Electric hot water bath type No. 16 to No. 24 (heating and cooling compatible)
EB type No. 16 to No. 22 (Electric hot water boiling type)
It is possible to stir and grind while heating with a built-in heater by attaching a heating and insulation jacket to the mortar.
【Features】 - Capable of processing under heating and cooling conditions, maintaining the characteristics of the Ishikawa-style stirring and grinding machine. - Equipped with a double pot (jacket) for heating and insulation, allowing for uniform heating of the porcelain bowl from the outside by adding hot water while performing stirring and grinding. - Further temperature increase inside the porcelain bowl (mortar) is possible with oil heating. - By filling the double pot with cold water or supplying and circulating cold water from an external chiller, stirring and grinding can be performed while cooling the porcelain bowl from the outside (in the case of cooling, additional measures may be required depending on the usage environment to prevent condensation). - By installing a thermostat as an option, it is possible to control the on/off of the built-in heater's power for insulation. - Since processing can be done under heating conditions, drying and concentration times can be shortened. - The power supply can accommodate both single-phase 100V and three-phase 200V. 【Suitable Use Cases】 - Heating allows for simultaneous dispersion, kneading, concentration, and drying of slurries, pastes, and colloids, enabling fine grinding without solidifying the materials. - Simultaneous grinding and breaking of powder particles during heating also allows for the removal of moisture from hydrates, facilitating drying.
Inquire About This Product
basic information
**Features of the Ishikawa-type Grinding Machine** The following features are available: (1) Uniform and consistent mixing and grinding treatment within the bowl due to unique design (2) Simultaneous mixing and grinding processing is possible (3) High driving torque allows for processing of high-viscosity materials (4) Lower processing energy compared to ball mills, enabling "mild processing" This product retains the basic performance of the Ishikawa-type grinding machine while allowing for processing with heating and cooling. There are five models of this product: Size Processing Volume Heater - Model 16: 0.4L 0.6kW - Model 18: 1.0L 1.0kW - Model 20: 2.0L 1.0kW - Model 22: 4.0L 1.0kW - Model 24: 7.0L 1.0kW **Introduction to the Testing Laboratory** You can use the experimental machine for free to evaluate the functions and performance of the Ishikawa-type mixing and grinding machine. Additionally, our staff, who are well-versed in mixing and grinding processes, will support your experiments based on your requests. Furthermore, we will propose the optimal selection of the Ishikawa-type mixing and grinding machine and processing methods for your needs. Please feel free to utilize this when considering your options.
Price range
Delivery Time
Applications/Examples of results
- Electronic component materials - Conductive ink, conductive adhesive - Insulating materials, sealing materials - Pigments, glazes - Metal (gold, silver, copper) paste - Glass paste - Secondary batteries - Carbon paste - Lithium battery materials, electrode materials for all-solid-state batteries - Dispersion of carbon nanotubes - Ceramic materials - Grinding wheels, abrasive grains, polishing agents - Food (miso, sweet red bean paste, spices, sesame, etc.) - Pharmaceuticals, ointments - Chemicals, cosmetics - Chemical and fiber materials - Equipment and devices for research and development - Stirring, grinding, dispersion, and kneading processes in universities and research institutions
Detailed information
-
(1) Model 16EB - Processing volume: 0.4L - Device width: 510mm - Device depth: 510mm - Device height: 1260mm - Power supply: 100V 0.2kW - Heater: 0.6kW (2) Model 18EB - Processing volume: 1.0L - Device width: 510mm - Device depth: 510mm - Device height: 1380mm - Power supply: 100V 0.2kW - Heater: 1.0kW (3) Model 20EB - Processing volume: 2.0L - Device width: 610mm - Device depth: 610mm - Device height: 1470mm - Power supply: 100V 0.2kW - Heater: 1.0kW (4) Model 22EB - Processing volume: 4.0L - Device width: 610mm - Device depth: 610mm - Device height: 1550mm - Power supply: 100V 0.4kW - Heater: 1.0kW (5) Model 24EB - Processing volume: 4.0L - Device width: 610mm - Device depth: 610mm - Device height: 1550mm - Power supply: 100V 0.4kW - Heater: 1.0kW
catalog（3）
Download All Catalogs
![[Comprehensive Catalog] Ishikawa-style Automatic Mortar and Pestle, Ishikawa Factory Co., Ltd.](https://image.www.ipros.com/public/catalog/image/01/007/759980/IPROS34813853649088932578.jpeg?w=120&h=170)
Company information
Our company is a specialized manufacturer of mixing and grinding machines. The feature of the Ishikawa-type mixing and grinding machine is that it can simultaneously perform "mixing," "grinding," "blending," and "kneading" in one device, allowing for synergistic effects. Mixing and grinding means performing crushing processes (milling, crushing, mechanical alloying, mechanochemical reactions) and mixing processes simultaneously. With a unique design, it achieves an ideal grinding trajectory, making it a unique machine capable of uniform mixing and grinding processing. 1. Mixing and Grinding (Basic Function) ★ Applications include dewatering of alloys and hydrates, artificial bones, artificial teeth, salt milling (nano-dispersion of organic pigments), chemicals, ceramic grinding, grinding wheels, metal pastes, CNT adhesives, ointments, soba noodle making, particle surface treatment, and more. New functions can be realized by adding the following additional features. 2. Temperature: ★ High-temperature kneading for semiconductor heat sinks and 3D printer resins. 3. Temperature & Vacuum: ★ Evaporator for slurries. ★ Substitute for spray dryers at laboratory levels. ★ Freeze-drying (not only freeze-drying functions but also rapid powdering). 4. Isolation and Sealing: ★ The tabletop model from Ishikawa Co., Ltd. features an acrylic cover that prevents dust dispersion during mixing and grinding.