Furnace Product List and Ranking from 121 Manufacturers, Suppliers and Companies

Inclined immersion type electric heater holding furnace [reduction type for oxides]

Solving various issues of the aluminum holding furnace! "1. Reduction of oxides" "2. Improved maintainability" "3. Safety" "4. Energy conservation"

<Problems with Reflective Electric Heater Holding Furnaces> - The atmosphere temperature above the aluminum molten metal surface is high at 850°C, which promotes the generation of oxides. <Problems with Under-type Electric Heater Holding Furnaces> - Complete draining of the molten metal is necessary when replacing heater tubes, which poses safety risks such as leaks. <Problems with Vertical Immersion Electric Heater Holding Furnaces> - The heater tubes are exposed above the molten metal surface, resulting in significant heat loss from the furnace body and a high occurrence of oxide generation around the tubes. ~These issues are resolved with the "Diagonal" Immersion Type!~ 【What is a Diagonal Immersion Type Holding Furnace?】 It is a holding furnace equipped with high-efficiency electric heaters installed diagonally downward relative to the aluminum molten metal surface. 1. Reduction of Oxides - Similar to the under-immersion type, the immersion heater is fully submerged in the aluminum molten metal, which suppresses oxide generation. 2. Improved Maintenance - The immersion heater tubes can be replaced by draining the molten metal down to the lower limit of the surface sensor. 3. Safety - Compared to the under-immersion type, there are fewer issues with aluminum molten metal leaks due to the heater's mounting position and structure. 4. Energy Saving - By adopting high-efficiency heaters, the heat loss from the furnace body at the ceiling is minimized. Holding capacity ranges from 500kg to 2000kg.

Company：正英製作所本社、東京支店、名古屋営業所、大阪支店、広島支店、九州支店
Price：Other

Aluminum sash
Steel
others
Furnace

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Heat curing furnace (cure furnace, vulcanization furnace) [Case study introduction]

Heat treatment equipment for thermosetting and thermoplastic resins. We propose optimal heating control and transport control based on the characteristics, production capacity, and installation space of the resin. Numerous achievements both domestically and internationally.

- Adopting optimal heating control and transport control based on the characteristics of the resin, production capacity, and installation space. - Equipped with dedicated transport equipment (gondolas, pallets, carts, rotating rollers, etc.) tailored to the shape of the workpiece. - Ensuring transport routes that can perform the maximum thermal treatment of resin even in limited installation spaces. - To achieve uniform heat treatment, optimal placement of heaters and circulation fans. 【Delivery Example (1)】 Control Temperature: 105±5℃ Equipment Dimensions: W1850 × L4300 × H2500 mm Electrical Capacity: 70kW Processed Material: Thermosetting resin (silicone-based) Transport Equipment: Gondola transport 【Delivery Example (2)】 Control Temperature: 220±5℃ Equipment Dimensions: W3200 × L3350 × H2330 mm Electrical Capacity: 83kW Processed Material: Rubber curing agent Transport Equipment: Cart transport + dedicated pallet transport We will make proposals based on the material, application, quantity, weight, and building conditions of the processed items. We provide total support from the design, manufacturing, installation, maintenance, to after-sales service of industrial furnaces.

Company：正英製作所本社、東京支店、名古屋営業所、大阪支店、広島支店、九州支店
Price：Other

Heat and Drying Treatment Systems
others
Furnace

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Introduction to tests of a hydrogen combustion aluminum melting holding furnace for decarbonization.

A test furnace based on actual equipment, with dissolution using a hydrogen burner and retention using an electric heater. Thorough testing for decarbonization in aluminum casting sites can be conducted together with our customers!

