Construction method(frp) - List of Manufacturers, Suppliers, Companies and Products

Last Updated： Aggregation Period:Oct 22, 2025～Nov 18, 2025
This ranking is based on the number of page views on our site.

Construction method Product List

61～75 item / All 122 items

Displayed results
Water Treatment Facility (Wastewater Treatment Tank) Jickboard T Method

Water Treatment Facility (Wastewater Treatment Tank) Jickboard T Method

Introduction to the sheet lining method with high durability, which allows for easy construction and shortened construction periods.

This technology is a corrosion protection method for the inner surface of tanks that can be applied on wet surfaces or in high humidity conditions. After applying a special mortar to the concrete structure or after section repair, a jig board is pressed onto it immediately after application, achieving full adhesion with the concrete structure. This method eliminates the need for support materials, allowing for a shortened construction period. Additionally, FRP molded products are installed with a corrosion-resistant sealing material to create a double structure, providing high durability that prevents damage to the joint areas. 【Features】 ■ Can be applied on wet surfaces or in high humidity ■ Easy application reduces construction time ■ No need for support materials ■ The special mortar for adhesion can bond to wet surfaces of the concrete substrate *For more details, please refer to the PDF document or feel free to contact us.

  • Renovation and repair methods

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Anchor panel (ground anchor pressure plate)

Anchor panel (ground anchor pressure plate)

Pressure plates for ground anchors. Custom manufacturing is also possible based on the required load and area at the site. Compatible with various types of ground anchors.

This is a composite pressure-bearing plate that combines a grid-shaped panel made of FRP with a steel frame. It features a panel with an opening ratio of approximately 70%, ensuring high water permeability, making it suitable for sites where measures against groundwater are required. It is registered in the anchor construction design calculation system 'ANCHOR'. 【Water Permeability】 The grid-structured panel has a high opening ratio of approximately 70%, providing excellent water permeability. It ensures the water permeability of the ground even in sites where measures against groundwater are necessary. 【Greening】 The grid-structured panel has a high opening ratio of approximately 70%, making it excellent for greening. The grid sections contain vegetation substrates, creating a structure that is difficult for runoff to occur.

  • Slope protection material
  • Road construction
  • Erosion control works

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Non-stop water construction method "FDNS method"

Non-stop water construction method "FDNS method"

The replacement period for the water tank is 25 years! We recommend updating the construction!

The "FDNS method" is our original "non-stop water method" that allows for construction without water interruption during the renewal of existing water tanks. It is compatible with all manufacturers, including FRP, steel, and stainless steel panel tanks. Pipe and pulp renewal work can also proceed simultaneously. 【Benefits】 ■ Replacement construction utilizing the structure of the water tank ■ No water interruption during renewal work (switching time is minimized) ■ Shortened construction days and reduced costs ■ Bolt assembly type that does not use welding or open flames ■ No need for temporary water tanks or temporary pumps ■ Complies with new earthquake resistance standards *For more details, please download the PDF or feel free to contact us.

  • Water supply facilities
  • Renovation and repair methods

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Anti-corrosion coating and sheet lining method D type, Zickboard T method

Anti-corrosion coating and sheet lining method D type, Zickboard T method

Can be applied in wet surfaces and high humidity, easy to install, reducing construction time.

▼Overview The Zickboard T method involves applying an inorganic mortar to a concrete structure or after cross-section repair, and immediately pressing the Zickboard onto it to achieve full adhesion with the concrete structure. This method eliminates the need for support materials and allows for a shortened construction period. ▼Features - The joints of the Zickboard T method are constructed with FRP molded products installed with a corrosion-resistant sealing material, creating a double structure that provides durability to prevent damage at the joint areas. - The inorganic mortar used for adhering the Zickboard can bond to wet surfaces of the concrete substrate, making it suitable for construction in high humidity environments.

  • Sewerage facilities

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Pin Foundation Method: Example of construction in areas inaccessible to heavy machinery.

Pin Foundation Method: Example of construction in areas inaccessible to heavy machinery.

Simple foundation construction method for NETIS registration! Introducing examples of construction in areas where heavy machinery cannot enter.

Here is an example of the pin foundation method being implemented in a location inaccessible to heavy machinery. The materials used in this method are only anchor blocks and multiple pins. Both are lightweight, allowing for transportation to be done entirely by human power. Additionally, construction can be easily carried out using handheld electric tools, making it simple to install the foundation. 【Example】 ■ Sail Column Forest Botanical Garden (Fukuoka Prefecture) ■ Structure: 3.0m x 4.0m ■ Materials Used ・ Railing: Ipe wood ・ Floorboard: Ipe wood ・ Structural Material: FRP ■ Foundation Type: DP-S 【Other Examples】 ■ Nakagawa Town Andoku, Seta no Mizo (Fukuoka Prefecture) ■ Structure: Effective Width 2.0m Post Pitch 2.5m 【Materials Used】 　　Railing … Cedar wood 　　Floorboard … Cedar wood 　　Structural Material … Aluminum alloy 【Foundation Type】 　　DP-M For more details, please refer to the catalog or feel free to contact us.

