Wakayama Red Cross Blood Donation Center: [CoolSarm Construction Case]
Cuts 97% of radiant heat! Achieves tremendous effects at a low cost, reducing heating and cooling expenses! Fire resistance has been certified by the Ministry of Land, Infrastructure, Transport and Tourism.
Achieving high-strength wall substrates from 8m to 10m! Only interior construction contractors will carry out the work, from the substrate to the board installation!
It reflects radiant heat to prevent heatstroke and suppress temperature rise! Achieve heat insulation and thermal insulation performance without stopping the operation of factories and warehouses!
Radiation heat cut by about 97% - a sheet for containers that manages the temperature and humidity of delicate cargo.
An ecological and economical energy system!
Five-layer structure for effective heat insulation and thermal insulation!
Safe and high-performance insulation building material 'Dampack' made from paper.
This is an ideal product for buildings specified in notifications, etc., with a bulk density of 0.04 or higher, used for soundproofing and thermal insulation of partition walls in apartments and condominiums.
Large wave slate roof renovation method, new construction method Yamato Cover Roof
Thin, light, and soft! Enables insulation in areas below 1mm, contributing to insulation in a wide range of fields.
General building condensation prevention and high insulation / thermal insulation spray method for refrigerated and frozen warehouses using rigid polyurethane.
Proven results in the manufacturing industry! What kind of factory can operate without air conditioning even at an outside temperature of 38.5 degrees?
Ultra-thin high heat insulation! Featuring durability and performance tests of 'Reflectix', born from the space industry.
This is a temperature cracking suppression technology using water and heat suppression type super delay agents.
An exterior insulation finishing system that excels in impact resistance and heat insulation. It protects the building structure while maintaining a constant indoor temperature due to its excellent insulation properties. We are also recruiting construction agents!
In parks and schools! The newly developed special resin nozzle atomizes a small amount of water into a fine mist for three-dimensional watering.
Safe because it doesn't spread flames! An insulation material that is particularly effective during summer sunlight due to its heat-shielding properties! Compatible with additional insulation!
It is a structural thermal bridge prevention system that enables the realization of completed external insulation buildings.
Heat insulation sheet "Thermo Barrier Top"
A wood fiber insulation method that makes summer heat comfortable! It creates an indoor space with soundproofing performance comparable to that of a library.
♦Affordable and Reliable♦ Securely fastens insulation boards with high-strength washers. Compatible with all EPS insulation materials! For external insulation methods (EIFS).
The change from OFF (opaque) to ON (transparent) is truly a "moment"! It changes quickly and is presented smartly.
Cable Flame Retardant Fireproof Construction Method Catalog
Exhibits high thermal insulation effectiveness! Prevents the rise in indoor temperature and significantly reduces cooling load!
A diverse range of materials and a design-rich LLH external insulation ventilation layer system. It combines high stability and strength.
Heat insulation and thermal insulation system for metal folded plate roofs utilizing the effects of shade.
For those who want to use insulating paint "Gaina" on exposed concrete walls but still wish to preserve the texture of the concrete, we present our unique technique that you must see!
Solve your dampness problems in factory ceilings, office air conditioning, and restaurant kitchens!
Contributing to the high performance of residential buildings! Successfully dispersed high insulation foam agents at a high concentration, achieving an F rank! Also compatible with additional insulation!
Just by applying heat-insulating materials and heat-insulating sheets, you can take measures against heat, prevent heat stroke, improve the working environment, and ensure safe construction with patented heat-insulating techniques!
The "impregnation technology" maintains the long-term performance of the agent even when exposed to soil and rainwater.
Complete external insulation from the foundation to the roof! It is a foundation external insulation method with termite resistance.
Wall panels for traditional wooden houses with integrated window frames! Panels that provide added value through reduced construction work.
"Under Construction of Ribbed Roof" | Ribbed Roof (Construction from Under the Roof)
Control heat year-round! Chalking occurs almost not at all, and the deterioration of the paint film is gradual, ensuring long-lasting durability.
Do you know about heat-insulating paint with a clear heat insulation principle? CoolSarm is a high-performance heat-insulating paint developed by NASA that blocks sunlight using ceramics.
Improvement of comfort, energy efficiency, and health! Insulation installation can be done quickly and easily.
Because it is a blowing method, continuous insulation construction without gaps can be uniformly applied to every corner.
This is a washer suitable for fixing rigid additional insulation materials such as Styrofoam and glass wool boards.
Customize your room according to the purpose of introduction! You can choose and order options such as air layers, fabric types, and fabric colors.
Roof fire resistance 30 minutes FP030RF-1659 (TS board 20, 25, 30 + glass wool board)
This is a board-type residential insulation material made of rock wool board, which excels in thermal insulation and water resistance, suitable for external insulation methods. It can also be used as additional insulation.