It is possible to conduct aluminum melting tests using hydrogen combustion with ingot input. Please use it to verify the quality of the molten metal and its impact on the products. The melting gas burner employs a hydrogen burner and electric heaters for retention! It is a hybrid furnace that enables carbon neutrality. By exchanging burner parts, you can switch between fuel gases (hydrogen/LNG (natural gas)/LPG), allowing for adaptability to trends in gas supply. Additionally, the furnace structure has a high oxide suppression effect, so you can confirm this effect in actual operation. We are committed to solving problems in aluminum casting sites and promoting low carbon emissions. Please feel free to reach out to us. ~Equipment Overview~ Test Furnace: Aluminum Handheld Melting Retention Furnace (Oxide Suppression Structure) Model: SMH-150H2 Melting Capacity: 150 kg/h Retention Capacity: Retention Chamber 800 kg/ch *Actual effective capacity during continuous melting, specific gravity 2.4 Melting Temperature: 660–680℃ Control Accuracy: ±5℃ ~Heat Source Configuration~ Melting Burner: Hydrogen Combustion Burner 116 kW × 1 unit Retention Heater: Immersion Type Electric Heater 9 kW × 2 units Fuel Used: Hydrogen (city gas 13A and propane gas are also possible) Power Supply: 200V/60Hz for power, 100V for operation

Company：正英製作所本社、東京支店、名古屋営業所、大阪支店、広島支店、九州支店
Price：Other

Aluminum sash
Furnace

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Aluminum handheld melting and holding furnace - Reduction of oxide generation - SMK series

Custom furnace design tailored to customers! Featuring newly developed melting gas burners and holding gas burners! Reduces the generation of oxides!

Aluminum (non-ferrous metal) melting and holding furnace SMK Series We have a wealth of experience not only in Japan but also in China and Southeast Asia (Vietnam, Thailand, etc.). We can provide detailed layout designs tailored to die casting machines, so please feel free to contact us. 【Features】 ◇ Flexible response with custom-made design ◇ Adoption of flat frame burners to suppress the generation of oxides ◇ New design that does not directly apply flame to the molten metal surface, preventing agitation in the holding chamber ◇ Equipped with newly developed melting burners considering flame length, flame diameter, and flame speed ◇ Standard equipped with combustion safety devices ◇ Melting capacity ranges from 100 kg/h to 1000 kg/h Additionally, we handle various aluminum industrial furnaces, including melting and holding furnaces (SMH) with further oxide suppression structures, electric holding furnaces (SEUD), centralized melting furnaces (STM), and aluminum heat treatment furnaces.

Company：正英製作所本社、東京支店、名古屋営業所、大阪支店、広島支店、九州支店
Price：Other

Heat and Drying Treatment Systems
Furnace

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Bioethanol fireplace that produces no smoke or carbon monoxide【*Comprehensive catalog available】

Bring warmth into your interior! We offer stylish European designs at affordable prices.

The bioethanol fireplaces handled by LEBEN are not only excellent as interior decor but also feature stylish designs and constructions popular in Europe, allowing you to enjoy both the flames and the fireplace as part of your interior. 【Features】 ■ The automatic model cuts fuel consumption by one-third ■ Safety is certified by Germany's "TUV," meeting the highest European standards ■ For those concerned about installation, there are models that simply require placement * Comprehensive catalogs are currently being distributed; for more details, please contact us or download the PDF to view.

Company：リーベン
Price：Other

fireplace
Furnace

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Water-based strong carbonization prevention agent "AVION COPPER"

Coating by brushing, dipping, and spraying is possible! It is safe because it does not use solvents or harmful materials.

"AVION COPPER" is a special composition devised by a metallurgist with extensive field experience, which compensates for many of the shortcomings of conventional water-based materials, solves problems, and is an environmentally friendly carbonizing agent. It is highly effective when used in areas exceeding a carburizing depth of 3.0mm, and can be applied by brushing, dipping, or spraying. Currently, it has a wide track record in the aerospace, automotive, general machinery, and related component industries, primarily in the United States, Europe, and Japan. 【Features】 - Highly effective when used in areas exceeding a carburizing depth of 3.0mm - Safe as it does not use solvents or harmful raw materials - Can be applied by brushing, dipping, or spraying - Eliminates the need for double coating, leading to time savings - Residue after heat treatment can be removed by shot blasting or brushing - Does not adversely affect the furnace environment *For more details, please refer to the PDF document or feel free to contact us.

Company：大阪化学研究所
Price：Other

Safety and consumables
Furnace

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Purification System "Cosmo Bio-G"

Thorough improvement of kitchen facility grease trap treatment with the power of bio! A purification system that takes the Earth's environment into consideration.

