Last Updated： Aggregation Period:Jun 24, 2026～Jul 21, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jun 24, 2026～Jul 21, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jun 24, 2026～Jul 21, 2026
This ranking is based on the number of page views on our site.
571～600 item / All 898 items
Crush concrete, remove paint film, clean dirt.
Water jet technology is a method that maximizes the power of water. It utilizes water by freely changing its "pressure," "flow rate," and "temperature" to harness it as a cleaning energy. Since it operates using only water without the use of chemical agents, it is gaining attention as an environmentally friendly method.
We have prepared a unique work vehicle that can precisely meet your needs.
Asile has independently developed a water jet method system that freely handles water under high temperature, high pressure, low pressure, and steam. We have packed the technology into 2-ton and 4-ton vehicles, preparing to rush to the site at any time. For more details, please download the catalog or contact us.
![[Construction Case] Ashire HJ&V (Hot Jet & Vacuum) Method](https://image.www.ipros.com/public/product/image/1e7/2000277346/IPROS3559786719072925698.JPG?w=280&h=280)
We will introduce a case where we successfully prevented the scattering of cleaning wastewater, which is a problem during high-pressure cleaning work.
We would like to introduce a case study where simultaneous collection of cleaning wastewater during high-pressure washing work on super high-rise condominiums, buildings, or rooftop waterproofing surfaces has become possible using the "HJ&V (Hot Jet & Vacuum) method." 【Case Study】 ■ High-pressure washing work on super high-rise condominiums and buildings ■ Challenge: Work above the 15th floor of super high-rise condominiums requires gondolas, and during cleaning, wastewater can scatter outside the gondola. ■ Improvement: - A vacuum device was installed inside the gondola, and a waste liquid hose was set up on the floor below the wall being cleaned. - High-pressure washing water is simultaneously collected within the surface and drained through the waste liquid hose to the drain on the lower floor. *For more details, please refer to the catalog or feel free to contact us.
We would like to introduce a method for removing deteriorated concrete that can be used for repair and reinforcement work, based on the ultra-high-pressure water jetting method.
We have accumulated a track record of removing deteriorated concrete that can only be achieved with ultra-high-pressure water jets. In order to strengthen structures and extend their lifespan, we will develop solutions that meet market needs in collaboration with everyone in the construction and design industries. We will provide information on our main construction methods and equipment in a three-page document.
![[Construction Example] Water Jet (WJ) Method - Asbestos Removal Method](https://image.www.ipros.com/public/product/image/308/2000096987/IPROS3390004491025885681.JPG?w=280&h=280)
Introducing a case study of the asbestos removal cleaning method utilizing water jet technology from the Tokyo branch of Nisshin Kiko.
This is a method for asbestos removal and cleaning using a water jet. ―― Process ―― 1. Manual surface stripping (large capacity areas) 2. Dust-free complete removal down to the substrate using WJ. 3. Complete recovery as wet dust. 4. Complete recovery and separation of wastewater. 5. Achieving process shortening while reducing the volume of discharged asbestos.
You can operate the machine by holding your hand over it without touching it, using "Drive" and "Stop."
Introducing the touchless ultrasonic cleaning machines 'WTC-600-40/WTC-1200-40' handled by Nisshin Kiko Co., Ltd. Equipped with photoelectric sensors and voice guidance in the control panel, it allows for easy operation without touching the switches with wet or dirty hands, following the voice instructions. It provides stable cleaning that is less affected by variations in liquid type and liquid depth. 【Features】 ■ Utilizes photoelectric sensors and voice guidance in the control panel ■ Can start and stop without contact ■ Easy operation following voice guidance ■ Available in two models: 600W and 1200W ■ Provides stable cleaning that is less affected by variations in liquid type and liquid depth *For more details, please refer to the PDF document or feel free to contact us.
SANEI Virtual Orbit
By using Virtual Orbit (a virtual trajectory based on mathematical formulas: 3D maps) downloaded to the vehicle via network distribution, drivers can see beyond their line of sight, which can be utilized for safety driving assistance in ITS and ADAS (Advanced Driver Assistance Systems) and for controlling CO2 emissions reduction. Additionally, it can be used for virtual test courses for vehicle development and experimentation in a short period, as well as for digitalizing the unevenness of real roads in the market into bench test data.
