Transparency, weather resistance, heat resistance, strength, all balanced low-viscosity epoxy resin.
It is a low-viscosity epoxy resin for laminating with high transparency. It also has resistance to yellowing due to ultraviolet light. The curing performance at room temperature is also good. The heat resistance is up to 100°C (after secondary curing). It is a resin that combines transparency, heat resistance, and strength. It is recommended for hand lay-up, infusion molding, and repairs of carbon products.
Inquire About This Product
basic information
Mixing ratio: Base 3 : Hardener 1 (weight ratio) * The mixing ratio is quite critical, so please measure accurately by weight. * Insufficient mixing can cause poor curing. Please stir thoroughly until fully mixed. Usable time: 120 minutes (25℃) Mixing viscosity: 700 mPa·s (25℃) Room temperature curing conditions (heat resistance 50℃): Cure at room temperature 25℃ for 24 hours (approximately 90% cured) Cure at room temperature 25℃ for 7 days (approximately 100% cured) Secondary curing method (for heat resistance) (heat resistance 100℃): After curing at room temperature 25℃ for 16 hours, cure at 100℃ for 3 hours. For the release treatment of epoxy resin, please use Mold Coat S.
Price range
Delivery Time
Applications/Examples of results
CFRP lamination, infusion molding, repair
Company information
Sunlight Co., Ltd. has a wide range of materials necessary for FRP molding. Please feel free to contact us, especially for materials related to FRP parts for automotive and motorcycle exteriors.