"Cosmo Bio-G" is a microbial product for sewage treatment that contains a diverse mix of pure cultures of beneficial microorganisms. Within the sewage tank, each beneficial microorganism becomes activated and produces various enzymes, rapidly breaking down organic matter (such as fats, proteins, and starch). Ultimately, organic matter is decomposed into water and carbon dioxide. 【Six Effects】 ■ Prevention of clogging in drainage pipes ■ Control of pests and harmful bacteria ■ Reduction of BOD and other pollutants ■ Mitigation of unpleasant odors ■ Cost reduction ■ Reduction of fats and oils *For more details, please refer to the PDF document or feel free to contact us.

Company：大蔵商事
Price：Other

others
Furnace

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Incinerator "MSK Type"

It is a small incinerator of the water-cooled jacket type, excellent in durability and energy-saving effects.

We offer a unique small incinerator model 'MSK type' with a double-door structure that allows for the addition of waste even during combustion. Thanks to Meisei's unique circulating technology, the combustion air inside the furnace is optimized, achieving high combustion efficiency, preventing the generation of black smoke, and significantly contributing to the reduction of running costs. 【Features】 ■ High combustion efficiency ■ Excellent durability ■ Capable of handling long materials ■ Suitable for heat utilization ■ Easy to operate, etc. *For more details, please download the PDF or feel free to contact us.

Company：明星金属製作所
Price：Other

Incinerators and chimneys
Furnace

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Powder Coating Troubleshooting: Poor Adhesion of Coating Film

Perform preprocessing properly! We also introduce measures to address issues caused by problems in the preprocessing stage!

This is a phenomenon where peeling occurs due to the coating film not being fully adhered to the substrate. We will introduce troubleshooting for "poor adhesion of the coating film." If insufficient curing of the coating film is the cause, measures can be taken by inspecting the curing oven and checking whether drying is being performed for the recommended time at a specific temperature. Additionally, there are measures for issues caused by excessive coating thickness during painting. 【Causes and Measures】 ■ Due to insufficient curing of the coating film → Inspect the curing oven and check whether drying is being performed for the recommended time at a specific temperature. ■ Due to issues in the pretreatment process → Properly perform pretreatment. ■ Due to excessive coating thickness during painting → Reconsider the painting method (painting time, discharge amount, working method, etc.). *For more details, please refer to the PDF document or feel free to contact us.

Company：川口化成品
Price：Other

paint
Furnace

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

The industrial furnace manufacturer will support you "to the fullest" until you are satisfied!

We provide total support from design, production, installation, maintenance, to after-sales follow-up.

San Furnace is an industrial furnace manufacturer that provides total support from design, manufacturing, installation, maintenance, to after-sales follow-up. We will work closely with you until you are completely satisfied, not only during installation but also afterwards! Since our designers also carry out the construction directly, you can trust us completely. By having our designers communicate directly with customers, we can easily reflect their opinions in the equipment, which many customers appreciate. We have received feedback from many customers saying, "It's easy to ask for help and I feel secure!" and "The usability has improved!" We sincerely and thoroughly consider our customers' needs. If you have any issues with industrial furnaces, please feel free to consult us at any time.

Company：サンファーネス
Price：Other

Incinerators and chimneys
Furnace

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Strand furnace (wire rod bright annealing furnace) capable of heat treatment for various types of wire rods.

A wire bright annealing furnace manufacturer that provides total support from design, production, installation, maintenance, to after-sales follow-up.

A wire rod bright annealing furnace is a heat treatment furnace that heats wire rods (the material for wire) coiled in a spiral shape while they are in an extended state, and heats them while winding (or cooling, etc.). At Sun Furnace, we specialize in continuous "wire rod bright annealing furnaces (strand furnaces)." We design the furnace structure to simplify heater replacement and regular maintenance tasks, allowing for smooth loading and unloading of annealing tubes into the furnace. By innovating the control panel program, it is also possible to reduce power costs and improve work efficiency. **Features of Sun Furnace's Wire Rod Bright Annealing Furnace** ■ Custom Design of Furnace Body and Annealing Tube We can flexibly accommodate all conditions, including the length and size of the furnace based on processing speed, wire diameter, and treatment conditions of the introduced gas, as well as the relationship with upstream and downstream equipment and the shape considering maintenance at the installation site. ■ Cost Reduction We can propose equipment that keeps running costs low during normal operation. The furnace will be constructed with an optimal structure that minimizes heat loss. Automatic temperature control and supply gas control are possible even during times when the furnace is not in use, such as weekends, leading to cost reduction. ■ Quality We select high-quality consumables such as heaters and thermocouples that can be used for a long time.