Shortening development time and reducing costs with the use of 3D maps! It is possible to have ultra-precise surface irregularities!
We propose a 3D road map for in-vehicle ECU development and bench testing using a vibration machine. This utilizes VirtualOrbit (virtual trajectory based on mathematical formulas: 3D map) and makes an innovative contribution to shortening development time and reducing costs. The greatest feature is that it can represent not only road curvature, longitudinal slope, and cross slope (cant) but also ultra-precise surface irregularities. 【Features】 ■ Utilizes VirtualOrbit (virtual trajectory based on mathematical formulas: 3D map) ■ Contributes to shortening development time and reducing costs ■ Can represent not only road curvature, longitudinal slope, and cross slope (cant) but also ultra-precise surface irregularities *For more details, please refer to the PDF document or feel free to contact us.
Introducing the mathematical virtual track for automotive electronic component (ECU) development and testing (HILS) applications!
San-Ei Giken conducts research and development of software, as well as contract computing services using electronic computers, and the design and manufacturing of various electronic devices. This document introduces mathematical virtual trajectories for automotive electronic component (ECU) development and testing (HILS) applications. [Contents (partial)] ■ Virtual test course for ECU development and testing ■ Driving simulation in the virtual test course ■ Used for bench testing ■ Utilized for CO2 emission reduction, power performance calculations, and various active controls ■ Overview of mobile measurement vehicle / MMS-Xv320ZL system *For more details, please refer to the PDF document or feel free to contact us.
Shaping the voices of users! We pursued wastewater collection performance that satisfies the diverse flooring.
The "EG Series" is a compact automatic floor cleaning machine that is "easier to understand," "user-friendly," and "safe to use." In addition to a wide forward view, it features a round top design that enhances visibility along walls. To allow for easy adjustments based on usage conditions, the switches are clearly arranged to eliminate waste. Additionally, a switch shape that can be felt in dark areas has been adopted. 【Features】 ■ Wide visibility ■ Easy-to-understand panel ■ Compatibility with new flooring ■ Lightweight operability ■ Improved water-saving while maintaining cleaning power *For more details, please refer to the PDF materials or feel free to contact us.
A container cleaning machine that achieves powerful cleaning performance and an ultra-compact design! With a processing capacity of approximately 100 to 600 pieces per hour, it is ideal for sites that require small to medium volume processing!
The "KY Series" is an ultra-compact container cleaning machine designed with a minimum size of 1870mm × 800mm, making it possible to install in narrow spaces. It demonstrates powerful cleaning capabilities without the need for pre-washing, thanks to the collaboration of a direct spray nozzle that removes stubborn residues and a wide-angle nozzle that washes away grease and dust. Furthermore, by introducing an optional U-turn conveyor, continuous operation by a single person becomes possible. 【Features】 ■ Ultra-compact design made possible by powerful cleaning capabilities ■ Compatible with a wide range of cleaning items, from plastic containers to metal containers ■ Continuous operation by a single person is possible with the introduction of a turn conveyor ■ Processing capacity of approximately 100 to 600 items per hour *For more details, please request a brochure or view the PDF data available for download.
It's okay to load with leftover food still on it! Powerful cleaning power + unique leftover processing system!
The "KDH Series" is a dishwasher equipped with food waste processing capabilities. By utilizing a unique direct-injection nozzle and wide-angle nozzle in the food waste processing tank, main washing tank, and rinsing, it demonstrates powerful cleaning performance. Furthermore, the unique food waste belt discharges waste outside the machine, keeping the interior always clean and hygienic. It is now also capable of handling large food waste. 【Features】 ■ Powerful cleaning performance ■ Unique food waste processing system ■ Clean and hygienic *For more details, please refer to the catalog or feel free to contact us.
No pre-washing required! We offer a wide variety of conveyor-type high-pressure dishwashers!
