It is an ideal tensile test for screws and nails, as well as adhesion tests for coatings, featuring a compact, lightweight design that requires no power supply.
Introducing in-situ permeability testing for evaluating the density of newly constructed RC structures and verifying the effects of curing!
The air permeability of surface concrete can be easily measured completely non-destructively!
A portable gas detection camera that can easily and safely identify gas leak locations.
Ministry of Land, Infrastructure, Transport and Tourism - Catalog of Road Inspection Support Technologies: Management of road surface conditions using action cameras! Ensuring users can drive comfortably.
Press the button after placing the fruit! Measure the internal quality of each fruit without damaging it.
Resistance measurement, load testing, and high-temperature testing of contact probe pins are possible!
Conductivity-based authenticity inspection! Non-destructive and extremely rapid testing is possible.
The Utility Scan Smart is a compact ground radar system suitable for underground buried pipe exploration. [Small and lightweight type]
Free guide for selecting component analyzers! In addition to product information, we provide clear explanations of case studies and comparison information.
Standard type! Low running costs! Ultra-high sensitivity allows inspection of aluminum packaged products!
Accurately detecting defects in metallic materials and welds of nuclear power plants that are subject to evaluation.
Providing a versatile and user-friendly solution for a wide range of microhardness scale testing.
Detection size 28cm x 24cm, pixel size 50μm, X-ray withstand voltage 225kV flat panel detector.
Introduction of a testing method utilizing capillary action when the infiltrating liquid seeps out of the wound.
A testing robot capable of conducting drainage screening inspections at ultra-low cost!
For the contact medium of ultrasonic flaw detection, use "Sonicoat."
On-site calibration or pickup calibration is available! Some JCSS calibration is also possible. This helps reduce calibration costs!
Investigate multiple pipeline leaks at once! A leak detection system that can be used even in high-traffic areas.
Convection heating mode and powerful heater equipped! Achieves excellent temperature uniformity.
A representative of rebound hammers that is simple yet commands immense trust.
Ideal for hardness testing of thin materials, small items, and complex-shaped products!
Active in inspections in areas where GPS cannot reach! Our technology has been registered and published in the "NETIS" and "Inspection Support Technology Performance Catalog."
Compact and simple, easily systematizable phased array ultrasound module.
USB connection (laptop/tablet PC) ultrasonic flaw detector
A diagnostic device that can non-destructively determine the presence or absence of "fracture" in rebar from the surface of concrete.
Ultrasonic flaw detector that can be used like a smartphone.
Testing three types of warning sensors: radar, laser, and missile.
One of the non-destructive testing methods using impact elastic waves for the purpose of assessing the integrity of concrete structures.
A probe consisting of a vibration source and two sets of vibration receivers! A system that enables efficient measurement.
Instant diagnosis possible anytime and anywhere, day or night! Electromagnetic wave detector with leak detection function.
Vibration testing and various vibration measurements are possible with calibration equipment! Slim high-performance charge amplifier.
Providing various testing devices and solutions! A rich lineup.
It is a detection device that can identify cracks in the underground without excavating the ground.
You can conduct product inspections of refractory bricks used in blast furnaces.
Confirmation of abnormalities below the road surface boundary can be inspected without excavation and with a complete 360-degree view! Inspection results can also be checked immediately on a map.
Easily measure without destroying the target object! This is an essential method for maintenance inspections of various plant equipment.
This is a compact X-ray inspection device developed by applying the technology of AA battery-operated small X-ray units, combined with a high-sensitivity, high-resolution flat panel detector.
Lightweight design and compact! Offering open short testers at a low cost!
[Non-destructive testing] Non-contact inspection can be performed using terahertz light without damaging the measured object. An all-in-one model equipped with a scanning stage and software.
It can detect abnormalities that cannot be found with X-rays or images! It can also identify equipment anomalies, conduct product inspections, and assess the hardness of meat. A system with 40 years of experience and trust.
[Free Distribution of Proceedings] Comprehensive Understanding of 3D Image Analysis! 14 Papers Condensed into 60 Pages - Wisdom from a 20-Year Veteran in the Industry: X-ray CT/Image Analysis/Three-Dimensional/Contract Services
Inspection of finer scratches using fluorescence. We take pride in our high distinguishability.
Compact, lightweight, and high-output portable UV-LED light with easily visible unevenness. [Black light]
Test panels for penetrant testing with high quality and reliability! Used by aerospace companies.
There are many achievements, such as incoming inspections using dedicated irradiation chambers for complex-shaped cast steel products and welded parts.
