Last Updated： Aggregation Period:Feb 04, 2026～Mar 03, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Feb 04, 2026～Mar 03, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Feb 04, 2026～Mar 03, 2026
This ranking is based on the number of page views on our site.
1～30 item / All 85 items
Design and manufacture of local exhaust systems, free shape design, short delivery time.
We will undertake the exhaust air volume calculation based on necessary regulations such as the Organic Law and the Specialization Law, as well as the duct piping construction for local exhaust systems.
![[Case Study] We provide comprehensive construction from explosion-proof rooms to exhaust systems!](https://image.www.ipros.com/public/product/image/eac/2000196899/IPROS3098365119129389328.jpg?w=280&h=280)
We will carry out the entire construction from the explosion-proof room to the exhaust system!
While the cleaning process for base pharmaceuticals is expanding beyond the initial plan, the exhaust equipment, such as ventilation fans, is insufficient. Therefore, there has been a request to partition the work space and introduce suitable working conditions and ventilation equipment. Issues: 1. The exhaust system is not fully effective, which may allow the odors from the chemicals used to spread to other processes, worsening the working environment. 2. The usage exceeds fire safety regulations, necessitating explosion-proof measures. 3. To avoid deteriorating work efficiency, a large enclosure is desired.
![[Case] Improving the yield of the spray drying process and sharpening the particle size distribution.](https://image.www.ipros.com/public/product/image/20b/2000602652/IPROS64518123009764256691.png?w=280&h=280)
Introduction of cases that solved issues such as "the particle size distribution is broad"!
The ceramic processing manufacturer uses a spray dryer in the granulation process of fine ceramics and has been using a hose pump to supply liquid to the spray dryer. However, there have been challenges such as "although an air chamber is attached to the piping, pulsation cannot be completely eliminated, resulting in unstable liquid supply and a broad particle size distribution." For solutions to these challenges and requests, please download and view the PDF materials. 【Customer's Challenges and Requests】 ■ Although an air chamber is attached to the piping, pulsation cannot be completely eliminated, resulting in unstable liquid supply and a broad particle size distribution. ■ Concentration variations caused by the retention of the original liquid in the air chamber are also negatively affecting the particle size distribution. ■ As a result of the broad particle size distribution, the number of particles removed during the classification process has increased, leading to reduced yield. *For more details, please refer to the PDF materials or feel free to contact us.
An anaerobic workstation equipped with a culture chamber that allows for hand insertion. Suitable for research and development of health foods, supplements, and pharmaceuticals, including intestinal bacteria.
**Main Features** ■ Sleeve cuff system enabling delicate work The highly elastic latex cuffs fit snugly around the arms, allowing direct insertion into the chamber, significantly improving work precision and efficiency. ■ Oxygen removal in the sleeve before work begins At the start of work, any remaining oxygen in the sleeve is extracted using a foot pedal to ensure anaerobic conditions. ■ Palladium catalyst cartridge that removes even trace amounts of oxygen Any trace oxygen that enters at the start of work is processed through condensation control by reacting with hydrogen in the chamber and palladium to form water vapor. ■ Arm port door ensuring chamber sealing A door that seals the arm port from the inside of the chamber is included for when work is paused. The door has an O-ring that fits tightly against the opening, allowing for the maintenance of anaerobic conditions. ■ Separate culture chamber creating a comfortable workspace The culture chamber, which can be stored at temperatures ranging from room temperature +5°C to 70°C, is separated by a door. This prevents the temperature of the workspace from rising, allowing for comfortable work and stable culture conditions. ■ Airlock allowing safe and ample entry A spacious airlock that can quickly achieve anaerobic conditions via the control panel enables the safe and ample entry of samples and supplies.
Can be inserted by hand into the chamber. An anaerobic chamber that enables efficient research work on intestinal bacteria and more. An economy model of the Bactron series.
