Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.
76～90 item / All 259 items
It is a non-contact (brushless) torque sensor.
Introducing the bent gauge type torque sensor. It is non-contact (brushless). We have a wide range of built-in amplifier torque sensors available.
Turbine Flow Meter FTB790 Series (Flow Sensor) with Display Turbine Flow Meter
Turbine Flow Meter FTB790 Series Turbine Flow Meter with Display Flow Sensor - Displays instantaneous and cumulative values - Maximum reading accuracy of 1% - 6-digit display - Signal output performance (selectable for manufacturing site) - Battery-operated (battery included) The FTB790 series turbine flow meter is a durable, compact, high-precision fluid measurement device that incorporates a microprocessor-based electronic unit to display cumulative and instantaneous values.
Accurate flow measurement for clean fluids, chemicals, and ultra-pure water!
The LEVIFLOW?LFS flow meter series is designed for high-precision flow measurement with minimal contamination and impact on fluids, suitable for high-purity chemicals and ultra-pure water. In particular, it achieves simple fluid control in combination with Levtronics' magnetic levitation bearing-less pumps. There are models with six flow ranges, two of which are suitable for high-temperature applications.
Ideal for measuring the flow of compressed air and gas! Ease of use is obvious at a glance!
The VA420 series is designed to be compact and is an economical type mass flow meter that can accommodate relatively small compressed air piping (minimum: 8A) in pneumatic systems. For relatively large compressed air piping from 50A to 300A, the VA400 series is more suitable. The gases that can be measured include not only air but also nitrogen, oxygen, CO2, and others. The VA420 series is an "inline type (integrated with piping)," while the VA400 series is a "vertical line insertion type." 【Specifications】 ○ Measurement items: m³/h, ℓ/min (1000 hPa, 20°C); however, compressed air and gas are measured in Nm³/h, Nℓ/min (1 atm, 0°C, normal) ○ Unit switching function via keypad operation: m³/h, m³/min, ℓ/min, ℓ/s, ft/min, cfm, m/s, kg/h, kg/min ○ Measurement principle: Thermal mass flow measurement (mass flow) ○ Sensors: Silicon chips x 2 ○ Measurement targets: Gases, air, and gas For more details, please contact us or download the catalog.
It is possible to measure the actual flow and calculate the accumulated flow value using a counter.
The VA400 series is a mass flow meter for compressed air and gas, capable of measuring flow rate (m³/h) and calculating cumulative flow values (m³) using a counter. It features a robust construction, and you can choose from versions with or without a display function. 【Specifications】 ○ Measurement items: m³/h, ℓ/min (1000 hPa, 20°C); however, for compressed air and gas, it is Nm³/h, Nℓ/min (1 atm, 0°C, normal) ○ Unit switching function via keypad: m³/h, m³/min, ℓ/min, ℓ/s, ft/min, cfm, m/s, kg/h, kg/min ○ Keypad functions: pipe diameter input, cumulative counter reset ○ Measurement principle: thermal mass flow measurement (mass flow) method ○ Sensors: silicon chips x 2 For more details, please contact us or download the catalog.
High pressure & large capacity airflow support! Oil-free air compressor for bottle molding.
Adopted by beverage manufacturers around the world! Uniquely designed high-pressure and large-capacity compressor. 【Features】 - Utilizes a uniquely designed Magnum valve, allowing for simple maintenance by just replacing the element, unlike conventional valves. - By using special materials, the replacement cycle for consumables has been extended to 16,000 hours (under stable conditions). - The longevity of parts contributes to a reduction in the frequency of regular maintenance and lowers running costs. - Achieved efficiency in compression capability through a unique four-stage compression, resulting in a 10-15% improvement compared to similar products from other companies (according to our research). - Minimized the number of local installation parts, contributing to a reduction in installation costs. - Complies not only with ASME but also with CE/PED and CRN Chinese standards. Service personnel are available in various regions around the world, enabling support for overseas projects. Proven track record with PET bottle molding equipment. No impact on product quality due to oil-free air. Please consider this when introducing equipment that requires large capacity and high pressure. *We also handle centrifugal type and small capacity reciprocating packages.
![[Rental] Handheld Mortar Flow Meter 'TMR-21'](https://image.www.ipros.com/public/product/image/6f4/2000939219/IPROS73756260416795142552.png?w=280&h=280)
Bright and easy-to-read recording section! The rear check function makes it easy to identify the cause of problems.
The "TMR-21" is a portable handheld mortar flow meter. The printing can be changed, and the zero (ZERO) volume is located on the front, making zero adjustment easy. The fluids that can be measured include mortar, cement milk, chemical injection solutions, water, and muddy water. 【Features】 ■ Convenient to carry as it is a handheld type ■ Bright and easy-to-read recording section ■ Easy zero adjustment due to the front location of the printing change and zero (ZERO) volume ■ The rear check function makes it easier to identify the cause of troubles *For more details, please refer to the PDF document or feel free to contact us.
Changing the print is easy! The check function is located at the back, making it easier to identify the cause of any issues.
The "TMR-21" is a handheld mortar flow meter that can be transported by regular vehicles and courier services. The recording section is bright, making it easy to read, and the keyboard is durable and easy to replace. Additionally, the check function is located at the back, making it easier to identify the cause of any issues. Furthermore, the foam calculator (optional) can be easily installed even after purchase. 【Features】 ■ Convenient portable handheld type ■ Can be transported by regular vehicles and courier services ■ Compact and space-saving ■ The carrying handle is made of metal and is sturdy ■ Bright and easy-to-read recording section *For more details, please refer to the PDF document or feel free to contact us.
