New lightweight pre-mixed mortar for wooden buildings that can be applied with a brush and pumped.
It suppresses rebar corrosion and keeps the concrete in a sound condition.
Safe with plaster and inorganic finishes! Unprecedented stability has received high praise from plasterers!
Preventing fine cracks and surface contamination of the foundation, which had been problematic in residential foundation finishing, and suppressing the neutralization of the foundation concrete to improve the durability of the foundation.
Products that meet the leaching test standards established by the ministerial ordinance on technical standards for water supply facilities.
High durability early strength RC slab surface repair material
Exhibits stable performance over a long period! Excellent durability and weather resistance.
This is a new lightweight pre-mixed mortar for wooden houses that overcomes the weaknesses of sand mortar.
High-speed hardening, high fluidity, and non-shrinkage. Ideal for rapid construction and shortening construction time.
Ras method, non-Ras method, ventilation method compatible, non-combustible, thermal insulation, lightweight mortar.
It is possible to reduce the maintenance costs of concrete floor slabs with durability and repair effects more than four times higher than conventional methods.
Type for preventing the decrease in hollow filling material level
Cement mortar developed for the ventilation method of wooden house exterior walls! Fire-resistant structure, 45-minute quasi-fire-resistant structure, and 1-hour quasi-fire-resistant structure certified by the Minister of Land, Infrastructure, Transport and Tourism.
Uses high-performance powder polymer! Excellent adhesion to existing concrete, achieving integration.
Simple mixing work! Introduction of a polymer-cement-based surface repair material with high crack resistance.
Single-material cationic polymer cement-based substrate leveling material, compliant with JIS A 6916 C-1 standards.
Single-material cationic polymer cement-based substrate leveling coating, compliant with JIS A 6916 C2 standards.
The polymer-cement-based repair material "Cementex Method," which has supported renovation work with trust and proven results, protects buildings from neutralization, deterioration, and salt damage.
This is an introduction to mortar for finishing the concrete foundation surface of general wooden buildings.
It follows the deformation of the insulation substrate and the movement of the structure, serving as a cushioning material.
Brush finishing and pressure finishing made easy! Ideally formulated pre-mixed mortar for foundations.
Guide to the Exterior Products Comprehensive Catalog
【Free samples available!】Emergency construction water-stopping mortar, for temporary fixing of stone materials and stone paving!
Easy to apply thick layers! A repair material that excels in strength development, adhesion, durability, and is also environmentally friendly!
It has extremely low shrinkage, excellent adhesion and waterproof properties, making it ideal for construction work such as water stopping and filling.
We have published examples of dry spray application methods used in bridge-related and tunnel-related construction projects!
"FB Protect" is a protective material for the interior of residential foundations, developed by Takeya Chemical Research Institute, consisting of a two-component, pre-mixed micro-elastic polymer cement mortar.
Solving the hidden issues of long-term excellent housing. Our FB Protect offers protective coatings that suppress carbonation and improve durability by protecting the interior of concrete.
About three times the work efficiency of regular mortar work! It has excellent fluidity and can be easily leveled to a flat floor surface with a finishing trowel or similar tool.
Due to the absence of bleeding and settlement, there are no voids left after filling, ensuring reliable load transfer.
It has excellent fluidity and can fill complex shapes and voids, such as those in chiseled concrete, thoroughly.
Since the temperature stress of the material decreases, temperature cracking is suppressed.
Emergency construction, requiring early traffic opening for manhole raising. NEW Filcon M.
We can carry out grouting work with uniform quality.
By mixing within the specified range of water volume, stable non-shrinkage is maintained.
For grouting work that requires high intensity in a short time. Long-term strength is also consistently achieved.
High-performance special powder resin and special short fibers are premixed.
Excellent acid resistance, suitable for plastering work, and also applicable for spraying. Repair material specifically for concrete.
For emergency construction. Achieves practical strength in a short time, with excellent adhesion. Refremolset M.
It achieves practical strength in a short time, has low shrinkage, and excellent adhesion properties.
For the primer of cross-section repair materials. Stabilizes the adhesion of mortar. Excellent water absorption prevention effect.
Excellent self-leveling properties, excellent durability. Self-leveling mortar.
Industry first! Low-carbon cement material that reduces CO2 emissions by 32% compared to conventional products.
Crack-reducing fiber-reinforced non-shrink mortar
We offer two types according to the temperature! It can reach narrow spaces and ensure reliable filling.
Achieves practical strength in 1 to several days! Capable of filling complex-shaped voids thoroughly.
Excellent fluidity allows for complete filling of complex shapes and voids, such as those in chiseled concrete!