  • Civil Engineering Method
  • Ground foundation construction method
  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Pipe lining method "SZ Lining"

Pipe lining method "SZ Lining"

Achieving the perfect lining for all types of pipes! SZ Method

Our diverse pipe lining technology provides optimal solutions tailored to various customer needs. The "SZ method" involves pulling an SZ liner into the sewer pipe using a manhole, expanding and heating the liner with air and steam to form a standalone pipe within the existing pipe. Even though SZ pipes are thin, they possess standalone pipe strength equal to or greater than that of rigid PVC pipes for sewer use. Furthermore, they excel in durability, oil resistance, and acid resistance, with a lifespan that is virtually permanent. 【Features】 ■ Formation of robust FRP pipes (standalone pipes) within existing pipes ■ Standalone pipe strength equal to or greater than that of rigid PVC pipes for sewer use ■ Flow capacity equal to or greater than that of new pipes ■ Excellent durability and chemical resistance *For more details, please refer to the PDF materials or feel free to contact us.

  • Pipeline Construction
  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Repair and Reinforcement Method: "Cross-Section Restoration and Surface Protection Repair Method"

Repair and Reinforcement Method: "Cross-Section Restoration and Surface Protection Repair Method"

We will aim to improve the durability of existing concrete structures.

The "Cross-Section Repair and Surface Protection Repair Method" is a technique that involves removing deteriorated areas of existing concrete structures and applying polymer cement mortar to restore the cross-section, thereby improving the durability of the existing concrete structures. In cases where the removal area of the existing concrete is extensive, repair and reinforcement materials such as FRP grids are placed on the surface of the concrete structure to ensure integration with the existing concrete. This method is applicable to concrete structures that have deteriorated due to salt damage, carbonation, freeze-thaw cycles, etc. 【Features】 ■ Improved durability ■ Increased compressive strength and adhesion strength ■ High filling capability ■ Enhanced rust prevention effect *For more details, please download the PDF or feel free to contact us.

  • Renovation and repair methods

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Instant curing coating method "Swael® Water Supply System"

Instant curing coating method "Swael® Water Supply System"

No foaming occurs due to humidity, and it hardens completely even at sub-zero temperatures (below -15°C).

The "Swael® Potable Water [Corrosion and Waterproofing] System" is a revolutionary instant curing coating system developed for corrosion and waterproofing of concrete structures for potable water, based on a two-component polyurea resin (product name: Swael) consisting of isocyanate and a special curing agent, and a spray technology that mixes and ejects these two components. The gel time after spraying is extremely short, just a few seconds, allowing for walking on horizontal surfaces after 30 seconds. Therefore, the curing time after construction can also be shortened. Additionally, due to the short gel time, it is easy to apply thick coatings continuously on ceiling and wall surfaces without sagging, allowing for quick and efficient construction. [Features] ■ Instant curing ■ Cures regardless of humidity and temperature ■ Improved efficiency with a mechanical construction system ■ Excellent workability on ceiling and wall surfaces *For more details, please download the PDF or feel free to contact us.

  • Special Construction Method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Standard lining method for pool interiors "Plascoat P"

Standard lining method for pool interiors "Plascoat P"

Water quality preservation lining! Samples of white, light blue, and aqua blue are available.

"Plus Coat P" is a product that excels in weather resistance and chemical resistance. Color samples are available in white, light blue, and aqua blue. We offer options for concrete and mortar pools as well as for FRP, aluminum, and stainless steel pools. Additionally, we also introduce the "Plus Coat P PEU-1 specification," which is part of the Ministry of Education, Culture, Sports, Science and Technology's standard specifications for architectural renovation work for pool interiors. 【Features】 ■ Epoxy + Acrylic Urethane ■ For water quality preservation lining ■ Standard type ■ Color samples are available in white, light blue, and aqua blue *For more details, please refer to the PDF materials or feel free to contact us.

  • 2022-07-13_16h24_54.png
  • 2022-07-13_16h25_05.png
  • 2022-07-13_16h25_15.png
  • Plastering and painting work

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Anti-corrosion coating and sheet lining method D type, Zickboard S method.

Anti-corrosion coating and sheet lining method D type, Zickboard S method.

Coating-type lining method + sheet lining method leads corrosion protection into a new era.