■ Sleeve cuff system that enables delicate work The highly elastic latex cuffs fit snugly around the arms. This allows the arms to be directly inserted into the chamber, dramatically improving work precision and efficiency. ■ Oxygen in the sleeve is removed before work begins At the start of work, any remaining oxygen in the sleeve is extracted using a foot pedal to ensure anaerobic conditions. ■ Palladium catalyst cartridge that removes even trace amounts of oxygen Any trace oxygen that enters at the start of work is processed through condensation control by reacting with hydrogen in the chamber and palladium to form water vapor. ■ Arm port door that ensures chamber sealing A door is included that seals the arm port from the inside of the chamber during work pauses. The door has an O-ring that fits tightly against the opening, allowing for the maintenance of anaerobic conditions. ■ Separate culture chamber that creates a comfortable working space The culture chamber, which can be stored at temperatures from room temperature +5°C to 70°C, is separated by a door. This prevents the temperature of the working space from rising, allowing for comfortable work and stable culture. ■ Airlock that allows for safe and large-scale entry There is a spacious airlock that can quickly achieve anaerobic conditions via the control panel, enabling the safe and large-scale entry of samples and supplies.
Can be inserted by hand into the chamber. An anaerobic chamber that enables efficient research work on intestinal bacteria and more. A high-end model of the Bactron series.
■ Sleeve cuff system enabling delicate work The highly elastic latex cuffs fit snugly around the arms. This allows the arms to be placed directly into the chamber, significantly improving work precision and efficiency. ■ Oxygen in the sleeve is removed before work begins At the start of work, any remaining oxygen in the sleeve is extracted using a foot pedal to ensure anaerobic conditions. ■ Palladium catalyst cartridge that removes even trace amounts of oxygen Any trace oxygen that enters at the start of work is processed through a condensation control function by reacting with hydrogen and palladium in the chamber to form water vapor. ■ Arm port door ensuring chamber sealing A door is included that seals the arm port from the inside of the chamber during work pauses. The door has an O-ring that tightly fits the opening, allowing for the maintenance of anaerobic conditions. ■ Separate culture chamber creating a comfortable workspace The culture chamber, which can be stored at temperatures ranging from room temperature +5°C to 70°C, is separated by a door. This prevents the temperature of the workspace from rising, allowing for comfortable work and stable culturing. ■ Airlock allowing for safe and ample entry A spacious airlock that can quickly achieve anaerobic conditions via the control panel allows for the safe and ample entry of samples and supplies.
Aiming to create a comfortable environment! The foundation of industry starts with clean air!
San Ki Keisou Co., Ltd. has been providing special air conditioning systems focused on clean environments for industrial sectors and environmental control systems that support the healthy growth of agricultural and livestock products to many customers, with the aim of creating optimal environments. In the Thermal Clean System business, we contribute to production, research, and storage in various industries centered around our registered trademark technology, "Thermal Clean." We also accept orders for the manufacturing and sales of various equipment related to constant temperature and humidity rooms and clean facilities, as well as custom products. 【Business Activities】 ■ Biotechnology System Business ■ Thermal Clean System Business *For more details, please refer to the PDF materials or feel free to contact us.
It is a vacuum chamber unit for fluorescent X-ray analysis.
It is for the vacuum chamber unit dedicated to the "OURSTEX100FA" model.
Heating, melting, stirring, casting, and extraction at high speed!!
The chamber body is made entirely of aluminum, making it resistant to electromagnetic induction effects, and features a compact and lightweight design. By integrating it with induction heating devices and peripheral equipment on a frame, it becomes a user-friendly compact all-in-one device. 【Features】 ○ Quick heating, melting, stirring, casting, and extraction For more details, please contact us or download the catalog.
It is a mixing chamber for mixing two types of gas. It is used for gas mixing in combination with Bronkhorst's mass flow controller.
This is a gas mixing chamber that can be used to generate mixed gases using Bronkhorst mass flow controllers. There are two models available with inlet and outlet fittings of 1/4" OD and 6 mm OD. A 1/8" tube for low flow creates turbulence, enabling gas mixing.
![Explosion-proof stainless steel draft chamber [Custom case]](https://image.www.ipros.com/public/product/image/f08/2000419052/IPROS7661111136339614887.png?w=280&h=280)
We accept fully custom-made orders. We provide products made from materials such as stainless steel and PVC, tailored to your needs.
● This is a stainless steel draft chamber with excellent corrosion resistance, organic solvent resistance, and heat resistance. ● It is also possible to incorporate dry air and nitrogen gas piping, as well as leak detectors. ● By consolidating the control panel at the front, it takes work efficiency and safety into consideration.