Bidirectional measurement possible! Introducing products that can accurately measure flow rate, pressure, and temperature equipped with safety valves.
This product is a portable hydraulic tester that accurately measures flow rate, pressure, and temperature. It is suitable for performance checks of hydraulic pumps, motors, valves, and transmissions. It is equipped with a protective function through a safety valve, allowing for safe use. We offer a cost-effective standard model, the "DHT1 series," as well as the "DHM4 series," which enables data communication, and the "RFIK series," which is compatible with low flow rates. 【Features】 ■ Maximum flow rate: 800 l/min (DHT801, HT802, DHT802, DHM804) ■ Maximum pressure: 48MPa (DHT801, HT602, HT802, DHT602, DHT802, DHM804) ■ Bidirectional measurement (DHT1, HT2, DHT2, DHM4 series) ■ Equipped with a protective function through a safety valve *For more details, please refer to the PDF document or feel free to contact us.
Easy and compact installation! A flow meter that achieves reliable and accurate flow measurement.
The innovative TFA-type flowmeter from Spirelux Sarco is designed to economically measure steam flow in small diameter piping. It supports accurate energy management, reducing steam consumption and improving plant performance. It is designed based on steam flow velocity and can measure accurately even in low flow ranges. 【Features】 ○ No moving parts → Extends equipment lifespan ○ Economical → Compact and easy installation in small diameter piping ○ Designed for steam flow velocity → Accurate measurement even in low flow ranges ○ Improved management information → Enables accurate tracking of steam costs at usage points For more details, please contact us or download the catalog.
Valve and connection material SS316. Accuracy ±3%, temperature range -24°C to +54°C, among others.
Our company, which has extensive experience in handling overseas industrial products ranging from mechanical components to motors, offers the acrylic plastic flow meter 'FBC SERIES'. 【Specifications】 ■ Service: Gas or liquid ■ Wetted parts material: Body/Acrylic plastic, O-ring/NBR (standard) or Viton, Float/SS316, Glass, POM resin ■ Valve material: SS316 ■ Connection material: SS316 ■ Process connection: 1/8"NPT (female) ■ Pressure resistance: 150psig (10bar) at 100°F (38°C) ■ Temperature: -24℃ to +54℃ ■ Accuracy: ±3% (FS) ■ Installation: Vertical position ■ Weight: 0.12kg *For more details, please refer to the PDF document or feel free to contact us.
Valve and connection material SS316. Accuracy ±3% (FS), temperature range -10°C to +60°C, among others.
Our company, which has a wealth of experience in handling overseas industrial products ranging from mechanical components to motors, offers the plastic flow meter 'MBC SERIES'. 【Specifications】 ■ Service: Gas or liquid ■ Wetted materials: Body/Polycarbonate (PC) O-ring/NBR (standard), Float/SS316 or POM resin ■ Valve material: SS316 ■ Connection material: SS316 ■ Process connection: 1/8"NPT (female) ■ Pressure resistance: 150psig (10bar) 100°F (38°C) ■ Temperature: -10°C to +60°C ■ Accuracy: ±3% (FS) ■ Installation: Vertical position ■ Weight: 75kg *For more details, please refer to the PDF document or feel free to contact us.
Weather resistance: IP65, pressure resistance: 300 psig (20 bar) @ 100°F (38°C) and more.
The "SF200" is a plastic flow meter. It has weather resistance rated IP65. The weight is approximately 0.35 g (plastic). Our company has particularly strong connections in the Asian region. We are confident that we can assist companies considering overseas expansion or those looking to sell foreign products domestically. Please feel free to consult with us first. 【Specifications (excerpt)】 ■ Service: Liquid or oil ■ Process connection: 3/8", 1/2", 3/4" NPT (female) ■ Installation: Various flow directions, vertical and horizontal ■ Pressure resistance: 300 psig (20 bar) @ 100°F (38°C) ■ Temperature - With SS316 connection for PC main body tube: -5℃ to +80℃ - With SS316 connection for PSU main body tube: -5℃ to +110℃ *For more details, please refer to the PDF document or feel free to contact us.
Accuracy: +5% (FS), Pressure resistance: 1.2 MPa (12 kg/cm²), etc.
The "SF400" is a plastic flow meter. Our company has strong connections, especially in the Asian region. We are confident that we can assist companies considering overseas expansion or those looking to sell foreign products domestically. Please feel free to consult with us first. 【Specifications (excerpt)】 ■ Service: Liquid or oil ■ Process connection: 1/4" NPT or 2" NPT (female) ■ Installation: Vertical and horizontal; various flow directions ■ Accuracy: +5% (FS) ■ Pressure resistance: 1.2 MPa (12 kg/cm²) ■ Test pressure: 2.0 MPa (20 kg/cm²) (water at 25°C) ■ Temperature: PC body: -10°C to +60°C; PSU body: -10°C to +110°C *For more details, please refer to the PDF document or feel free to contact us.
Accuracy is +5% (FS)! Choose between "prototype" and "fixed type."
The "VF300 Series" is a plastic flow meter. This series includes the original model "VF-300-G" and the fixed type "VF-300-F." 【Specifications (excerpt)】 ■ Service: Water or air ■ Process connection: 3/8", 1/2", 3/4" NPT (female) ■ Installation: Vertical position ■ Pressure resistance: 1.2 MPa (12 kg/cm²) ■ Test pressure: 2.0 MPa (20 kg/cm²) (water at 25°C) ■ Temperature: PC body: -10°C to +60°C; PSU body: -10°C to +110°C ■ Accuracy: +5% (FS) *For more details, please refer to the PDF document or feel free to contact us.
