Can be manufactured as a product certified by the Minister of Economy, Trade and Industry! Medium-sized general industrial pressure regulator.
Meeting various needs for industrial gases! Supply pressure is 0.9 MPa, and capacity is 127 m³.
High-pressure gas and specific inert gas handling device equipped with a self-clearing function!
High-performance gaslon products with high temperature resistance, weather resistance, and rust prevention from -50℃ to +100℃! Suitable for environmental protection equipment and widely used in LP gas, ships, fuel piping, and more.
Maintenance-free, long-lasting dry piston pump. It has fewer parts, making it a low-cost, high-quality pump.
Large containers are widely used in the manufacturing industry for industrial applications with high LP gas consumption!
The size is approximately 135cm (height) × 150cm (diameter)! Meeting various needs for industrial gas.
It is a lightweight and user-friendly refrigerant that is also environmentally friendly because it is collected after use.
Active even during earthquakes and disasters! Urban gas generation equipment prepared for the early restoration of urban gas lifelines.
A refrigerant detection gas sensor module that detects leaks of refrigerants that affect global warming!
"Hide the gas meter." The gas meter detracts from the first impression of the house... a gas meter cover to solve the incongruity around such buildings.
We will introduce a variety of polyethylene pipes and fittings from the Mitsui Chemicals Group, including spigot fittings.
Reliable protective performance! Simply wrap it once around the polyethylene pipe to complete the installation, reducing construction time.
High purity and clean state compression is possible! Leak-free diaphragm compressor.
High versatility! General industrial pressure regulator for container mounting.
With gauge guard! A general industrial pressure regulator used for installation at the end of piping.
Stable gas supply! Pressure regulator with electric heater for warming gas on the inlet side.
High pressure use! General industrial pressure regulator that can be manufactured as a product certified by the Minister of Economy, Trade and Industry.
Design focused on safety! Pressure regulator for corrosive gases with corrosion resistance.
Balance type! Pressure regulator for analytical instruments that can be manufactured as a product certified by the Minister of Economy, Trade and Industry.
Pressure regulators for line use that can be manufactured as products certified by the Minister of Economy, Trade and Industry for various gas centralized supply!
Since it does not use electricity, it is suitable for flammable gases such as ethylene! Gas can be supplied stably.
Equipped with a power outage bypass circuit! The gas supply line is divided into two series, supplying gas from either one of the series.
Demonstrates outstanding economic efficiency! Due to its aluminum star fin structure, it excels in low-temperature strength.
"What is a gas automatic switch? The benefits of automating gas switching" and other basic knowledge related to gas switching are also included! We are currently offering materials for gas switching automation.
Specifications for a compact, cost-effective catalytic combustion exhaust treatment system that can be operated safely and easily with remote autonomous driving at sterilization work sites!
Combustion treatment utilizing the activity of ceramic catalysts! An introduction to the device overview and design specifications.
Kitchen Use Residential Fire and Gas Leak Combination Alarm, Wall-Mounted, XW-103GK-1
Obtained domestic explosion-proof (TIIS) certification! Robust design for gas flow measurement and control in hazardous locations! *Catalog giveaway ongoing.
Generates up to 670,000 ppm of HHO gas at a rate of 700 to 3,000 cc per minute, allowing for efficient inhalation even in a short time.
For use in anchor construction and collection and drainage hole boring! Introducing our handled products.
Excellent corrosion resistance! The female thread side has a flexible mechanism design, allowing for reliable installation.
No leaks up to an air pressure of 0.5 MPa! Lightweight and compact gas insulation joint.
Reduce noise! Line up silencers for atmospheric release and for lines.
This one unit is fully automatic! With refrigerant gas cleaning, cooling efficiency is improved! Energy-saving and fuel-efficient!
Our wish is to create a sustainable and happy society together with everyone.
Choose according to each application! A lineup from small to large.
Built-in check valve! Ultra-compact design allows for space-saving storage.
We have earned the trust of customers nationwide in Japan and have built a long track record of achievements over the years!
A backflow prevention valve that can be used in gas piping for combustion equipment such as city gas and LPG. It operates at low differential pressure and prevents the backflow of combustion air.
Improved safety, workability, and environmental performance! With the power of hydrogen, we are advancing to the forefront of manufacturing!
A step ahead of the times. Fujiox connects customers with "gas" through comprehensive strength.
Achieving a low dew point below -80℃ and a low oxygen concentration below 0.5ppm. Flexible options available including integrated, separated, and individual sales.
You no longer need high-pressure gas cylinders! Factory air can be pressurized.
High-pressure gas cylinders are no longer needed! Factory air can be pressurized.
High-pressure cylinders are no longer needed! Factory air can be converted to high-pressure dry air.
Nitrogen cylinders are no longer needed! High-pressure nitrogen can be supplied from the air.
It accommodates various flow rates and maintains the highest level of purity in the gas supply system.
A flexible plant that can use various types of plants! The production amount of biochar can also be adjusted.
FIS gas sensor with high sensitivity to various gases such as CO, hydrogen, and organic solvents!
Achieve high measurement accuracy with semiconductor gas sensors and original columns!
