Compatible with a wide range of soil types from clay layers to gravel layers! A mud additive that enables the plastic fluidization of soil and sand.
Easy installation without the need for grout material! A compact and well-fitting mechanical rebar joint.
[Catalog Present] Demonstrates high water stop effectiveness! A revolutionary water stop method that reduces the causes of structural deterioration.
For grouting work that requires high intensity in a short time. Long-term strength is also consistently achieved.
Easy installation allows for reduced construction time! A mechanical rebar joint born from the trust in friction welding.
This is a technique for grout filling inspection of PC bridges using wideband ultrasonic method WUT.
Non-shrink grout mortar, as a non-shrink slurry! It demonstrates excellent performance.
No grout material needed for easy installation! Compact! A mechanical anchoring plate that reduces installation time and labor.
Easy installation without the need for grout material! A compact and well-fitting mechanical rebar joint.
This is a method for sectional repair of cracks and defects in concrete structures.
Just mix with the specified amount of water on-site! You will obtain high-quality non-shrink mortar.
It has excellent fluidity and can fill complex shapes and voids, such as those in chiseled concrete, thoroughly.
Easy installation without the need for grout material! A compact and well-fitting mechanical rebar joint.
【New Product】Maintaining the fluidity, workability, and cost-effectiveness of air mortar, we have achieved underwater non-separation performance! Available for supply nationwide!
A ground anchor method with excellent maintenance management and long-term retention characteristics, featuring high corrosion resistance and high strength.
Shut out all leaks! Smart water-stopping method using high-pressure injection technique.
Compatible with a wide range of soil types from clay layers to gravel layers! A mud additive that enables the plastic fluidization of soil and sand.
Excellent separation and reduction effect! Minimizes water quality pollution in the construction area.
For use as a substitute for narrow areas and small-scale concrete pouring. Suitable for large cross-section construction due to low heat generation.
Due to the absence of bleeding and settlement, there are no voids left after filling, ensuring reliable load transfer.
For preventing the scattering of track ballast. It develops strength quickly and has excellent filling properties.
New Funcoat 50 is a semi-flexible pavement injection material (normal/fast-setting).
Special water-based emulsion + hydrophilic urethane mixed injection! A waterproofing method that does not depend on the amount of leakage.
Understanding the filling condition of PC grout through non-destructive testing! Non-destructive testing using wideband ultrasonic methods.
Introducing prestressed concrete bridges using fly ash!
Ailek Giken's technology and service for non-destructive inspection of the grouting condition inside the lateral tightening sheath of existing PC bridges.
Registered in the new technology information provision system "NETIS" (NO.KT-090011-VE)
■Seismic reinforcement grout injection ■Small section spraying construction ■Small AC 100V power supply ■Mortar squeeze pump with hopper OKP-07ME
A mortar pump that combines adaptability to various job sites with high work efficiency.
A compatibility chart for 12 manufacturers and 49 products of on-site mixed grout mortar materials by mixer type has been completed!
A special hose for grout used in civil engineering and construction! It is transparent, allowing you to see the contents.
The Φ19 is available in a lineup of 5 colors: red, blue, yellow, green, and transparent!
Developed a safe flexible structure sluice gate that incorporates the advantages of conventional survey holes and grout pipes.
C-321, also known as JP-Roat, is a fluidity tester for PC grout.
Easy filling work underwater! A non-separating, hardening grout suitable for various repairs underwater.
We will shut out all leaks with our smart water-stopping method!
Shutting out water leaks from concrete joints! Underground waterproofing technology that supports structures.
Various thrust construction methods such as slurry type and soil pressure type! High swelling, high viscosity high-quality bentonite.
Contributes to improved work efficiency! A polymer-based additive with excellent solubility and thickening properties.
Optimal for mud pressure shield construction in high water content layers! Additive with water-resistant properties!
When excavating ground with high groundwater pressure! A mud material with excellent water-stopping effect to prevent eruptions.
