[Free Cut Samples Available] Achieving excellent moisture retention and heat insulation! Compatible with various structures for both vertical and horizontal use.
It is possible to repair the waterproof layer following concrete cracks! Prevents deterioration due to carbonation.
Excellent shock resistance! This safety net helps prevent falls and accidents for workers.
Quality inspection and decay diagnosis of wood using stress waves.
Suppress early drying shrinkage and reduce fine cracking! Prevent deterioration of surface aesthetics.
Integrated moisture retention and thermal insulation can be attached to the structure, suitable for the construction of high-quality concrete structures.
Excellent impact resistance! A net that helps prevent falls and material drop accidents for workers.
This is a two-layer mat that can simultaneously perform wet curing and thermal insulation for concrete. The moisture layer and the insulation layer are integrated, allowing for installation in one go.
The standard specifications are 1m wide and 20m long! Introducing a reusable concrete wet curing mat.
Salt damage, neutralization suppression, rust prevention! Super hydrophobic properties strongly protect the joints of concrete and tiles.
Contributing to high-quality concrete and extending its lifespan! Just soak the water into the water-retaining part.
Concrete is cured through low-cost and simple construction methods.
Shortening the curing time of concrete in cold weather! Introducing curing agents that contribute to carbon neutrality.
Long-term aging of concrete structures addressed! Environmentally friendly and safe inorganic agents.
For curing concrete pavement and structures! Available in polyurethane foam and non-woven fabric.
It can fill the P-con holes (separator holes) that occur during concrete pouring.
Contributes to the improvement of workability! Finishing aid and curing agent that prevents initial surface drying cracks.
Protect concrete from water and extend its lifespan! Demonstrates effects of waterproofing, rust prevention, and improved abrasion resistance.
Just by sprinkling water from above, a high-strength concrete surface is formed. No heavy machinery or special workers are needed, resulting in a short construction period. A collection of construction case studies is available.
Just stick a high water-repellent sheet to the formwork! Introducing a method that ensures reliable curing for a long period.
NETIS registered product! A specialized protective sheet for blocks, ideal for winter protection (insulation). Temperature comparison experiment materials are also available!
We will provide total coordination for concrete curing tailored to the site.
The PVC flooring was described in comparative advertisements from other manufacturers as "fragile" and "not suitable for general disposal," so we conducted verification tests.
Curing agents for all types of concrete surface finishes.
Ultra-high strength polymer molded products to prevent discoloration, stains, cracks, defects, and damage that are likely to occur during the storage, curing, packaging, and transportation of precast concrete slabs.
Can be applied to vertical and three-dimensional surfaces! High water retention due to the four-layer structure eliminates the need for additional watering for about 7 days!
NETIS:VE is a specialized bubble wrap designed for concrete curing. It suppresses moisture evaporation from the surface and effectively retains moisture for curing.
A specialized bubble wrap dedicated to concrete curing! It suppresses moisture evaporation from the concrete surface, allowing for moisture retention and sealing curing!
◇Specialized bubble wrap dedicated to concrete curing ◇NETIS: HK-150002-VE ◇Applied after demolding to prevent moisture evaporation and provide insulation
It strengthens the concrete and also enhances its appearance.
Easy curing! A convenient curing material for semi-flexible pavements.
Contributing to carbon neutrality! Securing working time and shortening curing time.
Challenging the limits of mortar! Demonstrating excellent efflorescence prevention even at low temperatures.
Water-hardening powder binder made from inorganic waste materials.
Introducing a rich lineup including the "3M 99BB," which allows for light and smooth operation!
For the protection of concrete surfaces and the suppression of internal rebar corrosion! A protective material that realizes the longevity of civil engineering structures *silicate-based impregnation material, reactive, sodium silicate-based.
Unlike water repellents, it excels in weather resistance, thermal insulation, and dirt resistance, enhancing the substrate over time. For substrates that have already shown signs of deterioration, it prevents further degradation.
Our original products are also used by major house manufacturers and general contractors!
The TS-30K is a compact electronic scale for special purposes, integrated with a carrying case, designed for concrete, asphalt, and soil.
This is a concrete moisture meter that can also output management documents via a printer. Additionally, the HI-300J, which is officially adopted by JR East's "Standard Specifications for Civil Engineering Works," is also available.