Company：サンファーネス
Price：Other

Incinerators and chimneys
Furnace

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Annealing furnace can uniformly heat treat the structure of steel materials and others.

With a "tempering furnace," it is possible to improve the properties of various materials by heat treating them at temperatures suited to the specific purpose.

The "annealing furnace" is a furnace that heats metal materials to soften them, holds them at that temperature, and then cools them slowly to remove residual stress and achieve uniform structure. If the processes of sintering or firing are incomplete, or if the thermal history is significantly affected by factors such as temperature and cooling speed during molding, material reuse, and ambient temperature, the hardness of the structure may become uneven, leading to machining irregularities. By softening the material through annealing treatment, it can exhibit its original material properties. Annealing is also known as "normalizing" or "anneal." 【Features】 ● Appropriate cooling control for rapid cooling, slow cooling, and over-aging is possible. ● Precise temperature distribution can be achieved. ● Various atmosphere gases can be introduced. 【Case Studies】 ■ Want to anneal copper without oxidation → "Vacuum Bright Annealing Furnace" ■ Want to fully anneal steel → "Pit Type Non-Oxidizing Annealing Furnace" ■ Want to anneal castings → "Trolley Type Annealing Furnace" ■ Want to anneal large parts of press products → "Trolley Type Annealing Furnace" / "Pit Type Annealing Furnace" ■ Want to anneal optical glass molded products → "Trolley Type Annealing Furnace"

Company：サンファーネス
Price：Other

Incinerators and chimneys
Furnace

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Vacuum furnace enables improvement of the working environment and heat treatment to suppress oxidation scale.

A "vacuum furnace" maintains luster and enhances the value of metal materials. Since post-processes such as pickling and degreasing are unnecessary, work efficiency improves, and energy-saving effects can be expected.

When heat treatment is performed in the atmosphere, steel reacts with oxygen, resulting in the formation of oxide scale on the surface, so it is used when one wants to avoid an oxidizing atmosphere. Performing heat treatment in a vacuum atmosphere allows for the degreasing and degassing of organic substances adhered to the surface of the metal material, resulting in a surface with the inherent luster of the metal material after treatment. 【Features】 ● It is possible to enhance the value of metal materials by maintaining their luster. ● Since subsequent processes such as acid cleaning and degreasing are unnecessary, work efficiency is improved. 【Case Studies】 ■ I want to anneal copper without oxidation → 'Vacuum Annealing Furnace' ■ I want to achieve a clean finish on the surface of the treated product → 'Vacuum Quenching Furnace' ■ I want to improve the wettability for brazing → 'Vacuum Brazing Furnace' ■ I want to improve the hot working environment around the furnace → 'Vacuum Furnace'

Company：サンファーネス
Price：Other

Incinerators and chimneys
Furnace

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Stainless steel heat treatment furnace - Enables heat treatment that brings out the characteristics of stainless steel materials.

We propose heat treatment for various wire materials and steel materials tailored to their respective purposes.

It is used for purposes such as removing distortion after welding, preventing deformation of processed products, removing surface oil, and solid solution treatment. Stainless steel is used in machine parts and buildings due to its excellent corrosion resistance and strength. 【Features】 ● Bright heat treatment of strip steel and wire rods is possible. ● We handle the "strand-type wire annealing furnace" for heat treating wire rods. ● Customization of temperature measurement settings and safety devices in industrial furnaces is also possible. 【Heat Treatment Methods by Stainless Steel Type】 ● Austenitic: Solution treatment, stabilization, stress relief, aging ● Ferritic: Annealing ● Martensitic: Annealing, tempering, hardening, tempering 【Case Studies】 ● Want to continuously heat treat strip materials → "Catenary-type bright annealing furnace" ● Want to perform annealing treatment while removing elements that negatively affect heat treatment → "Degreasing annealing furnace" ● Want to correct shape while performing annealing treatment → "Tension annealing furnace" ● Want to heat treat multiple wire rods at once → "Wire bright annealing furnace" If you have any concerns about stainless steel heat treatment, please feel free to consult us.