![Stainless Steel Draft Chamber [Custom Case]](https://image.www.ipros.com/public/product/image/07d/2000419054/IPROS15217530336849464138.png?w=280&h=280)
We accept fully customized orders. We provide products made from materials such as stainless steel and PVC, tailored to your needs.
● This is a stainless steel draft chamber with excellent resistance to corrosion, organic solvents, and heat. ● It is also possible to incorporate dry air and nitrogen gas piping, as well as leak detectors. ● By consolidating the control panel at the front, it takes work efficiency and safety into consideration.
Functions that enhance safety, comfort, and economy have come to fruition!
The "Tad Chamber" is a new concept draft chamber that enhances the safety and comfort of operators by preventing the leakage of toxic gases with low air volume, in addition to the push air supplied from conventional side panels and the front working area, by also providing support air from slits with a double-structured balance door. In addition to safety provided by multi-support air, it is equipped with features that enhance efficiency and cost-effectiveness on site, such as a touch-operated control panel, bright and easy-to-see LED lighting, and airflow adjustment functions. Moreover, since air does not directly hit the operator, comfortable work can be performed. 【Features】 ■ Outstanding comfort ■ High safety ■ Excellent cost-effectiveness *For more details, please refer to the catalog or feel free to contact us.
We can accommodate short delivery times and low costs! Custom specifications tailored to your request for experiments involving organic solvents and other flammable and explosive gases.
Our company manufactures draft chambers that enhance the safety and comfort of operators. They can be custom-made, allowing you to freely create the main unit according to your requirements! Since we have in-house production, we can deliver in a short time and at a low cost. 【Features】 ■ Custom-made ・・・ Made to order, so any request is welcome. It is also possible to have the entire exterior and interior made of stainless steel (SUS304). ■ In-house production ・・・ All processes from development to assembly, installation, and construction are carried out in-house, enabling short delivery times and low costs. ■ Small-batch production ・・・ As a small factory, we have many years of experience as a manufacturer. *For more details, please refer to our catalog or feel free to contact us.
Introducing the combination sash type draft chamber manufactured by Tada Seisakusho!
The "Combination Sash Type DFK" is a draft chamber manufactured by Tada Seisakusho. It is a type that has sliding glass installed in the sash. During experiments, it allows for partial opening without having to open the entire sash, which helps reduce unnecessary airflow changes. 【Features】 ■ Type with sliding glass installed ■ Can be used by opening only a part without opening the entire sash ■ Reduces unnecessary airflow changes ■ Touch-operated control panel (optional) *For more details, please refer to the PDF document or feel free to contact us.
Introducing the low working surface type draft chamber manufactured by Tada Seisakusho!
The "Low Work Surface Type DFL Model" is a draft chamber manufactured by Tada Seisakusho. It is a type with a lower work surface compared to the standard draft chamber. This design makes it easier to install and integrate large experimental equipment. 【Features】 ■ A type with a lower work surface compared to the standard draft chamber ■ Easier installation and integration of large experimental equipment ■ Touch panel operation (optional) *For more details, please refer to the PDF document or feel free to contact us.
Introducing the overhead type draft chamber with wet scrubber manufactured by Tada Seisakusho!
The "Wet-Type Scrubber Overhead Model DF-HW" is a draft chamber manufactured by Tada Seisakusho. This model features a wet scrubber cleaning tower installed on top of the standard type, with a circulation pump and cleaning solution tank stored inside the lower unit, requiring minimal installation space. It absorbs, neutralizes, and removes primarily chemically hazardous gases generated within the hood before exhausting them outdoors, thereby reducing the impact on the environment surrounding the laboratory building. Since the operation management of the wet scrubber can be done within the draft chamber, it is convenient for safety management. 【Features】 ■ Wet scrubber cleaning tower installed on top of the standard type ■ Type with circulation pump and cleaning solution tank stored inside the lower unit ■ Space-saving ■ Absorbs, neutralizes, and removes chemically hazardous gases before exhausting them outdoors ■ Reduces the impact on the environment surrounding the laboratory building *For more details, please refer to the PDF document or feel free to contact us.
Introducing the overhead type draft chamber with a dry scrubber manufactured by Tada Seisakusho!
