Vibration-Damping Rubber "Hanenite" [Case Study Introduction 3] (Chip Mounter Equipment)

"Hanenite" is a vibration-damping rubber that excels in shock absorption and vibration absorption, absorbing energy without much rebound even when subjected to external forces. Hanenite GP50V is compliant with UL94-V0 standards, making it safe to use in environments where flame resistance is required. It also has oil resistance, allowing for safe use around various machinery and oil applications. Its physical properties and durability are comparable to those of general rubber. It is widely adopted across various industries as cushioning and vibration-damping materials. [Characteristics] ● Rebound elasticity is 5% (measured value). ● Load capacity is approximately 2,200 kg (for dimensions 10×100×100 mm with a deflection of 10%). The values may vary depending on the contact area, so please contact us for details. ● Can be processed into various shapes. Molding similar to general rubber is possible. Cutting, machining, and punching of sheet materials are also acceptable. ● Strong adhesion with metals is possible. *For more details, please refer to the PDF document or feel free to contact us.

"Hanenite" is a vibration-damping rubber that excels in shock absorption and vibration absorption, absorbing energy with minimal rebound even when subjected to external forces. Hanenite GP40HB is compliant with UL94-HB and can be used in components where flame resistance is required. It also has oil resistance, making it safe for use in various machinery and oil-related applications. Its physical properties and durability are comparable to those of general rubber. It is widely adopted in various industries as cushioning and vibration-damping materials. 【Characteristics】 ● Rebound elasticity is 5% (measured value). ● Load capacity is approximately 1,700 kg (for a size of 10×100×100 mm with a deflection of 10%). The values may vary depending on the pressure area, so please contact us for details. ● Can be processed into various shapes. Molding similar to general rubber is possible. Cutting, machining, and punching of sheet materials are also acceptable. ● Strong adhesion to metals is possible. *For more details, please refer to the PDF materials or feel free to contact us.

"Hanenite" is a vibration-damping rubber that excels in shock absorption and vibration absorption, absorbing energy with minimal rebound even when subjected to external forces. Hanenite OP40 exhibits the best vibration-damping properties at room temperature. Additionally, it has superior weather resistance (ozone resistance) compared to other grades, making it suitable for outdoor use without any issues. Its physical properties and durability are comparable to those of general rubber. It is widely used as cushioning material and vibration-damping components in various industries. 【Characteristics】 ● The rebound elasticity is 9% (measured value). ● Load capacity is approximately 1,700 kg (for a size of 10×100×100 mm with a deflection of 10%). The values may vary depending on the contact area, so please contact us for details. ● It can be processed into various shapes. Molding similar to general rubber is possible. Cutting, machining, and punching of sheet materials are also acceptable. ● Strong adhesion with metals is possible. *For more details, please refer to the PDF document or feel free to contact us.

"Hanenight" is a damping rubber that excels in shock absorption and vibration damping, absorbing energy with minimal rebound even when subjected to external forces. Hanenight CP55S, in particular, demonstrates excellent cold resistance, maintaining superior damping properties even at -20°C. Additionally, due to its high hardness compared to CP40S, it has excellent load-bearing capacity. Its physical properties and durability are comparable to those of general rubber. It is widely adopted as a vibration-damping material across various industries. 【Characteristics】 ● Rebound elasticity is 10% (measured value). ● Load capacity is approximately 3,700 kg (for dimensions 10×100×100 mm with a deflection of 10%). The values may vary depending on the contact area, so please contact us for details. ● Can be processed into various shapes. Molding similar to general rubber is possible. Cutting, machining, and punching of sheet materials are also acceptable. *For more details, please refer to the PDF document or feel free to contact us.