Compatible with a wide range of soil types from clay layers to gravel layers! A material that enables the plastic fluidization of soil and sand.
The filling and unfilled status of the inner sheath grout can be measured non-destructively.
It is a concrete internal inspection device using wideband ultrasound.
It is a wideband ultrasonic testing device that can non-destructively measure the filling and unfilled conditions of internal sheath grout.
An insert for H-type propulsion Hume pipes, with threaded processing on both ends of the deformed rebar.
Cavity filling in areas in contact with water is also possible! Excellent filling properties ensure seamless construction.
Increase work efficiency with a small amount added! This is an integrated backfill admixture that allows you to easily create grout material.
A pre-mixed material (pre-mixed mortar) that can achieve the specified strength simply by adding water and mixing on-site.
We can carry out grouting work with uniform quality.
Mortar filling method. High fluidity, low heat generation, low shrinkage. Refregraut.
High-quality grout materials that meet the demands of an era that surpasses the concepts of traditionally developed materials!
It has good fluidity and reaches every corner of the filling area! It tightly transmits the load of the steel structure to the concrete body.
Prevent deviation of grout material! Gel-like, easy-to-handle liquid admixture for anchor grout material.
This is the KTB external cable construction method using "SC Unbond" with the latest corrosion protection technology.
Can be accommodated even in areas with a gentle slope.
This is a premixed non-shrink mortar that reduces cracking due to shrinkage after formwork removal and can be used in a wider range of applications than conventional products.
Quality is stable! Durability has been improved using modified fly ash CfFA.
By injecting KK grout mixed with rust inhibitor, macrocell corrosion is suppressed!
Easy to install and good workability! Prevents grout leakage.
Ideal for section water stopping at the joint of steel pipe sheet piles! A method for injecting and filling with grout material.
ST Micro Cap for rust prevention of lock bolt heads
Protective tube for external cables with improved durability and fatigue characteristics.
Permanent anchor method vs. VSL permanent anchor method
Deformation of the mountain retaining wall, measurement of lateral displacement in the ground! Capacitive roller inclinometer.
This is an ideal hot water supply device for winter mixing water supply. It is perfect for controlling the mixing temperature. It comes with a safe and reliable temperature control function and a drought sensor.
Sample distribution now available! Solving issues related to concrete reinforcement and cross-section repair. Demonstrating crack resistance and salt damage resistance, extending the lifespan of structures.
This is a new environmentally friendly system that does not generate dust or industrial waste (empty bags)!
The construction using the slurry supply system enables high-speed and large-volume pouring!
It is a filler material that contains calcium oxide-based expansion agents and has minimal volume reduction during drying!
High chloride ion penetration suppression effect, making it applicable to areas where salt damage is a concern!
It has high underwater non-separation performance and good fluidity, making it excellent for construction and filling!
The material properties are stable over the long term and are excellent in durability and weather resistance!
To demonstrate excellent fluidity, it is sufficiently filled even in fine gaps!
After hardening, there is no gap between the grout material and the structure, ensuring integrity.
High intensity and high fluidity! Exhibits excellent fluidity and can sufficiently fill fine gaps.
Ideal for pressure injection work with moderate viscosity! Grout material that can also be used for pump delivery and insertion.
Ideal for emergency construction with high-speed rigidity! Usable time is approximately 10 to 15 minutes.
There is almost no change in liquidity over time for up to 20 minutes after mixing! It is a product with minimal bleeding as well.
High-speed hard type allows for early release! Ideal backfill material for emergency construction and similar applications.
Strength of 10N/mm² or more is achieved 2 hours after injection! A grout material with rapid strength development.
Specialized company for non-shrink mortar injection work and grouting work!
"Water-stopping special grout mortar" enhances the water-stopping performance of pipe penetration backfilling to prevent water leakage accidents! Just mix and inject with the original packaging pack!
Sample available! Grout mortar that can be used just by kneading the bag by hand. Ideal for sudden water stop work and repairs.