Company：サンファーネス
Price：Other

Incinerators and chimneys
Furnace

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Kiln

For heat treatment of oxide materials such as ceramics! You can freely adjust the temperature and time.

The "firing furnace" is a furnace that shapes and hardens powder by placing it in a mold and heating it, giving it a specific shape and strength. It is used for heat treatment of oxide materials such as ceramics. It can be configured to combine preheating, heating, and cooling zones into one unit. 【Features】 ■ Used for heat treatment of oxide materials such as ceramics ■ Customization options available for degreasing and adjusting the purity of atmosphere gases ■ Can integrate preheating, heating, and cooling zones into one unit ■ Temperature and time can be freely adjusted according to the type of material and heating conditions *For more details, please refer to the PDF document or feel free to contact us.

Company：サンファーネス
Price：Other

Incinerators and chimneys
Furnace

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Annealing furnace

By performing annealing, the arrangement of the structure returns to its original state, allowing it to be used as optical glass.

A "annealing furnace" is a furnace that heats metal materials, holds them at a certain temperature, and then cools them slowly to remove residual stress and achieve a uniform structure. By softening the metal materials and equalizing the variations during machining, the materials can exhibit their original properties. Glass is significantly affected by thermal history due to temperature variations during shaping and cooling speed, so annealing allows the arrangement of the structure to return to its original state, making it usable as optical glass. 【Features】 ■ Capable of appropriate cooling control such as rapid cooling, slow cooling, and over-aging ■ Capable of producing precise temperature distribution ■ Various atmospheric gases can be introduced *For more details, please refer to the PDF document or feel free to contact us.

Company：サンファーネス
Price：Other

Incinerators and chimneys
Furnace

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Non-ferrous metal heat treatment furnace

Precise temperature control is possible! Heat treatment can be performed with consideration for automation, energy saving, and safety.

The "non-ferrous metal heat treatment furnace" can accommodate various atmosphere gases. Non-ferrous metals refer to metals other than iron and iron-based alloys (steel). Non-ferrous metals require strict temperature control and oxygen concentration management. 【Features】 ■ Capable of accommodating various atmosphere gases ■ Precise temperature control is possible ■ Heat treatment considering automation, energy saving, and safety is achievable *For more details, please refer to the PDF document or feel free to contact us.

Company：サンファーネス
Price：Other

Incinerators and chimneys
Furnace

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Aluminum heat treatment furnace

Compatible with AMS standards (American Aerospace Heat Treatment Standards)! We handle batch continuous furnaces.

The "aluminum heat treatment furnace" can achieve a precise temperature distribution. Aluminum is a lightweight, strong, and corrosion-resistant metal with excellent properties such as good conductivity of electricity and heat. However, these properties can be enhanced through heat treatment. 【Features】 ■ Compliant with AMS standards (U.S. aerospace heat treatment standards) ■ Capable of achieving precise temperature distribution ■ Handling of batch continuous furnaces available *For more details, please refer to the PDF materials or feel free to contact us.

Company：サンファーネス
Price：Other

Incinerators and chimneys
Furnace

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Rotary kiln (rotating retort furnace)

Supports 100% hydrogen. Total support including front and rear equipment. We will solve the challenges of powder heat treatment together.

The rotary kiln (rotating retort furnace) can be used for the thermal treatment of powder materials. It dries and processes the powder materials uniformly by stirring them inside the rotating furnace core tube. In batch type, mixing, drying, and thermal treatment are processed continuously. San Furnace, as a top manufacturer of rotary kilns, handles everything from design and manufacturing to installation and maintenance consistently. 【Problem Solving】We have solved the following issues: ■ Want to use continuous type with 100% hydrogen but concerned about gas leaks. ■ Difficult to achieve continuous processing from powder input to discharge in batch type. ■ Large machines require preheating before operation due to the introduction of large amounts of gas. Please consult us for small lot production, thermal treatment tests, and small sample manufacturing. When processing powder materials, not only heating furnaces but also upstream and downstream equipment, including conveying devices, are necessary. At San Furnace, we provide total proposals that include not only the furnace but also upstream and downstream equipment through collaboration with partner companies. *For more details, please contact us or download the PDF.