This catalog introduces the "High-Pressure Dishwasher" from KyoDo Co., Ltd., a specialized manufacturer of dishwashers and container washers. It features the "K Series," which is compact yet offers ultra-high pressure, as well as the "KDA Series," which can wash dishes with leftover food still on them, and the "KDH Series," which eliminates the need for manual dusting and reduces personnel requirements. [Featured Products] ■ K Series ■ KDA Series ■ KDH Series *For more details, please refer to the PDF document or feel free to contact us.
A cleaning machine that removes various stains with a direct injection nozzle and specialized detergent, as well as a lineup of dewatering devices that excel in quietness! Achieving a processing capacity of 400 sheets per hour!
This catalog introduces the "Container Washing and Drying Series" from KyoDo Co., Ltd., a specialized manufacturer of dishwashers and container washers. It features the ultra-compact container washer "KY Series," which can replace batch-type washers (with a processing capacity of about five times), as well as the centrifugal dehydrators "KSD Series" and "KCF Series," which utilize centrifugal force and do not require a heat source. [Contents (excerpt)] ■ Ultra-compact container washer ■ Centrifugal dehydrator ■ Straight-type container washer and dryer ■ U-turn type container washing and drying ■ U-turn type container washer, etc. *For more details, please refer to the PDF materials or feel free to contact us.
Can wash 1200 trays per hour! Cleans even the toughest dirt with high-pressure washing water.
Our "Tray Washing Machine" cleans even the toughest dirt with high-pressure washing water from a special nozzle. It can be used in a short time due to water drainage by a high-output blower. The American tray washing machine "TW-1200" can accommodate about 50 stacked trays, and the cleaned trays return to the operator in the specified number, allowing one person to operate it. Additionally, the sterilizing rinse section can use carbonated sodium hypochlorite, and it can wash 1,200 trays per hour. 【Features】 ■ High-pressure washing water from a special nozzle ■ Usable in a short time ■ Can accommodate about 50 stacked trays (TW-1200) ■ Carbonated sodium hypochlorite can be used in the sterilizing rinse section ■ Washes 1,200 trays per hour *For more details, please refer to the external link page or feel free to contact us.
Air cleaning device with a structure that prevents external leakage of dust removed by the air cleaning unit.
Our "Air Cleaning Device" performs internal air cleaning of caps transported horizontally at the mouth of the chute using pulse (intermittent) air. External air cleaning is conducted through the overall downflow of the device, the static elimination air from the ionizer, and the assist air for transportation. The entire device is set in a downflow environment, with air curtain zones established on both the upstream and downstream sides of the air cleaning zone, preventing the external outflow of dust removed in the air cleaning section. 【Features】 - Internal air cleaning is performed using pulse (intermittent) air. - External air cleaning is conducted through downflow, static elimination air from the ionizer, and assist air for transportation. *For more details, please refer to the external link page or feel free to contact us.
Excellent cleaning effect for washing from the sharp end to the blunt end of eggshells! Compatible with both parallel and perpendicular installation.
The "Dirty Egg Washing Device" is a revolutionary cleaning machine that gently and evenly washes eggs with a high-speed rotating brush while transporting them with a spiral brush. It provides excellent cleaning effectiveness by washing from the sharp end to the blunt end of the eggshell, with almost no broken eggs. There are types that can wash 2000 eggs per hour and 4000 eggs per hour. It can be installed parallel or perpendicular to the production line. 【Features】 ■ Cleans with a high-speed rotating brush while transporting with a spiral brush ■ Almost no broken eggs ■ Types that can wash 2000 eggs per hour and 4000 eggs per hour ■ Compatible with parallel and perpendicular installation to the production line *For more details, please refer to the external link page or feel free to contact us.
![[Case of Dishwasher and Grease Trap] Easier to remove dirt with daily use.](https://image.www.ipros.com/public/product/image/991/2000550996/IPROS39764562823758457083.png?w=280&h=280)
In an untreated state, scale was stuck, but after two months, the scale peeled off!
