Last Updated： Aggregation Period:Oct 08, 2025～Nov 04, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Oct 08, 2025～Nov 04, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Oct 08, 2025～Nov 04, 2025
This ranking is based on the number of page views on our site.
1～15 item / All 23 items
φ2.9mm ultra-thin industrial endoscope / Model number M1129NL29-CAM-35NS
This is a 2.9mm ultra-thin industrial endoscope that embodies the product development concept of simplicity, precision, and innovation. It can be used for inspection purposes in ultra-thin holes and inside pipes that cannot be seen with other endoscopes.
Industrial endoscope side-view camera with a small diameter of φ4.6, rigid pipe specification / Model number M1129DV-40CAMS120TS
Conventional industrial endoscopes only had specifications that allowed for viewing images directly in front of the insertion direction. While it was possible to check side images using a side-view attachment, there was a problem that using the side-view attachment on an endoscope camera with a wide field of view significantly limited the visible range. The side-view camera M1129DV-40CAMS120TS (M1129DV-40CAMS120THS) is designed with the camera oriented sideways, allowing for the possibility of viewing images directly to the side in relation to the insertion direction of the endoscope camera.
φ5.0 Industrial Endoscope Camera (with Camera Tip Protection Protector) / Model Number M1129NL-5.0CAM120KTS
The features of the M1129NL-5.0CAM120KTS include a protector at the tip of the camera. The protector can be attached and detached using M3 screws. It can be replaced if the metal tip wears down and gets damaged. It is recommended for cases where the end is likely to wear down due to frequent use of the endoscope.
Industrial endoscope camera with a diameter of φ4.6 / Model number M1129NL-46CAM90NTS
The general-purpose industrial endoscope M1129NL-46CAM90*** series is an industrial endoscope that boasts the same thinness and functionality as traditional fiber scopes, making it ideal for observing narrow areas. You can choose from two types of focus: near and far. This endoscope does not use any fibers known as imaging bundles, distinguishing it from fiber scopes. Instead, it features a structure that incorporates a super-compact camera using an imaging sensor at the tip of the endoscope, which is structurally identical to industrial endoscopes commonly referred to as video scopes or video endoscopes. There are also medical endoscopes and gastroscopes that have the same structure.
Endoscope camera for φ9.0 gas pipe (with camera tip protective protector) / Model number M1129RU-7CAM120SQS
The M1129RU-7CAM120SQS is a narrow-diameter endoscope developed for the purpose of easily inspecting nail penetration into gas pipes (indoor pipes). Due to its structure that employs a super small camera, there is no degradation in image quality compared to fiber scopes, and the honeycomb pattern characteristic of fibers does not appear on the screen. You can choose between two methods to view the endoscope images: using a dedicated 5.6-inch monitor or through an interface on your own PC. When a defect is discovered, it is also possible to capture an image of that location (in JPEG format).
CAD and CAM are fully integrated! It is possible to create machining paths for 2-axis lathes, holes, 2-axis, and 3-axis cutting.
"ZW3D 3X Machining" is a product designed for those who only want to utilize CAD and CAM functionalities. It fully integrates CAD features such as modeling, healing, and drawing, including direct translator functions, with CAM capabilities like creating machining paths for 2-axis lathes, holes, and 2-axis and 3-axis milling, allowing you to maximize its characteristics. 【Features】 ■ Stylish UI and easy-to-understand workflow ■ Powerful data conversion and enhanced collaborative design ■ Hybrid modeling that increases productivity and comfortable design ■ Efficient sketching and drafting, accurate 2D documentation ■ Powerful healing functions *For more details, please refer to the PDF materials or feel free to contact us.
Powerful healing features! Efficient sketching and drafting, accurate 2D documentation.
"ZW3D 3X Machining" offers CAD functions along with 3-axis machining, 2-axis machining, and 3-axis QuickMillTM for core and cavity parts in mold surface processing. QuickMillTM technology provides optimized machining methods for users, including automatic identification of part features and optimization of feed rates. 【Features】 ■ Stylish UI and easy-to-understand workflow ■ Powerful data conversion and enhanced collaborative design ■ Hybrid modeling that increases productivity and comfortable design ■ Efficient sketching and drafting with accurate 2D documentation ■ Powerful healing capabilities *For more details, please refer to the PDF materials or feel free to contact us.
By simply entering various conditions into the dialog based on the type of processing, it is easy to create processing data!
"G-Skill" is a lathe-specific CADCAM software that allows you to switch between the simple drawing and processing data creation screens with a single click, making it easy to use without feeling cumbersome. The CAD section enables the creation of general simple drawings and the reading and editing of CAD data (DXF), while the CAM section supports rough cutting of contour lines from round materials, rough cutting of forged products, and various finishing processes. It also supports various lathe operations such as grooving, threading, drilling, and end face processing. 【Features】 ■ CAD section: Emphasizes the standardization of operability with TRUNCAM ■ CAM section: Supports 18 types of machining processes ■ Simply input various conditions into the dialog based on the type of machining ■ Easily create machining data *For more details, please refer to the PDF materials or feel free to contact us.