Company：サンファーネス
Price：Other

Incinerators and chimneys
Furnace

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Strand furnace (wire rod bright annealing furnace)

Heat treatment of wire rods with different diameters is possible in a single furnace. It can also accommodate various shapes such as square, round, and oval.

At San Furnace, we specialize in continuous "strand furnaces (wire bright annealing furnaces)." We create furnace structures that simplify heater replacement and regular maintenance tasks, allowing for smooth loading and unloading of annealing tubes. 【Problem Solving】We have addressed the following challenges: ■ We want to easily clean and inspect the oxidized scale that accumulates inside the furnace. ■ We want to reduce the power costs of the furnace and improve work efficiency. ■ We want to simplify the replacement of annealing tubes. By innovating the control panel programs, it is also possible to reduce power costs and increase work efficiency. Please consult us for small lot production, heat treatment testing, and small sample manufacturing. *For more details, please contact us or download the PDF.

Company：サンファーネス
Price：Other

Incinerators and chimneys
Furnace

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Sintering furnace [Dedicated continuous furnace for MIM]

Continuous processing from degreasing to firing and sintering is possible.

We can continuously process from the debinding process to the firing and sintering processes. Additionally, automatic transport from the debinding process can also be designed. We will propose suitable equipment according to the customer's installation space and usability. 【Problem Solving】We have addressed the following issues: ■ It's a waste to dispose of hydrogen exhaust gas. ■ Temperature changes in the pusher furnace are done manually. ■ Speed switching was done with limit switches, but there were issues with switch misalignment. The "firing furnace and sintering furnace" can mass-produce high-precision parts and are used in the manufacturing of various mechanical components, including automotive parts. Please consult us for small lot production, heat treatment testing, and small sample manufacturing. *For more details, please contact us or download the PDF.

Company：サンファーネス
Price：Other

Incinerators and chimneys
Furnace

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Vacuum tempering furnace

In batch type processes, it is possible to quickly cool the treated material during the cooling phase after vacuum heating by introducing atmosphere gas into the furnace and using a heat exchanger.

A "vacuum furnace" maintains luster and enhances the value of metal materials. Since post-processing such as acid cleaning and degreasing is unnecessary, work efficiency increases, and energy-saving effects can be expected. When heat treatment is performed in a vacuum atmosphere, it facilitates the degreasing and degassing of organic substances adhered to the surface of metal materials, resulting in a surface that exhibits the inherent luster of the metal after processing. 【Features】 ■ It is possible to enhance the value of metal materials by maintaining their luster. ■ Work efficiency improves as post-processing such as acid cleaning and degreasing is no longer required. 【Examples of Products】 Common products made in a vacuum furnace ■ Bicycle gear ■ Fasteners ■ Bearings ■ Tools ■ Stainless steel gears ■ Orthodontic brackets ■ Chain components ■ Hinges for laptops 【Case Studies】 ■ Want to anneal copper without oxidation → "Vacuum Annealing Furnace" ■ Want to achieve a clean finish on processed items → "Vacuum Quenching Furnace" ■ Want to improve wettability for brazing → "Vacuum Brazing Furnace" ■ Want to improve the hot working environment around the furnace → "Vacuum Furnace" *For more details, please contact us or download the PDF.

Company：サンファーネス
Price：Other

Incinerators and chimneys
Furnace

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Aluminum heating furnace

It is possible to produce precise temperature distribution.

Aluminum is a lightweight, strong, and corrosion-resistant metal with excellent properties such as good conductivity of electricity and heat. Its characteristics can be enhanced through heat treatment. By performing thermal calculations and simulations during the design phase, it is possible to accurately control the temperature within the furnace, allowing for the desired quality and properties of the treated materials. 【Features】 ● Compliance with AMS standards (American aerospace heat treatment standards) is possible. ● Capable of producing precise temperature distributions. ● Handling of batch continuous furnaces is available. 【Main Aluminum Heat Treatment Furnaces】 ■ Pot-type aluminum solution aging furnace (T5, T6) ■ Roller hearth aluminum aging furnace (T5) ■ Tray-type aluminum solution aging furnace (T5, T6) ■ Tray pull-pusher type aluminum solution aging furnace (T5, T6) ■ Tray-type aluminum sand baking furnace If you have any new challenges or inquiries regarding energy conservation, automation, environmental considerations, or safety, please feel free to reach out.

