Last Updated： Aggregation Period:Aug 13, 2025～Sep 09, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Aug 13, 2025～Sep 09, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Aug 13, 2025～Sep 09, 2025
This ranking is based on the number of page views on our site.
121～135 item / All 178 items
◆In a place without anchor points◆
Even in cases without a circular railing on the rooftop or openings, it can be installed by sandwiching it between the parapet (chest wall). The setup is easy, and the main unit weighs only 15 kilograms, making it easy to carry. *This is for swing work only. It cannot be set up on a gondola.*
Easy operation for secure fixation! Quick alignment and fine adjustment welding pipe high-speed clamp.
The "ISK-PC170E/ISK-PC320" is a high-speed clamp for welding pipes that features an exceptionally user-friendly attachment mechanism. When the feed switch lever is set to the fast feed side, it quickly and smoothly reaches the pipe. When the feed switch lever is set to the screw feed side, it tightens securely. We offer two models: the "ISK-PC170E" for pipes with a diameter of φ40 to 170mm, and the "ISK-PC320" for pipes with a diameter of φ110 to 320mm. 【Features】 ■ Easy operation for secure fixation ■ Simple centering and fine adjustments possible ■ Exceptionally user-friendly attachment mechanism ■ Gap gauge that allows for quick establishment of bevel gaps *For more details, please refer to the PDF materials or feel free to contact us.
Wide gripping width for suspending various blocks! Compatible with gripping widths from 150 to 550mm.
The "Block Vice FF Type" is a hand and machine-compatible concrete clamp designed for handling pedestrian and boundary blocks, as well as tombstones. The shackle position can be adjusted according to the gripping width, allowing for effortless operation with the lifting equipment. Additionally, four reinforced rubber narrow contact plates on each side, totaling eight, work uniquely to grip securely, eliminating concerns about falling, cracking, or scratching. 【Specifications】 ■ Rated capacity: 300kg ■ Weight: 20kg ■ Gripping width: 150–550mm ■ Adjustment holes: 4 ■ Shackle hole positions: 2 *For more details, please refer to the PDF document or feel free to contact us.
[Report Presentation] This explains the single pipe clamps necessary for constructing highly flexible scaffolding. 2023/11/24
If the type of scaffold is a frame scaffold, it can be assembled without using tools by preparing the specified materials. In the case of a wedge-type scaffold, the protrusions called "wedges" at both ends of the beam pipes are fitted into the "jacks" of the vertical posts and hammered in to secure the assembly. Both types of scaffolds are widely used on many construction sites because they can be easily assembled and disassembled. However, frame scaffolds and wedge-type scaffolds have standardized dimensions and are not suitable for use on complex-shaped land or in narrow spaces. When constructing a scaffold with high flexibility, a single-pipe scaffold is used. A single-pipe scaffold can be assembled with high flexibility by using a ratchet wrench or impact wrench in combination with single-pipe clamps and single-pipe pipes. Therefore, this time, we will explain the single-pipe clamps necessary for constructing a scaffold with high flexibility. *For more details, please download the PDF document.*
Eliminate the hassle of bending processing! It has high insulation properties and is resistant to gasoline and diesel.
The "Nylon Clamp" is shaped in a circular form, eliminating the need for bending processing. It complies with the RoHS directive. The color available is natural (milky white). Made of durable nylon, it has high insulation properties and is resistant to gasoline and diesel. We offer a wide range of packaging units, including "NK-2N" in a unit of 100, "NK-18N" in a unit of 50, and "NK-32N" in a unit of 25. 【Features】 ■ Shaped in a circular form, eliminating the need for bending processing ■ Made of durable nylon with high insulation properties ■ Resistant to gasoline and diesel ■ Complies with the RoHS directive ■ Color available is natural (milky white) *For more details, please refer to the PDF document or feel free to contact us.
RoHS directive compliant! The flexible arm structure allows for easy one-touch attachment and detachment without exerting force.
The "Push-Type Wiring Clamp" is a clamp that can be easily attached and detached with one touch without applying force, thanks to its flexible arm structure. It complies with the RoHS directive. We offer a wide range of products, including the "RMS series," "RLMS series," "RLWC series," and many others. 【Features】 ■ Easy one-touch attachment and detachment without applying force, thanks to the flexible arm structure ■ Extensive lineup ■ Complies with the RoHS directive *For more details, please refer to the PDF materials or feel free to contact us.
A diverse lineup of wiring clamps! Double-sided adhesive tape is of the heat-resistant type.
The "Wiring Clamp LWC/LWCN Series" comes with double-sided tape, allowing for easy attachment without the need for special processing on panels or chassis. A diverse lineup is available. The double-sided adhesive tape is of a heat-resistant type, and the release paper features an easy-to-peel dry edge processing, enhancing workability. 【Features】 ■ A diverse lineup is available ■ Double-sided adhesive tape is of a heat-resistant type ■ The release paper features an easy-to-peel dry edge processing, enhancing workability ■ Lot: 500 pieces ■ Delivery time: Approximately 45 days *For more details, please refer to the PDF document or feel free to contact us.
A welding separator trigger device that can be easily retracted!
The "1019" is a rebar clamp that allows for the flexible pulling of separators without direct welding to the rebar. It can also be used for foundation bases, floating formwork, step formwork, and other separator pulls. 【Features】 ■ Applicable rebar diameter: D10 to D19 welding separator pulling hardware ■ Separator welded to the back of the rebar clamp ■ Allows for flexible pulling of the separator without direct welding to the rebar *For more details, please download the PDF or feel free to contact us.
