Installed ultraviolet radiation intensity sensor
It measures the irradiance (W/m²), defined as the ratio of the radiation flux (W) incident on a surface to the unit area (m²), in the UVA / UVB / UVC spectral range. With the adoption of a new photodiode, it is insensitive to ? and infrared light. The outdoor installation type is the MC8P-PHOT3S series. ■mV signal output It measures light and radiation in the spectral regions of VIS-NIR, UVA, UVB, and UVC as illuminance (lux) or irradiance (W/m²). It is also capable of measuring the number of photons per unit time and per unit area in the photosynthetically active radiation (PAR) wavelength range of 400 to 700 nm. The WPLP series does not require an external power supply.
Inquire About This Product
basic information
The output signal from the mV is obtained through the shunt resistor of the photodiode terminal. The photocurrent generated when the photodiode receives light is converted into a potential difference and read by a voltmeter. When the potential difference (PD) is read, the measurement is calculated using the calibration coefficient (output coefficient). Each probe is calibrated at the factory before shipment and has its own unique calibration coefficient (output coefficient). This coefficient is indicated on the individual probes and in the accompanying manual. Probes in the WPLP series are equipped with cosine correction diffusers. The diffuser for UV measurement probes is made of polished quartz, while other probes are made of acrylic or Teflon (WPLP-PHOTO-01). Probes in the WPLP series are designed for measurements that can continuously monitor the above light and radiation levels indoors or outdoors (excluding UV measurement models).
Price range
Delivery Time
※Please confirm each time.
Applications/Examples of results
■Probe Calibration <WPLP-UVA-01> Calibration is performed using the 365nm line of a Xe-Hg (Xenon-Mercury) lamp through a spectral interference filter. The measurements are conducted by comparing with a temporary standard appointed by the Delta Ohm Calibration Center. This probe can be used in all processes that require monitoring of UV lamp emissions, such as polymerization of resins and adhesives, and tanning lamps.
Company information
Introducing measuring instruments, packaging materials, and logistics equipment. We always deliver a new lineup of products! We provide information on special deals, such as manufacturer collaboration products, as well as limited-time and limited-quantity items.