▼Overview The Zick Board S method involves applying a surface preparation material (Zick Resin HE104X) to the concrete structure, followed by the application of an odor-reducing epoxy resin (Zick Light E310 or Zick Light E410) to both the surface preparation area and the back of the Zick Board. The Zick Board is then adhered to the concrete structure immediately after application, creating a full adhesion. ▼Features - The joints of the Zick Board S method are designed with FRP molded products installed with a corrosion-resistant sealing material, creating a double structure that provides durability and prevents damage to the joint area. - As a hybrid structure that fully adheres the sheet lining method using a coating type lining method, it eliminates the need for support materials, allowing for a reduction in construction time.

  • Sewerage facilities

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Eco Bus Reform Comprehensive Catalog Vol. 3

Eco Bus Reform Comprehensive Catalog Vol. 3

Introducing "Eco Bus Reform," which allows for construction in a short period and significant cost reductions!

This catalog features the new construction method "Eco Bath Reform," which takes into consideration both the environment and people. It is ideal for hotel bathrooms, nursing facilities, public restrooms, and office interiors! In addition to introducing various construction methods such as "Nuri Reform" and "Panel Reform," we also present various repairs including "FRP Lining (crack repair)" and "Wall Rust Baseboard Repair (lower wall bulging)." "Eco Bath Reform" not only creates a comfortable living environment but also provides a clean and pleasant bathroom space at a low cost. Please feel free to download and take a look. [Contents] ■ Introduction of various construction methods ■ Various repairs ■ SET plan introduction/quotation request ■ Q&A, maintenance methods, inquiries ■ Company overview *For more details, please refer to the PDF document or feel free to contact us.

  • Renovation
  • Renovation Design

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Anti-corrosion coating and sheet lining method D type, Zicboard GR method.

Anti-corrosion coating and sheet lining method D type, Zicboard GR method.

Reduction of life cycle costs with a durability of 50 years.

▼Overview The Zick Board GR method has a construction track record of over 20 years, and based on follow-up survey results of operational facilities and promotion test results, it has been verified that even 50 years after completion, it can maintain the performance of "adhesion stability," "sulfuric acid resistance," and "barrier properties," ensuring a service life of 50 years. By having a service life of 50 years, it enables a reduction in lifecycle costs compared to coating-type lining methods and other sheet lining methods. ▼Features - The joints of the Zick Board GR method have a triple structure consisting of FRP molded products on the surface and back, along with corrosion-resistant sealing materials, providing excellent durability functions that prevent damage to the joint area due to stress concentration and other factors. - The Zick grout injected into the back of the Zick Board can also serve as a cross-section restoration process after the removal of deteriorated areas during renovation work.

  • Sewerage facilities

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Instant Hardening Coating Method "Swael Upper Water System"

Instant Hardening Coating Method "Swael Upper Water System"

The curing time after construction can also be shortened! Material management is easy, and uniform quality and film thickness management can be achieved.

We would like to introduce our instant curing coating method, the "Swael Drinking Water System." This revolutionary instant curing coating system is developed based on a spray technology that mixes and ejects two components: isocyanate and a special curing agent, which form a polyurea resin. It is designed for corrosion protection and waterproofing of concrete structures for drinking water. The use of a two-component high-pressure collision mixing spray machine has significantly reduced labor and dramatically improved construction efficiency. 【Technical Features】 ■ Instant curing ■ Cures regardless of humidity and temperature ■ Increased efficiency with a mechanical construction system ■ Excellent workability for ceilings and walls *For more details, please download the PDF or feel free to contact us.

  • Renovation and repair methods

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Repair and reinforcement method for structures: "Strand Sheet Method"

Repair and reinforcement method for structures: "Strand Sheet Method"

Introducing a groundbreaking method that fundamentally solves the problems associated with traditional continuous fiber sheet bonding techniques!

The "Strand Sheet Method" is a repair and reinforcement technique that processes FRP strands, which are impregnated and cured with resin, into sheet form and adheres them to the surfaces of concrete and steel structures using a specialized adhesive. The specialized adhesive also serves as a primer and leveling material. Since resin impregnation and degassing work are not required, sheets can be applied immediately after surface preparation, resulting in reduced construction time and lower costs. Strand sheets are available in a high-elasticity type with a lineup up to 900g/m2, providing greater reinforcement effects with a single layer compared to the toe sheet method. 【Features】 ■ Short construction time and low cost ■ Significant reinforcement effect ■ Simple and high quality ■ Good construction environment ■ The specialized adhesive is grease-like, preventing resin splatter and other issues *For more details, please refer to the PDF materials or feel free to contact us.

  • Renovation and repair methods

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Construction method

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.