A unique gas chromatograph that achieves high-speed separation and high-sensitivity measurement!
With a single touch, the gas flow is perfect! It can be set quickly, saving both time and gas.
The blower is shared with the denitrification system! When switching to sulfuric acid pickling, remove sulfuric acid mist from 100 mg/m3 to below 5 mg/Nm3.
A delivery case of a mist eliminator with a design removal rate of over 99% for particles larger than 20μm and a processing gas volume of 290m³/min.
The processing gas volume is 1160 m³/min, and the salt recovery concentration is 200-260 g/L. Removal is done using brine (circulation + replenishment)!
For all your high-pressure gas and plant piping design and construction needs, trust Yamako!
A good environment creates a good future! Our mission is to create the cities of tomorrow and continue running together.
A wide variety of gas piping fittings, including anti-corrosion threaded joints, insulated joints, and anti-corrosion mechanical joints, are listed.
For repairs and insulation treatment of leaks from various pipes such as water supply, hot water, air, steam, and gas!
BraveBridge Monitoring Service with excellent installation capabilities and high expandability.
We introduce a variety of gas piping materials that are easy to maintain and flexible pipe fittings with a valley seal method.
Applicable even for dirty gas! A compressor with excellent reliability, durability, operability, and economy.
Improved insulating material! Adopted GYLON-made ID labels on the inside to cover the metal core.
A general-purpose oxygen hose reel suitable for welding and cutting steel materials!
Compact design! General industrial pressure regulator with a lock nut that prevents the handle from loosening.
Built-in safety valve! A universal ultra-compact regulator that can be used simultaneously when opening the cylinder valve.
Built-in safety valve! Medical regulator that can be used simultaneously when opening the cylinder valve.
Utilization of thermal energy from the atmosphere! A finned pressure regulator that can supply gas stably.
Optimal for medium scale! Pressure regulators that can be manufactured as products certified by the Minister of Economy, Trade and Industry.
Push screw type! A large flow regulator for devices that can be used in a wide range of -60 to 40℃.
Pilot type! High flow regulator for devices that can be manufactured as products certified by the Minister of Economy, Trade and Industry.
Pilot model! High-pressure large flow regulator that can be manufactured as a product certified by the Minister of Economy, Trade and Industry.
For ultra-high pressure! General industrial pressure regulator with built-in vent valve (bleed type).
Reduce unnecessary gas by up to 1/6 to save on gas costs! Easy installation! For back seal welding! We are currently running a visit demo and demo equipment loan campaign!
Quickly detect tremors from earthquakes and shut off gas supply! Prevent secondary disasters caused by gas leaks! Shut out dangerous gas!
Balance type! High flow regulator for devices that can be manufactured as Minister of Economy, Trade and Industry certified products.
Screw-type! A large flow regulator that can be manufactured as a product certified by the Minister of Economy, Trade and Industry.
Pilot type! High flow regulator for devices that can be manufactured as products certified by the Minister of Economy, Trade and Industry.
Pilot model! High-pressure large flow regulator that can be manufactured as a product certified by the Minister of Economy, Trade and Industry.
Pilot model! High-pressure large flow regulator that can be manufactured as a product certified by the Minister of Economy, Trade and Industry.
Balance type! Pressure regulator for analytical instruments that can be manufactured as a product certified by the Minister of Economy, Trade and Industry.
Balance type! Single-stage pressure regulator for devices that can be manufactured as Minister of Economy, Trade and Industry certified products.
Stable supply possible! High-pressure single-stage pressure regulator that can be manufactured as a product certified by the Minister of Economy, Trade and Industry.
Compact and high-pressure large flow! A balanced pressure regulator that can be manufactured as a product certified by the Minister of Economy, Trade and Industry.
For centralized supply of various gases! A line pressure regulator that can be manufactured as a product certified by the Minister of Economy, Trade and Industry.
Pressure regulators for line use that can be manufactured as products certified by the Minister of Economy, Trade and Industry for various gas centralized supply!
Pressure regulators for line use that can be manufactured as products certified by the Minister of Economy, Trade and Industry for various gas centralized supply!
Stable gas supply is possible! A two-stage pressure regulator that can be manufactured as a product certified by the Minister of Economy, Trade and Industry.
The gas supply system automatically switches over, ensuring peace of mind even at night! Eliminates gas outage troubles!
The nut can be tightened with just one wrench! It prevents screw seizing and galling.
"What is a gas automatic switch? The benefits of automating gas switching" and other basic knowledge related to gas switching are also included! We are currently offering materials for gas switching automation.
Introducing products that contribute to saving gas costs and extending product lifespan! We are also offering materials that include information on topics such as "the benefits of automating gas switching."
Non-welded! Expansion joint that can be manufactured with short face spacing!
Introducing an exhaust gas treatment system that achieves stable processing performance and high processing efficiency, with less than 1 PPM upon delivery!
Selectable according to the case! Even with different fire resistance times, it can be accommodated with the same joint width and the same installation.
A gas leak detector can be installed in the ceiling from indoors. / New product for gas leak detector fittings.