Just softening the coating! Coating stripping and cleaning method (IMI method) for bridges.

Low odor and low irritation, considerate of both people and the environment. Efficient with a small amount of usage! *A summary of the construction method and examples of stripping will be provided as a gift.

The environment-adaptive coating film swelling softening stripping agent "Coating Film Stripping and Cleaning Method (IMI Method)" is compatible with oil-based phthalic acid, chlorinated rubber, epoxy, polyurethane, and fluorine-based coatings. However, it may not be sufficiently effective on inorganic zinc-rich primers, inorganic zinc-rich paints, and shop primers. 【Construction Method】 1. Spray 250g/m² of IMI specification coating film softening agent evenly (first application). 2. Apply paper* over the IMI specification coating film softening agent. * Any general commercial product (such as toilet paper or water-soluble tissue paper) is acceptable. 3. Leave it for 1 to 2 hours immediately after application, check the swelling state of the coating film, and then reapply 250g/m² evenly (second application). 4. Ensure adequate ventilation and leave it for 6 hours, 24 hours (the next day), 30 hours, and 48 hours until the coating film is in a state that can be stripped. Be aware of the time it takes for the coating film to soften in preparation for this work. 5. Remove with a scraper or similar tool. 6. If a thick film remains, repeat steps 1, 2, 3, 4, and 5. 7. Wipe the steel surface from which the coating film has been removed with water (using a damp cloth, etc.). 8. Confirm the drying of the steel and proceed with the painting work.

others