See Steel, non-ferrous metal materials, scrap's detailed category ranking
An evolved version of the wire grip! Installation is very easy, and it also allows for adjustment of rope length.
Skeleton-style steel stairs start from around 300,000 yen. We want as many people as possible to experience a life with stairs at the center of their living space.
For floor structures under heavy load conditions such as factories and logistics warehouses!
Flexible response to the diversification of civil engineering and construction technology! It is a welding joint method for reinforcing bars.
We offer a variety of products, including defense ministry-type handholes and general-type handholes.
Acquired JIS A 9401! Central separation zone block made from recycled plastic materials.
Available for use as concrete formwork! It can be widely used as interior lining and flooring material for cold storage warehouses!
Good Design Award winner! A hand hole that achieves thinness and lightweight design.
This is a "cage frame" suitable for applications such as earth retaining walls and hillside earth retention works. [Crushed stone can be used]
High weather resistance and corrosion resistance, along with a richness of colors! General-purpose acid-resistant coated steel sheet.
Structural double-thread anchor bolt set JIS B1220 ABM/ABR
Compared to ordinary rebar (SD bar), the design stress can be increased up to four times, significantly reducing the amount of shear reinforcement used.
Explanation of the 4-sided box, differences from columns, and compatibility.
The B series proposes the lightweighting of small beams, while the L series enables replacement with welded lightweight H-shaped steel.
Delivering reliable products as a specialist in steel processing. Supporting tomorrow and bringing prosperity to society.
L-shaped parapet blocks that enable elevation by being installed on top of levees and tidal barriers.
Mainly used in concrete formwork deck structures, etc.! V-shaped decks and U-shaped decks are available!
Next-generation ceiling lighting that replaces mercury lamps, brightly illuminating even dark work areas.
A hydrogen burner equipped with a waste heat recovery device has arrived! Not only does it contribute to decarbonization through hydrogen combustion, but it can also reduce fuel usage by approximately 30% thanks to its built-in heat exchanger.
Netsuren's "PC steel bars" have contributed to the high strength of concrete products for over half a century.
Achieving high quality at low cost! Rational and highly economical column materials.
What are BCR and BCP? An explanation focusing on the differences between the two types of standards! We will also introduce the replacement with SHC.
Stretcher guard with double the width of competitor products! Reduces impact and damage to walls and panels! The collision surface is made of stainless steel, preventing wear and contamination.
It is possible to minimize and finish the rising and sinking of the floorboards flat with a construction method that has few irregularities. We can propose SUS flooring tailored to specific applications such as edge finishing.
A wide range of steel sheet piles, H-beams, formwork panels, and retaining materials are available from our company!
"Can accommodate penetration hole diameters exceeding 1/2 the height of the beam" Achieved a "thinner" fireproof coating thickness for steel beam penetration holes!! (1-3 hours fire resistance: thickness 12mm)
Fire-resistant wall structure certification! Fire-resistant wall structure system exclusively for metal exterior materials (corrugated finish).
NETIS registration! This is a spacer that can provide excellent quality consistently.
Most are manufactured using an accelerated cooling process! They are applied to various buildings.
L-shaped drainage ditch according to JISA5372 Appendix E recommended specification E-4 and JISA5371 Appendix C recommended specification C-1.
Disaster toilets installed in evacuation shelters during emergencies.
Unique Z-shaped steel! Due to its large cross-sectional performance around the Y-axis, the pitch for buckling restraint can be increased!
Solving labor shortages: Usable as concrete formwork! Lightweight with high workability, achieving savings in construction time and costs.
It can sufficiently withstand the weight of the poured concrete.
Fun-designed play equipment that stimulates children's creativity in play.
![logo[2].png](https://image.www.ipros.com/public/company/image/3fc/19640/IPROS55447699742975560637.png?w=280&h=280)
List of Corner Pipe and Round Pipe Molding Types
The high-temperature gas burner series now includes a hydrogen combustion specification! It can be used in various industrial furnaces due to its tile top.
Leave it to us for thick plates, thin plates, steel construction materials, BH business, and seismic isolation base plates!
A wide lineup centered around steel electrical conduits and accessories!
What is the cross-sectional performance of square steel pipes? We will also introduce the corner shapes related to the standards for cross-sectional performance.
Leave construction materials and construction work to us.
We offer a standard measurement menu for measuring the spectral transmittance and reflectance of materials, as well as the scattering characteristics of transmittance and reflectance.