Company：サンファーネス
Price：Other

Incinerators and chimneys
Furnace

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Stainless Steel Heat Treatment Furnace [Continuous Furnace]

With precise tension control technology, it is possible to manufacture heat treatment furnaces for stainless steel materials with a thickness of 3 μm.

Stainless steel is used in machine parts and buildings due to its excellent corrosion resistance and strength. At San Furnace, we provide total support from design, manufacturing, installation, to maintenance. Additionally, we select high-quality consumables such as heaters and thermocouples that can be used for a long time. 【Features】 ● Bright heat treatment of strip steel and wire rods is possible. ● We handle the "strand-type wire annealing furnace" for heat treating wire rods. ● Customization of temperature measurement settings and safety devices within industrial furnaces is also possible. 【Heat Treatment Methods by Stainless Steel Type】 ● Austenitic: Solution treatment, stabilization, stress relief, aging ● Ferritic: Annealing ● Martensitic: Annealing, tempering, hardening, tempering 【Main Stainless Steel Heat Treatment Furnaces】 ■ Bright Annealing Furnace ■ Tension Annealing Furnace ■ Stress Relief Furnace ■ Mesh Belt Annealing Furnace ■ Roller Hearth Annealing Furnace ■ Strand-type Bright Annealing Furnace If you have any concerns regarding stainless steel heat treatment, please feel free to consult us.

Company：サンファーネス
Price：Other

Incinerators and chimneys
Furnace

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Continuous strand furnace: Reducing power costs and improving work efficiency.

The timer function allows for flexible temperature control inside the furnace, and there is no waiting time for startup.

When the furnace equipment is not in operation during the weekend, it may be more cost-effective and better for equipment degradation to maintain a low temperature rather than completely shutting down the furnace. Depending on the combination of equipment in the control panel, it is possible to keep the temperature low over the weekend and automatically set the furnace to the desired operating temperature at the beginning of the week. 【Specifications】 ● Temperature: 1150℃ ● Effective dimensions: 20A×L2000×4 pieces ● Atmosphere: Hydrogen / Nitrogen ● Application: Annealing of various pipes ● Materials processed: Stainless steel / Brass pipes ● Processing capacity: 160kg/h ● Electrical capacity: 13kW 【Features of the Sun Furnace Wire Annealing Furnace】 ■ Custom design for furnace body and annealing tube It is possible to flexibly respond to the length and size of the furnace based on processing speed, wire diameter, and processing conditions of the introduced gas, as well as considering the maintenance shape of the furnace according to the relationship with upstream and downstream equipment and the installation location. ■ Cost reduction We can propose equipment that can reduce running costs during normal operation. ■ Quality We select high-quality consumables such as heaters and thermocouples that can be used for a long time. *For more details, please refer to the PDF document or feel free to contact us.

Company：サンファーネス
Price：Other

Incinerators and chimneys
Furnace

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Aluminum heat treatment furnace suitable for the aerospace industry.

The adoption of a rapid dissolution system makes it possible to meet AMS standards.

The applications of aluminum products are diverse and utilized in various areas. Depending on the product used, standards and specifications are established. With a design that considers the mechanism from heating to solution treatment, it has become possible to adapt to AMS standards (American Aerospace Standards). 【Specifications】 ● Temperature: Solution treatment 550℃, aging 105℃ ● Atmosphere: Air ● Applications: Solution treatment, aging ● Processed material: Aluminum structural products ● Processing capacity: 300kg/charge 【Other Implementation Examples】 ■ Want to anneal aluminum without oxidation → 'Roller Hearth Annealing Furnace' ■ Want to heat treat aluminum → 'Aluminum Solution Treatment Furnace (T4)', 'Aluminum Aging Furnace (T5)', 'Aluminum Solution Treatment Aging Furnace (T6)' ■ Want to bright anneal aluminum → 'DX Gas Generation Device' If you have any new challenges or inquiries regarding energy conservation, automation, environmental considerations, or safety, please feel free to reach out. * For more details, please refer to the PDF materials or feel free to contact us.