It supports a capacity range of 500N to 50kN and delivers excellent performance with unprecedented accuracy and reliability. It is equipped with multiple features that enhance safety.
NAOMi-CT 001C/X-ray Computed Tomography Device *Sample imaging currently accepted
NAOMi-CT 90 GAIKAN/Flat X-ray Imaging Device *Sample shooting currently accepted
Class-leading resolution, maintenance-free vacuum tube.
Communication between people and mechatronics. Nagano Automation Co., Ltd.
Multi-functional, high-performance thermal imaging series featuring ultra-sensitive cooling detectors (InSb/MCT) with a 3M (1920x1536) pixel model available.
Introducing SURAGUS products that provide solutions specialized in non-destructive testing.
Top-class domestic implementation results! It is an automatic inspection system that detects minute leaks with high speed and high precision.
Reliable durability and proven performance! Widely used for mine and unexploded ordnance detection in Afghanistan.
We will support you in using newly manufactured products and equipment, as well as existing operating equipment and machinery, in a "safe and secure" manner.
It is a testing method that uses radiation to capture the flaws, conditions, and structures inside a test specimen onto film or similar media.
Utilizing technologies such as non-track navigation, image recognition and analysis, and multi-sensor integration!
Super environmental adaptability! For unmanned inspections in low-light environments and complex terrains.
Durable FRP Tank <Design, Manufacturing, Inspection, Degradation Diagnosis> 【*Free Anchor Calculation】
Complete non-destructive testing without leaving any measurement marks is possible!
Identify the location of through cracks in the steel deck from the road surface! Steel deck inspection device using eddy current testing.
Zero defects in spot welding! Welding strength is immediately measurable. Low cost, easy operation, high precision +/-1%.
Stores temperature check history data for up to 50,000 people, with cloud-based history management features!
Leave the inspection, examination, and non-destructive testing of bridges to us.
This is an industrial videoscope with outstanding portability and excellent operability, featuring an outer diameter of φ6.0mm and an effective length of 3m.
It can detect pinholes in metal coatings. (Target coating thickness of 1mm or more, detection voltage of 5 to 23kV)
Steel materials can be distinguished into two types: SS400 and SM490 according to JIS standards.
Results available in as little as 3 business days from sample arrival! Reliable and trustworthy in-house testing!
The contact medium for ultrasonic testing is "Sonicoat," which is suitable for inspections in high-temperature areas and for applications such as ultrasonic flow meters that require long-term coupling.
Significant reduction in labor costs and equipment costs for in-house calibration! On-site calibration or pickup calibration is available. Reduce calibration costs!
Phased array ultrasound inspection device equipped with the world's highest peak real-time TFM functionality.
High-end portable phased array and TFM inspection device
Ultrasonic thickness measurement compatible with various materials such as steel, titanium, aluminum, and FRP.
Are you troubled by leaks that you can't hear? A device that can accurately detect even the tiniest leaks that seep out!
Electronic listening device for detecting weak water leak sounds in VP pipes and polyethylene water supply pipes!
Support for rapid reduction of norovirus infection risk with one of the largest daily processing capacities in the country.
Equipped with a variety of functions despite its compact body. A differential pressure air leak tester that pursues ease of use and cost performance.
Captured the condition of the exterior wall with a higher surface temperature compared to normal areas using an infrared camera!
This is an inspection technique that can examine defects and conditions, regardless of material, such as inner surface defects in welded areas of steel pipes and plates, and inner surface defects in cast steel products.
This is an inspection technique used for welding inspections of large tanks (new installations, open inspections) and various small components.
An endoscope is inserted through the water supply terminal or cleaning port to visually observe and record the occurrence of rust lumps and blockage conditions inside the pipe using camera and video recording.
By measuring the depth of neutralization, the load-bearing capacity of concrete structures is estimated.
Through computer analysis, we diagnose piping quickly and accurately without stopping the building's functions!
You can visually confirm the embedded objects inside the concrete, and all the investigation results are available on the spot!
Equipped with a multi-focus X-ray tube! Effective for various applications such as resin parts, rubber parts, and metal parts.
Supports analysis that makes it difficult to separate interface waveforms of each layer! Also compatible with multilingual display.
This is a device for acceptance inspection of speakers for embedded electronic equipment (imported).
Investigating changes in characteristics by varying the driving conditions of the ABS unit! A device for running evaluation.
Quantitative measurement of cutting is possible! We will listen to your requests and develop a testing plan.
By reviewing the cutting conditions, the work time has been shortened! It is possible to present appropriate solutions.