The "Dry Type Scrubber Overhead Type DF-HD" is a draft chamber manufactured by Tada Seisakusho. It is a type that has a dry scrubber installed on the top surface of the standard type. It adsorbs and removes harmful gases, primarily organic solvents generated inside the hood, with activated carbon before exhausting them outdoors, thereby reducing the impact on the environment around the laboratory building. The operation management of the dry scrubber can be done within the draft chamber, making it convenient for safety management. 【Features】 ■ A type that has a dry scrubber installed on the top surface of the standard type ■ Adsorbs and removes harmful gases with activated carbon before exhausting them outdoors ■ Reduces the impact on the environment around the laboratory building ■ Convenient for safety management ■ Touch panel operation (optional) *For more details, please refer to the PDF document or feel free to contact us.
Introducing a walk-in type draft chamber that can accommodate large experimental equipment and devices. It smoothly exhausts gases generated on the floor!
The "Walk-in Type DFW Model" is a draft chamber manufactured by Tada Seisakusho. The interior of the draft chamber has sufficient effective height from the floor, making it easy to assemble large devices and equipment inside the hood or to move externally assembled equipment into the hood. Thanks to its unique airflow design, gases generated at the floor are smoothly exhausted. Custom designs are available to meet specific requirements, including all stainless steel or explosion-proof specifications. 【Features】 ■ The interior of the draft chamber has sufficient effective height from the floor. ■ Easy assembly of large devices and equipment inside the hood. ■ Easy to move externally assembled equipment into the hood. ■ Gases generated at the floor are smoothly exhausted. ■ Touch panel operation (optional). *For more details, please refer to the PDF document or feel free to contact us.
Introducing the interior stainless steel draft chamber manufactured by Tada Seisakusho!
The "Interior Stainless Steel Type DF-IS Model" is a draft chamber manufactured by Tada Seisakusho. The main body is made of steel, and the exterior is finished with chemical-resistant baked paint. The interior is entirely made of stainless steel (SUS304), and the work surface is flat, making it suitable for experiments using organic solvents. It is also possible to have the work surface in a tank style. 【Features】 ■ The main body is made of steel ■ The exterior is finished with chemical-resistant baked paint ■ The interior is entirely made of stainless steel (SUS304) ■ Suitable for experiments using organic solvents ■ The work surface can also be made in a tank style ■ Touch panel operation (optional) *For more details, please refer to the PDF materials or feel free to contact us.
Introducing the all-stainless steel draft chamber manufactured by Tada Seisakusho!
The "All Stainless Steel Type DF-AS Model" is a draft chamber manufactured by Tada Seisakusho. Both the exterior and interior of the draft chamber are made entirely of stainless steel (SUS304). It is highly durable and suitable for experiments using organic solvents. The water supply and gas supply are designed for remote operation from the outside, considering safety during use. It is also possible to manufacture explosion-proof models. 【Features】 ■ Entirely made of stainless steel (SUS304) for both exterior and interior ■ Highly durable ■ Suitable for experiments using organic solvents ■ Water and gas supply operated remotely from the outside ■ Explosion-proof models can also be manufactured ■ Touch panel operation (optional) *For more details, please refer to the PDF document or feel free to contact us.
Introducing the tabletop draft chamber manufactured by Tada Seisakusho!
The "Tabletop Type DFT Model" is a draft chamber manufactured by Tada Seisakusho. It is a type that can be installed on the tabletop of a laboratory bench. Since it has the same design as the standard type, it has equivalent exhaust performance. 【Features】 ■ Type that can be installed on the tabletop of a laboratory bench ■ Same design as the standard type ■ Equivalent exhaust performance ■ Touch panel operation (optional) *For more details, please refer to the PDF document or feel free to contact us.
Introduction to the standard doorless type draft chamber manufactured by Tada Seisakusho!
The "DFO Type without Standard Door" is a draft chamber manufactured by Tada Seisakusho. The main body is made of steel with a chemical-resistant baked coating, and the interior uses non-asbestos special resin boards, ensuring heat and chemical resistance. The work surface is customizable (options include epoxy, stainless steel, rigid PVC, etc.). Connections for water supply and drainage, electricity, and gas are made at the lower unit, allowing for easy maintenance and inspection. This type features an open lower unit space compared to the standard type. 【Features】 ■ The main body is made of steel with a chemical-resistant baked coating ■ The interior uses non-asbestos special resin boards ■ Consideration for heat and chemical resistance ■ Easy maintenance and inspection ■ An open lower unit space compared to the standard type ■ Touch panel operation (optional) *For more details, please refer to the PDF materials or feel free to contact us.
