It has two cutting modes, normal mode and high mode, and also features an automatic adjustment function (T.A.F circuit).
■Minimizing melting to the utmost: T.A.F circuit The ultrasonic cutter adjusts its cutting performance (input to the transducer) based on the load on the blade during cutting (such as the hardness, thickness, and melting state of the object, the user's force application, and the angle at which the blade is applied). - When the load is high: High cutting performance (input to the transducer) - When the load is low: Low cutting performance (input to the transducer) The ultrasonic cutter is a tool that cuts while vibrating. During cutting, frictional heat is generated due to the vibration of the object being cut and the blade. This has been adopted as the best driving method currently considered, reflecting the user's desire to reduce melting caused by this frictional heat. ■No need to hold the button down? Want it to operate only while pressed? In response to user feedback that it is difficult to work while holding down the button, the conventional model introduced an operation method where the handpiece switch operates for 10 minutes after being pressed and released. (Pressing it again will stop it.) Since it continues to operate even when the finger is released, there are also requests to have it operate only while the button is pressed, similar to the conventional model. Therefore, the M2745EK-412E allows the user to choose either operation mode when powering on.
Inquire About This Product
basic information
- Turn on the power without doing anything >>> The device operates for 10 minutes after pressing and releasing the switch. - Turn on the power while pressing the handpiece switch >>> The device operates only while the handpiece switch is pressed (however, it will turn off every 3 minutes for temperature checks). ■ Equipped with a temperature sensor for transducer protection High power mode has been added. In high power mode, when the load is large, power is input close to the limit of the allowable input for the ultrasonic transducer. To prevent thermal destruction of the ultrasonic transducer due to friction heat with the cutting material and self-generated vibration heat, a protection sensor has been installed that stops operation when the temperature inside the handpiece rises to a certain level. *In the new operation method for M2745EK-412E, continuous pressing of the handpiece switch does not allow for temperature monitoring, so the maximum time for pressing the switch is set to 3 minutes. ■ Variable power It is possible to switch between two modes: the normal mode for regular use and the high power mode for critical situations, using the switch on the side of the main unit. The high power mode may overheat in about 5 minutes, depending on the cutting material.
Price range
Delivery Time
Applications/Examples of results
Cutter
Company information
Introducing measuring instruments, packaging materials, and logistics equipment. We always deliver a new lineup of products! We provide information on special deals, such as manufacturer collaboration products, as well as limited-time and limited-quantity items.