A lineup of products that achieve high reproducibility of fixed positions, such as clamps that allow the lever position to be set freely at 360°.
We offer the "VEKTEK Hydraulic Clamps," which excel in ease of installation and maintenance. Our lineup includes the "TuffLink 360° Link Clamp," which allows for 360° adjustable lever positioning, and the "Swing Clamp," which achieves high reproducibility and durability through three cams, making arm changes easy with its clocking feature. Additionally, we provide "Work Supports" that can hold workpieces without causing damage. 【Features】 ◎ TuffLink 360° Link Clamp ■ Equipped with a patented rotating lug function ■ Available in five types: 2.4KN, 4.0KN, 6.1KN, 10.3KN, and 16.0KN ◎ Swing Clamp ■ Reproducibility of clamp position ±0.25°, reproducibility of swing angle 90° ±3° ■ Swing angles can be selected from four options: 30°, 45°, 60°, and 90° ◎ 7MPa and 35MPa Work Supports ■ Three types: spring type, air type, and hydraulic type (air type available only for 35MPa) ■ High reproducibility: positions can be reproduced with an accuracy of ±0.005mm *For more details, please refer to the materials. Feel free to contact us with any inquiries.
There are two types: a general-purpose type (LT series) and a type that clamps to the mold U-cut section (MT series).
■DynaTech Clamp LT/MT■ 1. LT Series (4 models: Clamping capacity 9.8-61.7 kN) This is a general-purpose type for fixing the mold base plate surface. - Powerful lever type - Custom-made to fit the thickness of the mold and T-slot dimensions - Hydraulic On: Clamp, Hydraulic Off: Unclamp 2. MT Series (4 models: Clamping capacity 9.8-61.7 kN) This type clamps onto the U-cut section of the mold. - Powerful cylinder type - Custom-made to fit the thickness of the mold and T-slot dimensions - Hydraulic On: Clamp, Hydraulic Off: Unclamp 【Mold Exchange】Please also use the DynaTech hydraulic unit and various die lifters, air cushion mold exchange carts, and other series products. DynaTech Mold Exchange Series ■DynaTech Clamp LT/MT ■DynaTech Hydraulic Unit MX ■DynaTech Detachable Roller FR ■DynaTech Air Cushion Mold Exchange Cart ■DynaTech Spring Roller NR ■DynaTech Spring Die Lifter DL ■DynaTech Solid Roller RS ■DynaTech Solid Ball BLS ■DynaTech Hydraulic Die Lifter DF
A rich lineup of products from Super Tool Co., Ltd., including clamps!
This catalog is the product catalog "Toggle Clamp & Clamp" of Super Tool Co., Ltd., which manufactures and sells tools such as wrenches, spanners, pliers, and jigs through trading companies and exports them. It features a wide range of products, including the pipe welding outer clamp "Bridge," which anyone can easily install, and various welding multi-clamps that are convenient for simple pipe fixing and alignment. [Contents] ■ Clamps ■ Pliers ■ Vises ■ Setters ■ Toggle Clamps *For more details, please download the PDF or contact us.
Most models use stainless steel for the support pins! Designed for long-term use.
We would like to introduce the "Toggle Clamp" handled by Super Tool. It is suitable for inspection jigs, welding jigs, other assembly jigs, and processing jigs. We offer a lineup of downward clamping types (horizontal handle type and vertical handle type), side clamping types, push-pull types, and dedicated stop types. Additionally, most models use stainless steel for the support pins, ensuring durability for long-term use. 【Features】 - Lineup of downward clamping types (horizontal handle type and vertical handle type), side clamping types, push-pull types, and dedicated stop types - Suitable for inspection jigs, welding jigs, other assembly jigs, and processing jigs - Most models use stainless steel for the support pins - Designed for long-term use *For more details, please refer to the PDF document or feel free to contact us.
We offer a variety of clamps, including cam-type, pad-type, and hand machine types!
We would like to introduce the "Suspension Clamps for Concrete Secondary Products" handled by Super Tool. Our lineup includes "Cam-type and Pad-type Suspension Clamps for Concrete Secondary Products," as well as "Clamps for Laying Concrete Secondary Products" and "U-shaped Trench Suspension Clamps with Inner Lining." Based on our philosophy of considering various environments and pursuing ease of use and safety, we will continue to develop products that meet the diverse needs of our customers. 【Partial Lineup】 ■ Suspension Clamps for Concrete Secondary Products (Cam-type) ■ Suspension Clamps for Concrete Secondary Products (Pad-type) ■ Suspension Clamps for Concrete Secondary Products (Hand & Machine Type) ■ Universal Suspension Clamps for Concrete Secondary Products ■ Balance (with upper wire rope and adjustable capacity ring) *For more details, please refer to the PDF document or feel free to contact us.
A wide variety of housing lifting clamps, including formwork and panel lifting clamps, as well as panel and beam lifting clamps, are available!
We would like to introduce our range of "Suspension Clamps for Housing." Starting with the "Formwork and Panel Suspension Clamp," which is ideal for lifting formwork and wooden panels, we also offer the ultra-lightweight and compact "Panel Suspension Clamp PAT." and the wide-type "Panel and Beam Suspension Clamp," among many others. In addition, we have "Two-Point Suspension Balances" and "Sling Belts for Balances" available as well. 【Product Lineup】 ■ Formwork and Panel Suspension Clamp ■ Panel Suspension Clamp PAT. ■ Panel and Beam Suspension Clamp (Wide Type) ■ 2x4 Panel Suspension Clamp ■ Panel and Beam Suspension Clamp (Super Wide Type) *For more details, please refer to the PDF document or feel free to contact us.