Introducing the interior PVC type draft chamber manufactured by Tada Seisakusho!
The "Interior Vinyl Type DF-IP Model" is a draft chamber manufactured by Tada Seisakusho. The main body is made of steel, and the exterior is finished with chemical-resistant baked paint. The interior is made entirely of rigid PVC, making it convenient for work involving acid treatments and other chemicals. Production of PVC sashes is also possible. 【Features】 ■ Main body is made of steel ■ Exterior is finished with chemical-resistant baked paint ■ Interior is made entirely of rigid PVC ■ Convenient for work involving acid treatments and other chemicals ■ Production of PVC sashes is also possible ■ Touch panel operation (optional) *For more details, please refer to the PDF document or feel free to contact us.
Can accommodate short delivery times and low costs! Custom specifications tailored to your request for experiments involving organic solvents and other flammable explosive gases.
At Tada Seisakusho, we manufacture draft chambers that enhance the safety and comfort of operators. We can freely create the main body according to your specifications! Since we have in-house production, we can deliver in a short time and at a low cost. We offer custom-made options, allowing for production in dimensions that fit your installation location. 《Comprehensive catalog of draft chambers is currently available! Please download it from below!》 【Features】 ■ Custom-made Since we produce to order, any request is welcome. It is also possible to have the entire exterior and interior made of stainless steel (SUS304). ■ In-house production We handle everything from development to assembly, on-site installation, and construction in-house, enabling short delivery times and low costs. ■ Small-batch production As a small factory, we have numerous achievements as a long-standing manufacturer. *For more details, please refer to the PDF materials or feel free to contact us.
![[Case Study] Chemical Manufacturer Draft Chamber](https://image.www.ipros.com/public/product/image/64c/2000491375/IPROS43276261384730954298.png?w=280&h=280)
Here is an example of a chemical manufacturer who was unsure about what specifications to choose and decided to introduce a draft chamber.
At Tada Manufacturing, we design, manufacture, construct, and sell various equipment related to research, inspection, medicine, and educational facilities, including draft chambers, clean environment equipment, and custom-made products. Here is an example of a chemical manufacturer that introduced a draft chamber. ■Challenge They were looking for a draft chamber but were unclear about the specifications and didn't know what to do. ■Proposed Solution We assessed their usage conditions and proposed a plan tailored to their site, which was possible because it was custom-made. Proposed products: Stainless steel draft chamber PVC draft chamber, etc. ■Result We were able to uncover the customer's latent needs and solidify a concrete proposal, leading to the successful introduction of equipment suitable for their intended use, resulting in their satisfaction. *In addition to stainless steel and PVC draft chambers, we can also accommodate accessories such as exhaust gas treatment layers.
Supports low cost and short delivery times! Both exterior and interior are made entirely of stainless steel, offering excellent durability, making it suitable for experiments using organic solvents.
The "All Stainless Steel Type / DF-AS Model" is a draft chamber made entirely of stainless steel (SUS304) for both the exterior and interior. Its all-stainless construction provides excellent durability, making it suitable for experiments using organic solvents. Since we handle all aspects of development, design, manufacturing, assembly, and on-site installation and construction in-house, we can offer the introduction of all-stainless draft chambers at a lower cost than other companies. We can manufacture the chambers freely according to the installation location, producing each one to order with varying widths and depths. 【Features】 ■ Entirely made of stainless steel (SUS304) for both exterior and interior ■ Water and gas supply... remote operation from the outside (considering safety during use) ■ Explosion-proof models can also be manufactured *For more details, please refer to the catalog or feel free to contact us.
Finally achieving the long-sought balance of comfort and safety! A new concept draft chamber.
The "TaD CHAMBER" is a product designed to prevent the leakage of toxic gases with low airflow, enhancing the safety and comfort of operators. Unlike typical air curtain products that blow air from the top of the chamber, it supplies air through slits in the front glass door. This design ensures that air does not directly hit the operators and does not disrupt the indoor air conditioning, allowing for comfortable work conditions. 【Features】 ■ Exceptional Comfort - Air is supplied through slits in the front glass door - Air does not directly hit the operators - Comfortable work can be conducted without disturbing the indoor air conditioning *For more details, please refer to the PDF document or feel free to contact us.