Swedish steel's Hardox wear-resistant steel plate is the world's leading wear-resistant steel plate.
Non-Crave is an admixture developed for high-strength concrete.
Lightweight and durable! We provide the components used as support pillars for the rack on a part-by-part basis.
Three types of sets are lined up! We issue product inspection certificates to guarantee quality.
Consistent production system! A large formwork combining self-processed wooden circular molds and steel processing.
With years of experience, we handle all types of formwork construction.
We will consistently carry out the outline design of simple and continuous post-tensioned beams, pre-tensioned beams, and composite beams.
A finish without unevenness, pursued for beauty.
Our imported PC steel wire is a high-quality product certified by JIS, which can contribute to your company's safe and secure manufacturing.
Not fixed at the tip of the bolt, but securely on the surface! A lightweight yet sturdy clamp made of aluminum alloy die-cast.
No grout material needed for easy installation! A compact and well-fitting mechanical rebar joint.
High-strength steel suitable for a wide range of applications! Strength classes are available from 540 to 950.
For storage, transportation containers, chemical industrial equipment, and pressure vessels such as liquefied natural gas!
We respond to your requests with a consistent system from design to production and installation work!
Improvement of safety measures for road accessories! Products related to sound barriers that prevent secondary disasters.
We have successfully constructed a simple girder bridge with a width of 52.1 meters, which we take pride in on a global scale.
This is the reinforcement of the KTB external cables using corrosion-resistant PC steel materials that have obtained construction technology examination certification.
[New Arrival] A fitting that allows for easy installation of a screw-in piping connection.
Large reinforced concrete flume used in water channels according to the Agricultural Civil Engineering Association standards.
A drainage flume with a high water collection function in a comb-type design.
It is often used for slabs that cross waterways, such as roads and farm roads.
For various substrates, factory and warehouse buildings, duct hanging materials, and more! It meets JIS G 3350 standards!
Even for indoor exposure use, aesthetic considerations are taken into account! The unique "X Emboss" design can be used without any sense of discomfort!
The V50 deck enables the realization of roofs with a small penetration width for insulation materials! A roof that can prevent leaks!
Using MA deck (43,000m2) with high load-bearing fire resistance certification.
The definitive cap for drainage covers that combines safety and aesthetics!!
Compliance with total chloride content regulations for concrete! Mortar and concrete for cold-resistant freezing.
Lightweight, strong, and high fatigue strength! A bridge product that can be easily and reliably installed on-site.
Excellent through-hole reinforcement method
We will propose a "wooden bridge" that blends with the natural landscape, tailored to your desired scale and design.
It can be used for temporary rust prevention after pickling and for rust prevention after phosphate coating treatment!
Can manufacturing, sheet metal, welding, painting, plating
Simply replace the existing screws! A product with high design and security features.
In addition to excellent heat treatment technology, we conduct strict steel selection to manufacture drift pins.
A manual digital length measuring device compatible with all cutting machines, improving accuracy and efficiency.
Shortened the gear manufacturing process by 1/4! Reduced bending and impact stress by 15%! *Exhibited at the Automotive Technology Exhibition.
Ideal for biomass power generation! Power converter storage container supporting the power generation system.
GTL technology, natural gas-based "low environmental impact" motor oil. Long-lasting lubrication, cleaning, cooling, strong sealing, ignition temperature 230°C, non-combustible material, biodegradable.
This is software for the seismic diagnosis of RC/SRC buildings and comprehensive seismic diagnosis of RC/SRC/S buildings.
Small High-Temperature Electric Furnace 'FT-107FMW'
Rapid heating to 1,550°C in 30 minutes! High-performance tabletop high-temperature vacuum atmosphere furnace with space-saving and energy-saving design.
Excellent temperature stability with PID auto-tuning! A pot furnace that allows for easy operation and retrieval of samples from the top, providing a simple atmosphere!
It enables larger machine designs, which also leads to increased productivity for agricultural workers!
A completely new plating steel sheet finish using the front patent finishing method "FRONT CRAFT"!
Introducing our "Horizontal Machining Center" with a maximum load capacity of 5 tons!
Our pillar pipes are widely used as columns in famous buildings!
For signposts, lighting poles, etc.! We are confident in our lengths, with a lineup ranging from 5.5m to a maximum of 12m.
Numerous processing achievements as pillars and roof trusses for famous buildings! Confident in immediate delivery and special processing.