By covering the top of the folded plate roof with a heat-insulating shade sheet, we can suppress the rapid rise in indoor temperature during the summer!
It is very effective to use the attic space as a loft or storage.
Insulation material that provides peace of mind even after long-term use! EPS excels in long-term insulation performance.
Cable and conduit floor round hole penetrating hardening putty
Technology made in Japan! Creating a new perimeter zone by warming glass.
Resin outlet boxes can be used in fire protection areas! This achieves a reduction in the burden on contractors【Sekisui Fiblock】.
A restoration method that can achieve both insulation and waterproofing effects with a single construction.
With a sophisticated drone, safely inspect roofs from above! You can check the condition of the roof in real-time on the spot. Damaged areas can be identified immediately.
Ceramic cover CC100 developed by NASA. It is a high-quality, high-standard product known as thermal insulation paint and heat-resistant paint.
A insulation construction method that pursues the comfort of the residents! Achieving high insulation performance that is unimaginable with conventional cellulose fiber standards!
The repair of aging slate and metal roofs of factories and warehouses is done with polyurea. Using rigid foam polyurethane and polyurea provides insulation, heat insulation, and extends lifespan.
15 years of durability! Energy-saving and insulation measures for buildings focus primarily on the insulation of window glass!
LLH wet-type external insulation is constructed using the trusted technology of the Passive Wall(R) method, which features rich textures and high insulation performance!
You can choose "Neoma Foam," the insulation material from Asahi Kasei Construction Materials, which boasts top-class thermal insulation performance! You can also choose the exterior materials.
Experienced energy managers on-site provide support! We improve the work environment by cutting radiant heat. *Catalog available.
To ensure that buildings continue to stand safely for a long time! Protecting buildings from the ground during frequent earthquakes.
Solving the challenges of heat-insulating coatings! A method of attaching Sky Sheets along the standing seam roof with double-sided tape.
This is the company brochure of Seawater Chemical Industry Co., Ltd., which is engaged in environmental and biosystem businesses.
We offer a lineup that includes "Softech," which has moisture permeability and effectively prevents condensation!
Insulation material made of bead method polystyrene foam specifically for wooden floor insulation rigid floor (without joists) construction method!
A seamless polyurethane coating provides reliable waterproofing.
As the high performance of housing is being promoted, expectations are placed on revolutionary insulation materials.
Patent obtained! A mere 0.1mm energy-saving revolution. A new method for direct application on roof exteriors.
A mere 0.1mm energy-saving revolution! Introducing a new direct-adhesion method for roof and exterior walls.
Introducing a thermal insulation material and direct bonding method that creates innovative energy-saving effects for measures against heat stroke!
Reduction of heating and cooling costs for factories, warehouses, sports facilities, and commercial facilities.
A modular plastic concrete formwork system that is ideal for creating underfloor spaces and raising floors, allowing for the rapid integrated molding of beams and floors.
By simply applying it over the equipment, approximately 10% energy savings can be achieved. It can be applied without stopping the factory. We offer free energy savings predictions.
Create a space that can be comfortably lived in for a long time while minimizing the impact on the Earth's environment!
Unparalleled insulation performance. Vacuum technology has evolved to this point. The common understanding of insulating glass is about to change.
Developed as a lesson from the earthquake. The "NK Method," a construction technique that maximizes the characteristics of wood to be resilient against earthquakes.
Keeping the indoor brightness while staying cool in summer and warm in winter! Improving the living environment by the window and enhancing comfort.
Contributes to reducing electricity costs! Insulation material that can reduce running costs through energy saving.
Reflects radiant heat and keeps the indoor cool air! Recommended for summer heat and heatstroke prevention.
To prevent moisture and steam penetration, condensation does not occur! It is also effective against mold.
It is possible to reduce the thickness of the walls, allowing for a wider space!
With a thickness of just 8mm, it cuts out radiant heat from the sun! Achieving significant reductions in air conditioning electricity costs with high insulation and heat retention effects.
From insulation to heat shielding era! Creating a comfortable space that is cool in summer and warm in winter! Introduction of Reflectix case studies.
Cuts 99% of radiant heat! Energy-saving as it does not use electricity. Heat insulation material 'Reflectix' *Samples available!
Construction screw fasteners with self-drilling screws featuring Delta-Seal coating for thin steel plates.
Economic and strong screw fastening for insulation materials.
Thermal bridge reduction for external thermal insulation composite system (ETICS) with elevated installation construction.
A versatile hammer set fastening that can also be used for rotational installation.
Fire-tested metal insulation fasteners for fire-resistant insulation boards.
Adjustable cover cap for DHM and DHM A2.