We will introduce a case where the dishwasher and grease trap become easier to clean with daily use. We applied 'Actraiser' to prevent and remove scale from the outside of the pipes without using chemicals or magnets. In the untreated state, scale was stuck, but after one month, the scale began to peel off, and after two months, the scale was completely removed. [Case Study] ■ Dishwasher ■ Grease Trap *For more details, please refer to the PDF document or feel free to contact us.
Possible to remove bio-film more effectively than pulsatile water jet. Qualified by human trial.
Toothbrush, pulsatile water jet, ultrasonic scaler, dental raser and oral rinse are used to wash bio-film or cavity accumulated on teeth or surface of implant. However, while they can remove macroscopic bio-film, they can not completely remove bio-film accumulated in narrow space on rough surface of tooth or dental implant. In the result, number of dental extraction from peri－implantitis or periodontal disease is not small. This invention provides the oral cleaning device which can remove bio-film by using cavitation jet.
This is a top-grade high-pressure cleaning vehicle. It has been designed to achieve excellent sound insulation and ease of use.
This is a high-pressure cleaning vehicle from "Shinsho," the leading comprehensive manufacturer of high-pressure cleaners in Japan. In recent years, in response to environmental concerns, we have adopted engines that emit fewer harmful substances such as HC and black smoke in order to improve the working environment, resulting in our designation as a construction machine with emission gas countermeasures. We have established and further developed our research and development, industrial system, sales, and after-sales service systems to meet the needs of various industries. We are actively advancing technical and business partnerships with overseas markets, including Europe, and are also focusing on the development of surrounding technologies. ● For more details, please contact us or download the catalog.
Easy operation of the pressure lever and pressure adjustment handle! Diesel-powered soundproof high-pressure washer.
At Shinsho Co., Ltd., which plans, develops, manufactures, sells, and provides after-sales service for high-pressure washers and cleaning device systems, we handle the "36ps Soundproof High-Pressure Washer." This product features energy-saving capabilities and is equipped with a slowdown device. It can also be loaded sideways onto a 2-ton truck. Additionally, the new pressure regulation device makes it easy to operate the discharge pressure lever and pressure adjustment handle. 【Features】 ■ Diesel specification ■ Front centralized control system ■ Energy-saving and slowdown device included ■ Can be loaded sideways onto a 2-ton truck ■ Easy operation of discharge pressure lever and pressure adjustment handle with the new pressure regulation device *For more details, please refer to the PDF document or feel free to contact us.
Peel, scrape, polish! The amazing water power! Introducing the hydraulic booster type.
The "Ultra Jetter" is a machine that removes weak points in concrete and substances that are strongly adhered using the powerful force of ultra-high-pressure water. The "Hydraulic Booster Type" is effective for tasks such as chipping away deteriorated concrete in bridge piers, erasing white lines on paved roads, roughening the substrate during tile installation, stripping paint from paint booths, and removing asbestos. 【Features】 ■ Powerful force of ultra-high-pressure water ■ Removes weak points in concrete and strongly adhered substances ■ Available in "Hydraulic Booster Type" and "Plunger Type" *For more details, please refer to the PDF materials or feel free to contact us.
Adopts a high-performance plunger pump! Supplies water using a suction pump directly connected to the water tank!
The "Ultra Jetter" is a machine that removes weak points in concrete and substances that are firmly adhered using the powerful force of ultra-high-pressure water. The "Plunger Type" features a high-performance plunger pump. Water supply is conducted through a suction pump connected directly to a water tank. 【Features】 ■ Powerful force of ultra-high-pressure water ■ Removes weak points in concrete and substances that are firmly adhered ■ Available in "Hydraulic Booster Type" and "Plunger Type" *For more details, please refer to the PDF document or feel free to contact us.
High-pressure cleaning while suctioning! A dual-purpose high-pressure cleaning vehicle that contributes to work efficiency.
