List of Architectural fittings products
- classification：Architectural fittings
2296～2340 item / All 3571 items
Natural wood endless tape with a thickness of 0.9 to 3 mm. It contributes to improved yield and productivity as a substitute for solid wood for the edges of furniture and fixtures.
- others
By simply increasing the formwork, we can achieve a variety of variations. Formwork costs are reduced, and productivity is improved! We respond to various site needs with multifunctionality.
- Gutters and U-shaped gutters
Surface treatment specifications for hot-dip galvanized zinc (Z27)! Introducing the hardware used for joint connections of the foundation.
- Joints between components
A lineup of products for various uses! We offer four different sizes.
- Joints between components
We recommend using a hex bit for tightening the multi-bolt! We have three sizes available.
- Joints between components
We offer a wide range of sizes! Made from carbon steel that meets strength classification 4.6.
- Joints between components
It prevents the overturning of shear walls against the pulling forces generated during earthquakes and strong winds!
- Joints between components
- Safety and consumables
- Safety Supplies
Introducing a high corrosion-resistant and high-strength 0.6mm thick brace hardware that can be installed from the inside!
- Joints between components
Suitable for use with solid wood! A product suitable for seismic reinforcement of existing wooden houses.
- Joints between components
It is possible to install without modifying the exterior wall or processing bolt holes!
- Joints between components
Jointing of horizontal members and columns, as well as horizontal member connections! Beam end hardware with a short-term allowable tensile strength of 13.5 kN.
- Joints between components
Reduced interference with floor sheathing and hold-down hardware! Bracing connection hardware for wall reinforcement with 2x and 3x strength.
- Joints between components
Can be installed without distinction on the top, bottom, left, or right of the brace ends! Brace connection hardware for a wall multiplier of 1.5 times.
- Joints between components
Equivalent certified product to Z-mark hardware (BP-2)! No need to notch the columns and horizontal members, allowing for the connection of brace ends.
- Joints between components
Can be installed in any direction: lightweight and compact brace connection hardware.
- Joints between components
No screws needed to fasten to the horizontal framing! A brace joint hardware that can be installed even with floor plywood in place.
- Joints between components
A brace joint hardware that allows for the connection of brace ends without the need to notch the horizontal member.
- Joints between components
The embossed processing prevents the screw heads from being visible! It is possible to directly attach materials like load-bearing panels over the hardware.
- Joints between components
Internal use compatible! Hardware shape that avoids interference with vertical bolts for hold-downs.
- Joints between components
Quality performance tested! A brace connector with embossed processing that hides the screw heads.
- Joints between components
Introduction of diagonal braces with standardized dimensions that are symmetrical and can be installed in any orientation.
- Support hardware/opening hardware
Used for floor plywood with a thickness of 30mm or less! It is a brace compatible with floor plywood for interior use.
- Support hardware/opening hardware
Introducing the kasugai, which firmly connects columns and beams, as well as roof beams and roof supports!
- Support hardware/opening hardware
Introduction of column connection hardware for the joints between the sides of columns and horizontal members, as well as between beams and roof supports!
- Support hardware/opening hardware
Improved construction efficiency compared to CP-L! This is a column connection hardware that makes it easy to construct vertical walls.
- Support hardware/opening hardware
Compatible with thicknesses below 30mm! Installation efficiency with 4 screws. Can be installed over floor plywood.
- Support hardware/opening hardware
High corrosion resistance and high tensile strength with a thickness of 0.6mm! It has strength equal to or greater than Yamagata Plate VP.
- Support hardware/opening hardware
The construction efficiency is improved with a minimum specification using 5 screws! For joining columns and horizontal members, etc.
- Support hardware/opening hardware
Introducing column connection hardware for plywood specifications for structural plywood with a thickness of 12mm or less!
- Support hardware/opening hardware
Can be installed with 4 screws! Quick installation and easy work at heights.
- Support hardware/opening hardware
A design and performance that adds an accent to your home! Easy-to-pull depth and protruding door handles.
- Door Accessories
Design and performance that become an accent in your home! Stainless steel shelf brackets.
- Support hardware/opening hardware
- Other fittings
A design and performance that adds an accent to your home! Stainless steel pipe support hardware.
- Support hardware/opening hardware
A design and performance that adds an accent to your home! Stainless steel pipe support hardware.
- Support hardware/opening hardware
Design and performance that become an accent in your home! Stainless steel shelf brackets.
- Support hardware/opening hardware
- Other fittings
Design and performance that become an accent in your home! Stainless steel shelf brackets.
- Support hardware/opening hardware
- Other fittings
A design and performance that adds an accent to your home! Stainless steel shelf brackets.
- Support hardware/opening hardware
- Other fittings
Design and performance that become an accent in your home! Stainless steel shelf brackets.
- Support hardware/opening hardware
- Other fittings
Fixing blue tarps while waiting for roof repairs! Here are some reinforcement techniques you can do yourself in case of emergencies.
- Disaster prevention fittings
Difficult to pull out, yet easy to remove strong pegs! Lightweight and suitable for securing large facilities without a foundation.
- Joints between components
The 254SMO model has arrived at Nordlock! We are introducing a product that is particularly suitable for devices where rust is a concern.
- Joints between components
Safe and reliable even under intense vibrations, guaranteeing clamping force! Effective in preventing loosening of screws.
- Joints between components
Push Swing Handle for Door - Palette Line
- Hardware Doors, Handles and Locks
- Door Accessories
Non-contact entrance system (Pasta Touch LE)
- Entrance/Exterior Doors
- Door and window locks
- Automatic door opening and closing devices for entrances and exits (auto doors)
Forgotten Key Lock Prevention Key (Memory Eyes)
- Security locks (windows, front doors, etc.)
- Door and window locks
- Security locks (windows, front doors, etc.)