This is an operating transformer (operating transformer/power transformer) compliant with the standard JEC-2200(2014) for a maximum voltage circuit up to 6.9kV.
This is a small connector with a screw diameter of 8mm. It is an ultra-small connector for communication and center use.
Easily "isolate" pipes and nozzles to significantly improve efficiency.
For safety checks! Easily test whether the electrical circuits are identical.
Leave the maintenance of electrical equipment to us.
It is a high-performance and highly utilized power supply that flexibly responds to a wide range of loads.
Flux cleaning for electronic circuits and components! A cleaning system that enhances not only high quality but also ecology and economy.
The measured silicon wafer is single crystal! The IPF map, pole figure, and inverse pole figure resulted in relatively simple outcomes.
This is a ground resistance meter that can measure ground resistance from 0 to 1000Ω with a one-dial operation for types A to D grounding resistance.
Please leave the design and manufacturing of the water-oil insulation tube to prevent insulation breakdown at the cable termination during the insulation breakdown test of the removed CV cable to us!
High-precision model compatible with SAASM, selectable CSAC (atomic clock) oscillator.
Measurement parameters: L, C, R (AC/DC), D, Q, ESR, θ. It is a compact handheld LCR meter.
The DW-3001 is a temperature calibrator designed with a compact and lightweight structure, allowing for calibration of digital thermometers with temperature sensors on-site.
[Made in the USA] Cable measurement can be performed without turning off the power, multifunctional, supports up to 600V. - General agent for the Asia-Pacific region.
A multifunctional device that integrates the capabilities required for network communication testing, useful for communication cables and network diagnostics - Asia-Pacific region general agent.
Industry first! Utilizing patented technology "SSTDR," it is possible to instantly detect abnormal points in live cables with 24-hour monitoring. Packed with features useful on-site!
Did the breaker trip again? You can easily check the cause and issues. Directly imported from America, easy to install, easy to handle, and features original measurement functions.
Connect the generator to the load testing device and run it in heat operation to discharge the accumulated carbon!
A long screw has been added to the Dsub9 core hood developed in-house by Aibix Giken.
Wiring continuity checks and ground fault detection are possible without inspection wires! *The HWC200 model has been discontinued. The new HWC300 model is currently on sale.
Introduction of the low-pressure load testing device 'L-15 (vertical type)' that has passed JESA's technical standards.
Introduction of the low-pressure load testing device 'L-3MC' that has passed JESA's technical standards.
Introducing our various products for the increasingly diverse electrical equipment!
Achieving further miniaturization and lightweight design! Wide-range high-precision multimeter.
Contact-type phase sequence detector that can determine the rotation direction of a three-phase motor.
The CT is a flexible type without a core, allowing measurements in narrow spaces by bending.
Faithfully reproducing the vibrations of cargo during transportation!
Nationwide support for those troubled by PCB-related issues. We offer same-day inspection and certificate issuance from oil extraction to removal and disposal, as well as new installation, providing a comprehensive proposal.
There is not much difference between 3D printers for casting and traditional casting methods using basic wooden patterns. Why not take the first step in utilizing them together with our company?
Recommended for those aiming to obtain the First-Class Electrician qualification after passing the Second-Class Electrician exam! We have received many orders since its release!
[Minimum and Lightweight Class, Easy Operation Settings] Ideal for business trips and travel, this lightweight handheld type is easy to carry. Body weight: 3.3 kg.
R&D small tabletop spin coater. Lightweight coater for MAX 2 inches. Built-in vacuum pump. Machine and equipment settings are easy to operate.
We provide reliable peace of mind with our abundant track record of construction achievements!
It is a DTMF tester that can also be used as a portable communication device.
Instant judgment, easily understood at a glance! This is a high-speed insulation resistance tester equipped with a comparator function.
We manufacture testing equipment related products such as brake control devices.
Easy operation! Evolved house automatic opening and closing device.
We will set various operational methods, investigate appropriate operational methods in advance, and make proposals!
An electronic breaker that significantly reduces the basic electricity charge.
Cooling down is possible in nearly half the time of other companies!
It is a leak detector that detects ultrasonic waves generated during leaks of gases and air.
This is a high-performance arbitrary waveform function generator that employs DDS technology with frequency bandwidths of 5MHz, 12MHz, and 25MHz.
This is an arbitrary waveform function generator that uses DDS technology with frequency bandwidths of 5MHz, 12MHz, and 25MHz.
This is an AC/DC withstand voltage/insulation testing machine that is safe and accurate, based on various global safety standards.
This is a temperature calibrator for infrared radiation thermometers designed with a compact and lightweight structure so that calibration can be performed at the work site.
The DW-3101 is a compact and lightweight temperature calibrator that also supports calibration at negative temperatures.
It is a pocket-sized foldable non-contact infrared thermometer/center temperature gauge that can measure surface temperature and center temperature.
It is an infrared radiation thermometer that can be easily used by anyone with one hand and supports a wide temperature measurement range of -50 to +1000℃.
The TM-206 is a solar power meter that can measure solar radiation intensity up to 1999 W/m² with range switching.