Consolidate processing for multiple faces and edges into a single step! Achieve seamless integration from design to manufacturing.
TopSolid'Wire operates on the CAD system TopSolid, eliminating the need for complicated data conversion tasks. When you modify a shape, the wire paths and machining drawings are automatically updated, preventing rework and mistakes. Additionally, it allows for efficient wire cutting design based on the situation of the acquired data, including wire processing with a constant taper angle using 2D curves, creating upper and lower shapes using two curves, and directly selecting faces from 3D models to create wire paths. 【Features】 ■ Easy to use, easy to learn ■ Powerful CAD functions ■ Standardization of processing through methods ■ Consolidation of processing for multiple faces and edges into a single operation ■ Standard machine simulation included ■ Interference checks covering all fixtures and machines ■ Automatic creation of graphical processing instructions ■ Automatic correction of wire paths during design changes ■ Management of product shapes and NC data with built-in PDM ■ Realization of a seamless process from design to manufacturing *For more details, please refer to the PDF document or feel free to contact us.
Achieving high performance in functionality, accuracy, and cost!
The PCB integrated CAM system "PC-AutoCAM" is an all-in-one CAM system that includes all the necessary functions for printed circuit board manufacturing. It is equipped with various features such as "Gerber data editing," which allows input and output of various data used for handover with different CAD/CAM systems, DFM data analysis, and metal mask data editing. This system meets the needs for high precision, high quality, and large-capacity data processing, significantly shortening the lead time from design to manufacturing and improving productivity. 【Features】 ■ Gerber Data Editing Allows input and output of various data used for handover with different CAD/CAM systems. ■ Panel Layout Efficiently arranges single-sided data for the manufacturing work size, making it easy to place necessary accessories. *For more details, please refer to the PDF materials or feel free to contact us.
A must-see for companies involved in printed circuit board manufacturing, metal mask manufacturing, and printed circuit board design.
"PC-AutoCAM" is an all-in-one PCB integrated CAM system that includes everything necessary for printed circuit board manufacturing. It analyzes data output from CAD to match manufacturing specifications. It automates CAM editing tasks that were traditionally performed manually. By meeting the needs for high precision, high quality, and large volume data processing, it dramatically shortens lead times from design to manufacturing and improves productivity. Additionally, we will be exhibiting at the 38th "Internepcon Japan Electronics Manufacturing and Assembly Exhibition" held at Tokyo Big Sight. We sincerely look forward to your visit. 【Features】 ■ Rich art frame editing and utility, correction functions, and suitable layout functions ■ Analyzes data output from CAD to match manufacturing specifications ■ Automates CAM editing tasks that were traditionally performed manually ■ Outputs data for NC drilling machines and contour processing machines *For more details, please refer to the PDF materials or feel free to contact us.
A must-see for parts assembly companies and EMS manufacturers! Introduction of the metal mask data editing system.
"Stencil CAM" is a Gerber editing system specialized in creating and correcting the shapes of metal masks. It allows for flexible editing of metal mask shapes, contributing to improved implementation quality. It has been adopted by 70% of domestic metal mask manufacturing companies. By performing editing in-house, it is possible to cut costs by over 1 million yen annually. Additionally, we will be exhibiting at the 38th "Internepcon Japan Electronics Manufacturing and Assembly Exhibition" held at Tokyo Big Sight. We sincerely look forward to your visit. 【Features】 ■ Automatic opening conversion function ■ Automatically recognizes shapes and instantly converts them to suitable opening shapes from the library ■ Enables in-house editing of tasks previously outsourced to specialized companies ■ Abundant checking functions ■ Equipped with checks for gaps between openings and solder escape checks, among others *For more details, please refer to the PDF materials or feel free to contact us.
Supports ODB++ data output! Cost reduction through the replacement of foreign CAM systems!
"PC-AutoCAM" is a high-performance and high-functionality system that meets modern needs. As the demand for high functionality and high performance in electronic devices increases, the requirements for printed circuit boards have also risen. This system responds to needs such as high precision, high quality, and large-capacity data processing, significantly shortening the lead time from design to manufacturing and improving productivity. [Features] ■ Data editing for printed circuit boards ■ Direct interface to manufacturing and inspection equipment ■ Reduction of operational costs by replacing foreign CAM systems ■ Support for ODB++ data output *For more details, please refer to the PDF materials or feel free to contact us.
Would you like to create a unique CAM in the world? Our support team will work together to help improve your operational efficiency.
As one of the few CAM systems for woodworking, 'alphacam router' has been cherished for a long time and has catered to various needs. It has been adopted by many manufacturers in Europe and the United States, and has already become a standard in the woodworking industry. In Japan, it is used for a wide range of manufacturing, from simple router-processed parts to complex 5-axis processed furniture. 【Features of alphacam】 ■ Freely customizable to meet needs ■ Special processing commands, full automation, data extraction from Excel sheets, and more, with limitless applications ■ Customization is possible using open APIs and VBA, allowing for processing programs that could not be output by general-purpose CAM systems *For more details, please refer to the PDF materials or feel free to contact us.