The "High-Pressure Cleaning and Suction Vehicle Jet & Vacuum" is a high-pressure cleaning vehicle that performs both cleaning and suction functions, serving two purposes in one unit. By conducting high-pressure cleaning and suction operations simultaneously, it enables efficient work. Additionally, it features a rear concentration and easy operation. 【Features】 ■ Cleans while suctioning ■ Two functions in one unit ■ Work efficiency improvement ■ Collection tank made of SUS, 800L ■ Suction and discharge are switched via a valve *For more details, please refer to the PDF document or feel free to contact us.
Slowdown device, equipped with a low-emission engine! Low-noise high-pressure washing vehicle.
The "36ps Soundproof High-Pressure Cleaning Vehicle" is a low-noise high-pressure cleaning vehicle. It is equipped with an energy-saving and eco-friendly automatic operation (slowdown) that automatically increases engine speed only during work with high-pressure water. Additionally, it features a low-emission gas engine. 【Features】 ■ Low noise type ■ 1.5t chassis ■ Stainless steel water tank (350L) ■ Electric hose reel ■ 3-stage switchable throttle *For more details, please refer to the PDF document or feel free to contact us.
Equipped with two hydraulic drive forward/reverse hose reels! PTO soundproof high-pressure cleaning vehicle.
The "68・36ps PTO Soundproof High-Pressure Cleaning Vehicle" is a high-pressure cleaning vehicle equipped with three water intake ports that can be connected to a water supply vehicle. It features an energy-saving and eco-friendly automatic operation (slowdown) that automatically increases engine speed only during operation with high-pressure water. Additionally, it is equipped with two hydraulic-driven hose reels that can rotate in both directions. 【Features】 ■ 2t chassis ■ Stainless steel water tank (2000L) ■ Two hydraulic-driven hose reels that can rotate in both directions ■ Equipped with automatic operation (slowdown) ■ Three water intake ports that can be connected to a water supply vehicle *For more details, please refer to the PDF document or feel free to contact us.
Equipped with autonomous driving (slow down)! 3-ton chassis PTO high-pressure cleaning vehicle.
The "85・68ps PTO High-Pressure Cleaning Vehicle" is a high-pressure cleaning vehicle built on a 3-ton chassis. It is equipped with an energy-saving and eco-friendly automatic operation (slowdown) feature that automatically increases engine speed only during work with high-pressure water. Additionally, we offer options such as a swivel hose reel, a sidewalk-embedded ladder, and an automatic alignment winding device. 【Features】 ■ 3-ton chassis ■ Stainless steel water tank (2600L) ■ Maximum payload of 2500kg ■ Equipped with automatic operation (slowdown) ■ Options available *For more details, please refer to the PDF materials or feel free to contact us.
High-pressure washer equipped with an automatic stop device for oil depletion! Features a large 13L fuel tank.
The "5ps・7.5ps Soundproof High-Pressure Washer" is a high-pressure washer equipped with a large 13L fuel tank. It features an automatic air release system, eliminating the need for air release work when starting water intake. Additionally, it has an automatic stop device for low oil levels. 【Features】 ■ Equipped with a large 13L fuel tank ■ Includes an automatic stop device for low oil levels ■ Engine start can be done using both electric start and recoil (5ps has recoil only) ■ Energy-saving and slowdown device included (7.5ps) ■ Gasoline model: suitable for building maintenance, pipe cleaning, civil engineering, and painting *For more details, please refer to the PDF document or feel free to contact us.
Energy-saving, equipped with a slowdown device! A high-pressure washer with easy operation through front centralized control.
The "16.5ps・27ps Soundproof High-Pressure Washer" is a high-pressure washer equipped with a fuel-efficient diesel engine. With a large fuel tank, it can operate continuously for 5 hours at 16.5ps and 4 hours at 27ps. Additionally, you can select from three modes of operation—low, medium, and high—according to the required water volume. 【Features】 ■ Equipped with a fuel-efficient diesel engine ■ Energy-saving, with a slowdown device ■ Easy operation with front centralized control ■ Selection of low, medium, and high modes based on required water volume ■ Easy operation of discharge pressure lever and pressure adjustment handle with a new pressure regulation device ■ Diesel specifications: pipe cleaning, civil engineering, painting *For more details, please refer to the PDF document or feel free to contact us.