Long-lasting structures! Curing materials that protect concrete from initial drying shrinkage cracking.
For the filling of powders that would traditionally leak, filling materials that dislike moisture, and the storage and movement of moisture-retaining fillers.
The spacing of the pressure plates is wide, and bending tests for box culverts and other structures are also possible!
It is possible to estimate strength over a very wide range compared to conventional Schmidt hammers.
A representative of rebound hammers that is simple yet commands immense trust.
If you have any issues with Proceq products such as Schmidt hammers, Echo chip series, or profilers, please consult us!
Very convenient for temporary setups and protection! It's a sturdy product that is shock-resistant and can withstand compression.
Easy to lay down and simple to use for protection. Equipped with anti-slip features suitable for vehicle traffic!
It is recommended for ground maintenance in agricultural fields that are easily affected by muddy ground and weather conditions!
A masking tape coated with a strong adhesive acrylic adhesive on a special polyester cloth substrate.
A standard product for concrete curing that can be used in both summer and winter.
Concrete curing material that can be used in both summer and winter.
It is possible to cure the concrete surface without exposing it to the outside air, effectively suppressing moisture loss for an extended period!
Less overlapping loss! Lightweight concrete curing mat that makes installation and removal easier.
On-site mixing is possible with just water! A surface repair material for residential foundation concrete that can be used for a wide range of applications.
For protective materials such as basic, painting, and interior finishing! It maintains stable reaction hardening of concrete.
Curing of the base concrete, preventing concrete cracking! Promotes stable concrete hardening.
Since resin-based mats are often used indoors, we conducted combustion tests on PS-Y made of PVC and other polyethylene products.
Suppressing early cracking! For bridge superstructures, concrete products, ground slabs, and floor slabs, etc.
Improve the density of concrete! Suppress moisture loss and reduce initial cracking.
The filter sheet (FS form method) is a technique that enhances the appearance and durability of concrete surfaces.
Strongly protect concrete and tile joints! A resilient waterproof layer is formed within the concrete.
Ideal for repairing cracks! It improves concrete from the inside with high permeability.
Protect your site from dust! An excellent product that allows for quick and easy protection even by one person.
It is finished using a special aqueous acrylic solution as a curing material for Renderock mortar, applied with a brush, roller, or spray.
It is a water-based curing agent applied to the surface of concrete and mortar after construction.
Concrete using medium heat cement, etc.
NETIS registered product! A revolutionary concrete treatment agent that prevents cracking due to shrinkage.
It is a high-performance membrane curing agent that is sprayed onto concrete surfaces to enhance curing effects.
Lightweight boards from "Puchi Puchi"! A wide variety of plastic boards with excellent rigidity.
Publishing processing technology and examples of "Plaparl," characterized by lightweight, high rigidity, and durability.
Suppresses moisture evaporation from concrete surfaces. You can effectively retain moisture using bubble wrap. With a length of 42 meters per roll, it is easy to apply to small areas.
■ Moisture-absorbing heat-generating material "Breathe Thermo" combined with highly insulating "Bubble Wrap" for concrete curing materials. ■ Reusable and economical.
■ Moisture-absorbing heat-generating material "Breath Thermo" combined with highly insulating "Bubble Wrap" for concrete curing materials. ■ Reusable and economical.
NETIS:VE is a specialized bubble wrap designed for concrete curing. It suppresses moisture evaporation from the surface and effectively retains moisture for curing.
NETIS Evaluation VE is a specialized bubble wrap specifically designed for concrete curing. It suppresses moisture evaporation from the surface and effectively retains water for curing.
Improving the quality of concrete curing in cold weather!
We are introducing numerous examples of civil engineering projects using "Super Crackless" with photos!
A lineup of various protective materials for finishing parts such as security, floors, walls, and ceilings!
A general-purpose type that takes into account the introduction costs!
Two-stage combustion with strong and weak modes significantly reduces kerosene consumption in weak combustion mode.
Significant reduction in the generation of formaldehyde and nitrogen oxides (NOx).
Environmentally conscious with the newly developed OE combustion system.
Concrete and asphalt sample cutting machine in the testing room.
Easy installation by simply placing it in the tank.
No worries about accidents such as fires or carbon monoxide poisoning! Ideal for initial curing of concrete in heavy snow and extremely cold areas.
Suppress alkali-silica reaction (ASR) and prevent internal cracking.