Company：サンファーネス
Price：Other

Incinerators and chimneys
Furnace

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Reheating furnace

It can be used either as a standalone annealing furnace or in combination with a quenching furnace.

After quenching, by performing vacuum replacement, it is possible to heat up without exposure to the atmosphere, which imparts toughness to the workpiece. Additionally, it achieves cost reduction through optimal gas control. 【Specifications】 ● Temperature: 150–650℃ ● Atmosphere: Air, Nitrogen ● Application: Tempering ● Material: Iron (Alloy Steel) ● Processing Capacity: 650 kg/h *For more details, please refer to the PDF document or feel free to contact us.

Company：サンファーネス
Price：Other

Incinerators and chimneys
Furnace

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Stainless steel heat treatment furnace capable of handling heat treatment of different plate thicknesses.

You can switch between thick and thin materials for heat treatment in a single furnace.

By making the rolls inside the muffle adjustable in height, it has become possible to set the roll position according to the thickness of the plates, allowing for the processing of both thick and thin plates with a single machine. Additionally, being able to process with just one machine has led to cost reductions. 【Specifications】 ● Temperature: 1150℃ ● Heating furnace length: 9500mm ● Cooling length: 4800mm ● Atmosphere: AX gas, nitrogen ● Applications: Lead frame materials, IT device exterior materials ● Processed materials: SUS304, 42Ni 【Main Applications】 Austenitic: Solution treatment / Stabilization / Stress relief / Aging Ferritic: Annealing Martensitic: Annealing / Tempering / Hardening / Tempering Annealing of metallic materials / Internal stress relief / Improvement of material properties * For more details, please refer to the PDF document or feel free to contact us.

Company：サンファーネス
Price：Other

Incinerators and chimneys
Furnace

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Crucible-type melting furnace

We will propose heat treatment suitable for each purpose for materials that require highly specialized processing.

Non-ferrous metals refer to metals other than iron and iron-based alloys (steel). Non-ferrous metals require strict temperature control and oxygen concentration management. At San Furnace, we can propose various heat treatment furnaces for different materials classified as "non-ferrous metals." 【Specifications】 ● Temperature: 1000–1200℃ ● Effective dimensions: Crucible capacity 110L ● Atmosphere: Air ● Application: Melting / Refining ● Processed material: Silver ● Processing amount: 900kg ● Electrical capacity: 60kW 【Other Case Studies】 ■ Want to anneal copper wire → 'Pot-type radiant annealing furnace' ■ Want to anneal phosphor bronze wire → 'Bell-type annealing furnace' 'Pot-type vacuum furnace' ■ Want to anneal pressed brass products → 'Bell-type vacuum annealing furnace' 'Pot-type vacuum furnace' ■ Want to anneal rolled molybdenum products → 'Roller hearth atmosphere annealing furnace' ■ Want to preheat magnesium alloy before melting → 'Preheating charging device' *For more details, please refer to the PDF document or feel free to contact us.

Company：サンファーネス
Price：Other

Incinerators and chimneys
Furnace

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Chain conveyor type vacuum tempering furnace

It can be used either as a standalone annealing furnace or in combination with a hardening furnace.

After quenching, by performing vacuum replacement, it is possible to heat up without exposure to the atmosphere, allowing the workpiece to have toughness. Additionally, it achieves cost reduction through optimal gas control. 【Specifications】 ● Temperature: 150–300℃ ● Atmosphere: Nitrogen, vacuum replacement ● Application: Tempering ● Material processed: Metal materials ● Processing amount: 30Kg/pallet, 7min/pallet *For more details, please refer to the PDF document or feel free to contact us.

Company：サンファーネス
Price：Other

Incinerators and chimneys
Furnace

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Furnace Product List and Ranking from 121 Manufacturers, Suppliers and Companies | IPROS

Furnace Manufacturer, Suppliers and Company Rankings

Furnace Product ranking