin located at the head of the square drive, allowing for angle adjustments of 15 degrees each. When quickly tightening during temporary fastening, use the handle upright; when the handle is horizontal, it can be used for final tightening. Repairs are possible if a repair kit is purchased separately.
A short spinner handle that can be raised during early winding and laid horizontally for final tightening.
Insert angle: 9.5mm A short spinner handle with a square drive that bends 90° to the left and right around a pin at the head of the handle, allowing for angle adjustments of 15 degrees each. When quickly tightening during temporary fastening, use the handle upright, and when the handle is horizontal, it can be used for final tightening. Repairs are possible if a repair kit is purchased separately.
A short spinner handle that can be raised for quick return and laid horizontally for final tightening.
Insertion angle: 12.7mm A short spinner handle with a square drive that bends 90° to the left and right around a pin at the head of the handle, allowing for angle adjustments of 15 degrees each. When quickly tightening during temporary fastening, use the handle upright, and when the handle is horizontal, it can be used for final tightening. Repairs are possible if a repair kit is purchased separately.
A long spinner handle that can be raised during early winding and laid sideways for final tightening.
Insert angle: 12.7mm The square drive bends 90° to the left and right around a pin located at the head of the handle, allowing for angle adjustments of 15 degrees each, and features a long spinner handle. When quickly tightening during temporary fastening, use the handle upright, and when the handle is horizontal, it can be used for final tightening. Repairs are possible if a repair kit is purchased separately.
The head part can rotate freely 180°, making it ideal for working in recessed areas.
The head can rotate 180° freely and is adjustable in angle (with a locking mechanism), making it ideal for working in recessed areas. This is a swivel ratchet handle (hold type). The socket attachment and detachment is easy with a secure locking hold mechanism. It achieves a gear count equivalent to 144 teeth through two segment cams with 72 teeth, providing a ratchet increment angle of 2.5°. Fine feeding operations are possible. The handle shape is easy to grip, and it features a hollow grip for weight reduction. It comes with a bolster, allowing work with a wrench. Drive square: 9.5mm (3/8").
Products such as sliding door handles and those with a matte finish on stainless steel! A wide variety of lineup.
This catalog introduces "door handles" handled by Shin-Ei Home Create Co., Ltd. It features a variety of products, including "wrought iron," which is crafted by heating and hand-hammering each piece, and "fin handles," which create a natural holding feel. In addition to a wealth of product images, we also provide detailed and easy-to-understand specifications such as colors and materials, so please use this information to assist you in selecting products. [Contents (partial)] ■ Wrought Iron ■ Fin Handles ■ Stainless Steel Matte Colors ■ Square Pipe Handles ■ Semi-Long and Long *For more details, please download the PDF or feel free to contact us.
Mirror finish and hairline finish are available! Rubber for glass doors is also included.
NEW HIKARI is an original brand of Shimizu Corporation. We offer a wide range of construction hardware, door fittings, and equipment hardware for professional craftsmen and specialized contractors, and we have been appreciated for our reliable quality over many years. The "All Stainless O-Type Double-Sided Door Handle" is a high-quality stainless steel door handle. The tightening bolt M8×70mm is compatible with door thicknesses of 10 to 40mm, while the tightening bolt M8×90mm is suitable for door thicknesses of 40 to 55mm. Rubber for glass doors is also included. 【Features】 ■ High-quality stainless steel door handle ■ Available in mirror finish and hairline finish ■ Three sizes: 300mm, 450mm, and 600mm ■ Compatible with door thicknesses from 10mm to 55mm ■ Tightening bolt M8×70mm is suitable for door thicknesses of 10 to 40mm *For more details, please download the PDF or feel free to contact us.
Recommended handles for furniture doors and drawers! Mounting screws are included.
NEW HIKARI is the original brand of Shimizu Corporation. We offer a wide range of construction hardware, fittings, and equipment hardware for professional craftsmen and specialized contractors. Our products have been cherished for many years due to their reliable quality. Our company handles the "Stainless Steel Surface-Mounted Mirror Handle." This handle is recommended for furniture doors and drawers, available in two types: hairline and mirror finish. Mounting screws are included. 【Features】 ■ Recommended handle for furniture doors and drawers ■ Available in hairline and mirror finish ■ Mounting screws included *For more details, please download the PDF or feel free to contact us.