Ideal for shortening construction time! A simple air mortar that only requires mixing with water, lightweight and excellent in fluidity.
It is possible to reduce the maintenance costs of the floor slab with durability and repair effects more than four times higher than conventional methods!
Special dust-proof agents are used during manufacturing! In mixing and injection work with non-shrink mortar, it is possible to reduce the dispersion of dust.
Temperature stress is reduced, making it possible to suppress temperature cracking! Low-carbon cement material that reduces CO2 by 32% compared to conventional materials.
Excellent fluidity allows for complete filling of complex-shaped voids! The temperature rise of the components will be minimized.
Excellent moldability! It demonstrates stable adhesion strength to liner plates, existing concrete, and more.
Long-term strength is also stably exhibited! Suitable for emergency construction under time constraints or while traffic is open.
Achieves practical strength in just a few days! A special blend of non-shrink mortar mixed with nylon fibers.
It is possible to carry out grouting work with uniform quality! It excels in pumpability and self-leveling properties.
Even at a mother material asphalt concrete temperature of 60 to 80°C, it reliably penetrates the gaps! It maintains stable strength over a long period.
Lightweight at approximately 1.4 g/cm³ and designed for a compressive strength of over 3 N/mm², suitable for application in upper roadbeds!
Finishing materials such as lining can be applied 1 to 2 days after construction! It has low shrinkage and excellent adhesion.
Achieves practical strength at an age of 1 to 1.5 days! It has high adhesion and prevents peeling.
High-performance special powder resin is blended! It has excellent adhesion to existing concrete and ensures integration with the substrate.
Exhibits stable strength over a long period! Excellent adhesion, allowing integration with existing concrete.
Ideal for primer for cross-section repair materials! It has stable adhesion strength even at low temperatures (5°C).
Exhibits excellent bubble suppression effects and improves surface accuracy! The water-reducing effect is significant, and drying shrinkage is reduced.
Smooth trowel finishing is possible! It prevents the occurrence of hair cracks due to rapid drying.
It has good fluidity and can be pumped! It is excellent for use in large cross-sections.
Just mix it with water on-site! It shows significantly higher salt resistance compared to concrete structures.
Nitrite-based rust-inhibiting one-component polymer cement paste "Nitrite-based rebar rust inhibitor"
Vinylon fiber reinforced polymer cement mortar
Ideal for sectional repair, mechanical foundations, and seismic reinforcement! Non-shrink mortar with no breathing.
Suitable for thin plastering methods. Also for tile substrates. Contributes to shortening construction time and is economical.
It can be used as a filler for voids and defects in concrete structures.
It can be used as grout material under steel columns, mechanical structures, and steel structures.
It can be used as filling material for steel plate roll-formed products and as filling material for PC board joint sections.
It can be used as filling material for steel plate roll-formed products and for cotter segment filling materials.
It can be used for surface preparation and various fillers for deteriorated concrete anti-corrosion treatment construction.
Achieves a thin, lightweight design with excellent fire resistance! It also meets design requirements.
Easy to apply and efficient! Lightweight premixed mortar.
Improved work efficiency! Easy-to-apply lightweight premixed mortar.
Factory pre-mixed product! Mortar for undercoating with stable quality.
Ideal for block, foundation, and RC! Substrate leveling sand mortar.
Prevent the occurrence of efflorescence! Waterproof base mortar that eliminates water absorption.
Asbestos-free! Substrate leveling material mixing agent
A high-quality finish that expresses sedimentary rock in fine detail! A rich variety of colors is available.
Contributing to the maintenance of concrete structures! Construction materials with a mix that can choose high-quality sand as aggregate!
Achieving low shrinkage through high density and special formulation, we provide shortened construction periods and unprecedented workability.
This is a premixed non-shrink mortar that reduces cracking due to shrinkage after formwork removal and can be used in a wider range of applications than conventional products.
It has excellent early strength and is suitable for repair work on structures that require early release.
For thick application! A cross-section repair material with good trowel finish properties that can be applied using either plastering or spraying methods.
Shortened construction period and urgent work! Fast-setting premixed mortar.
Walkable in 1 hour!! Just apply water for a beautiful finish.
Just mix with water! A pre-mixed type that can be used for various purposes.
For filling holes such as those from P-connections. Fast-setting, non-shrink polymer cement mortar.
It has extremely low shrinkage, excellent adhesion and waterproofing properties, making it ideal for construction work such as sealing and filling.
Just mix with the specified amount of water on-site! You will obtain high-quality non-shrink mortar.
Excellent separation and reduction effect! Minimizes water quality pollution in the construction area.