The TM-207 is a solar power meter that can measure solar radiation intensity up to 1999 W/m² with range switching.
The LA-1017 is a new type of solar power meter with added multimeter functions for measuring solar irradiance intensity.
It is an infrared radiation thermometer that supports a wide temperature measurement range from -50 to +1000℃.
The solar radiation intensity can be measured up to 1999 W/m² with range switching.
It is a solar power meter with added multimeter functions for measuring solar irradiance intensity.
It is a full-color handheld oscilloscope equipped with a DMM.
It is the most suitable tool for system maintenance inspections and for educational materials.
It is possible to connect to a computer for real-time measurement of electromagnetic waves and data analysis.
HARIO borosilicate glass Rashi Hilling glass. Please feel free to consult us about domestic quality, sizes, and shapes at our domestic factory.
Suitable for rapid charging of automated guided vehicles (AGV, AMR) and connection of exchangeable batteries with high current (rated 350A), 100,000 insertions and extractions, supporting both automatic and manual connections!
Not only manufacturing, but also a contract manufacturing service that can be utilized for parts procurement and inspection!
Production of measurement tools, RF measurement solutions, etc.! You can use our testing facilities!
Compliant with IEC61000-4-5 standards! We also offer separate support for ultra-high voltage lightning surge generators of 30kV and above.
Automatic control by software is possible! Introducing a high-voltage training device suitable for high-voltage experimental equipment.
Efficiently operate equipment! A system that automates measurements using a PC and allows for centralized data management.
Realize various functions! The applications are diverse when combined with other measurement system applications!
It is being introduced for purposes such as reducing operator workload, increasing equipment operating rates, and data storage!
Measure various data! You can achieve benefits such as improved operational efficiency and reduced workload!
You can evaluate malfunctions and degradation! By using G-TEMCELL, testing can be safely conducted even without a shielded room.
Prevent operator errors during testing! Improve test quality through consistently stable testing!
Efficient because multiple tests can be conducted at once! It is safe as there is no contact with moving parts or high-voltage circuits.
Accurate judgment by measuring thickness continuously! It can operate automatically, eliminating the need for manual measurements!
I have assembled a set of tools necessary for the electrical work technician skill exam.
Protect your cables from theft! 24-hour monitoring and analysis of cable status during power-on! Made in the USA, all-weather monitoring device for live cable fault measurement.
Detects faults, time, and frequency under live US-made cables. Supports up to 600V. It is equipped with many practical features required for cable diagnostics.
[Made in the USA] Easy to set up! Can diagnose and measure various types of cables with one device. - General agent for the Asia-Pacific region [Video available]
"Made in the USA" With enhanced functionality, more efficient and effective! The top model that supports network communication diagnostics and speed measurement.
Equipped with a full-color panel, this multifunctional integrated LAN cable tester allows for easy diagnosis and testing of LAN cables, ensuring network quality.
[Made in the USA] A dedicated inspection tool for coaxial cables with enhanced functionality, efficiently grasping signal quality! - Utilizing proprietary technology, American-made cable tester.
[Made in the USA] One device, eight functions! The Net Chaser is the industry's highest performance model, capable of diagnosing network communication conditions and measuring speed.
Decision to exhibit at the 4th Railway Technology Exhibition! Demonstration of Mantis (a device that protects cables from theft and monitors and analyzes the status of live cables 24/7) on-site.
A guide explaining the differences between fluorescent lights and LEDs, as well as between LED types that require electrical work and those that do not, brought to you by an electrical contracting company, plus special information available for a limited time on a first-come, first-served basis!
First come, first served! Special price campaign for LED products *Free LED guidebook included!
First come, first served! Special price campaign for LED products *Free LED guidebook included!
First come, first served! Special price campaign for LED products *Free LED guidebook included!
Achieve powerful deodorization and disinfection! Solve all your tank problems at once!
[News] There is a trend where qualification exam articles are popular among younger generations, while labor-related articles are favored by veterans and business executives.
Special price applicable! We offer products such as "NA10," which improves crimping quality, and "NA20," which enhances work speed and efficiency. *Video available.
Diagnosis of insulation degradation (water tree degradation) of 6kV class CV cables while live. High-precision insulation degradation diagnosis is possible using the AC superimposition method.
Work reservations are available 24 hours a day! We respond quickly to urgent renovation requests with cutting-edge technology.
Please leave the production of control panels, distribution boards, and power distribution boards to us.
Hydrogen is changing food safety! A high-performance leak detection machine aimed at reducing inspection time.
Introduction of the high-pressure load testing device 'H-80S' that has passed JESA's technical standards.
Introduction of the high-pressure load testing device 'H-80SP (split type)' that has passed the JESA technical standards.
Introduction of the high-pressure load testing device 'H-1MS' that has passed JESA's technical standards.
Introduction of the high-pressure load testing device 'H-1.5MS' that has passed JESA's technical standards.
Introduction of the high-pressure load testing device 'H-2MS' that has passed JESA's technical standards.
Introduction of the high-pressure load testing device 'H-3MS' that has passed JESA's technical standards.
Introduction of the high-pressure load testing device 'H-5MC' that has passed JESA's technical standards.