A simple handle that can be used in either vertical or horizontal orientation! It is suitable for doors and furniture handles.
NEW HIKARI is the original brand of Shimizu Corporation. We offer a wide range of construction hardware, fittings, and equipment for professional craftsmen and specialized contractors. We have been appreciated for our reliable quality across various fields for many years. Our company handles the "Stainless Steel Round Bar Handle (Back Screw)." It is a simple handle that can be used in either vertical or horizontal orientation, making it suitable for doors and furniture. 【Features】 ■ A simple handle that can be used in either vertical or horizontal orientation ■ Suitable for doors and furniture ■ Includes mounting screws *For more details, please download the PDF or feel free to contact us.
Equipped with a gear lock button in addition to the conventional ratchet function. This single tool can handle everything from initial tightening to final tightening.
The "Tough Lock" is a ratchet handle equipped with a gear lock button in addition to the conventional ratchet function. It can handle tightening with just this one tool. 【Features】 ○ Switch rotation by turning the dial to set it to R/L for use ○ Socket attachment and detachment is easy with a one-touch mechanism ○ Lock the gear with a button push! Allows for tightening ○ Ergonomically designed for easy grip, improving work efficiency and focus For more details, please contact us or download the catalog.
About half the price of major domestic manufacturers and very inexpensive.
【Specifications】 ○ L Handle OH1/2-10 ○ JAN: 4511372152489 ○ Name: L Handle ○ Abbreviated Name: OH1/2-10 ○ Number of Corners: None ○ Guaranteed Torque (N.m): None ○ Carton Quantity: 40 ○ Small Box: 4 For more details, please contact us or download the catalog.
About half the price of major domestic manufacturers and very inexpensive.
【Specifications】 ○ Speed Handle SP1/2-15 ○ JAN: 4511372152526 ○ Name: Speed Handle ○ Abbreviated Name: SP1/2-15 ○ Number of Corners: None ○ Guaranteed Torque (N.m): None ○ Carton Quantity: 36 ○ Small Box: 6 For more details, please contact us or download the catalog.
Gold chrome plating finish! Made of zinc die-cast material.
The "MG" is a die-cast handle. The finish color available is "gold chrome plating." We have various other die-cast handles as well. For more details, please contact your nearest sales office or our sales representative. 【Specifications】 ■ Material: Zinc die-cast ■ Finish color: Gold chrome plating *For more details, please refer to the PDF document or feel free to contact us.
Free catalog available! Offering over 80,000 components manufactured worldwide.
Essentra focuses on the manufacturing and distribution of products, providing essential mass production components that serve a diverse range of end markets and regional customers. In this catalog, you can find details about our customizable access solution product range that meets your needs. You can choose from a rich lineup of products manufactured worldwide, tailored to your applications. We are currently offering a free comprehensive catalog! [Contents] ■ Research and Development and Production ■ Quality ■ Key Products ■ Product Range For more details, please refer to the catalog or feel free to contact us. *This catalog is a digest version. If you need the full version, please contact us.
Efforts to identify and eliminate waste through lean production methods.
Essentra Components Japan Inc. understands that continuous improvement in all processes leads to customer satisfaction. We are confident that our products meet your expectations as well as technical and legal requirements. The quality system of Essentra Components Japan Inc. is certified to ISO 9001, and our products are manufactured in compliance with RoHS standards. We also fulfill obligations regarding the registration, evaluation, authorization, and restriction of chemicals (REACH). 【Features】 - Top-quality products - Commitment to identifying and eliminating waste through lean production methods - Continuous development of processes For more details, please contact us or download our catalog.
This is an introduction to millennium handles, drawer handles, and more.
Essentra Components Japan Inc. will continue to improve its products and help realize all possibilities for our customers. As Essentra, we will continue to deliver the best value to our customers using innovative technology and a global sales network. 【Product Lineup】 ○ Millennium Handle ○ Drawer Handle For more details, please contact us or download the catalog.
