Notice of advertisement publication in the September 5, 2022 issue of the Japan Machinery News "Manufacturer Top Interview & Grand Fair Special Feature."

A pump that uses compressed air to transfer liquids by utilizing internal pressure! It minimizes residual liquid, is energy-efficient, and is suitable for safely dispensing highly flammable liquids.

◎ Explosion-proof design that does not use electricity ◎ Double safety structure for peace of mind ◎ Can be stored in a sealed manner ◎ Compatible with high-viscosity liquids ◎ Low failure rate ◎ Efficient liquid discharge without waste ◎ Discharge method can also be selected 《Benefits》 ● Minimal residual liquid (approximately 200cc), can discharge without waste ● Safe transfer of volatile and flammable liquids ● Quiet operation with a 1 horsepower compressor ● Low air consumption and energy-saving ● Acceptable for small amounts of foreign matter contamination ● Continuous operation possible 《Features》 ● Dedicated to JIS standard 200L closed drums (large cap G2) ● Sealed pressurized drum for discharge only, not for recovery ● Double pressure reduction with regulator and safety valve for safety ● Equipped with an anti-static grounding wire (only for G, AS, SUS types) 《Air Pressure Pump Mechanism》 This pump inserts depressurized compressed air into the drum, changing the internal pressure of the drum to discharge and draw in liquid. Since there are no obstacles in the flow path, it can handle liquids with foreign matter contamination and viscosity (up to 3,000 cP) without failure. Additionally, being air-operated, it can be used with liquids and environments that pose a risk of ignition or explosion. *Flow meter and gun nozzle included; foreign matter contamination is not allowed.

• pump

A pump that uses internal pressure with compressed air for transferring liquids, equipped with a solvent nozzle! Minimizes residual liquid, energy-efficient, and suitable for safely dispensing highly flammable liquids.

◎ Explosion-proof design that does not use electricity ◎ Double safety structure for peace of mind ◎ Can be stored in a sealed manner ◎ Compatible with high-viscosity liquids ◎ Low failure rate ◎ Efficient liquid discharge without waste ◎ Discharge method can also be selected 《Benefits》 ● Minimal residual liquid (approximately 200cc), capable of efficient discharge ● Safe transfer of volatile and flammable liquids ● Quiet operation driven by a 1 horsepower compressor ● Low air consumption and energy-efficient ● Acceptable for small amounts of foreign matter contamination ● Continuous operation possible 《Features》 ● Dedicated for JIS standard 200L closed drums (large cap G2) ● Sealed pressurized drum for discharge only, not for recovery ● Double pressure reduction with regulator and safety valve for safety ● Equipped with an anti-static grounding wire (only for G, AS, SUS types) 《Mechanism of Air Pressure Pump》 This pump inserts reduced pressure compressed air into the drum, changing the internal pressure of the drum to discharge and draw in liquid. Since there are no obstacles in the flow path, it can handle liquids with foreign matter contamination and viscosity (up to 3,000 cP) without failure. Additionally, being air-operated, it can be used with liquids and environments that pose a risk of ignition or explosion. *Flow meters and gun nozzles are not compatible with foreign matter contamination.

• pump

A pump that uses compressed air to transfer liquids by utilizing internal pressure! It minimizes residual liquid, is energy-efficient, and is suitable for safely dispensing highly flammable liquids.

◎ Explosion-proof design that does not use electricity ◎ Double safety structure for peace of mind ◎ Can be stored in a sealed manner ◎ Compatible with high-viscosity liquids ◎ Low failure rate ◎ Efficient liquid discharge without waste ◎ Discharge method can also be selected 《Benefits》 ● Minimal residual liquid (approximately 200cc), can discharge without waste ● Safe transfer of volatile and flammable liquids ● Quiet operation driven by a 1 horsepower compressor ● Low air consumption and energy-saving ● Acceptable for small amounts of foreign matter contamination ● Continuous operation possible 《Features》 ● Dedicated to JIS standard 200L closed drums (large cap G2) ● Sealed pressurized drum for discharge only, not for recovery ● Double pressure reduction with regulator and safety valve for peace of mind ● Equipped with an anti-static grounding wire (only for G, AS, SUS types) 《Mechanism of Air Pressure Pump》 This pump inserts reduced-pressure compressed air into the drum, changing the internal pressure of the drum to discharge and draw in liquid. Since there are no obstacles in the flow path, it can handle liquids with foreign matter contamination and viscosity (up to 3,000 cP) without failure. Additionally, since it is air-operated, it can be used with liquids and environments that pose a risk of ignition or explosion. *Flow meter and gun nozzle included; foreign matter contamination not allowed.

• pump

Pump for transferring kerosene, light oil, and gasoline using compressed air to utilize internal pressure! Minimizes residual liquid, energy-saving, and safely allows for small portions of highly flammable liquids.

◎ Explosion-proof design that does not use electricity ◎ Double safety structure for peace of mind ◎ Can be stored in a sealed manner ◎ Compatible with high-viscosity liquids ◎ Low failure rate ◎ Efficient liquid discharge without waste ◎ Discharge method can also be selected ≪Advantages≫ ● Minimal residual liquid (approximately 200cc), can discharge without waste ● Safe transfer of volatile and flammable liquids ● Quiet operation driven by a 1 horsepower compressor ● Low air consumption and energy-saving ● Acceptable for small amounts of foreign matter contamination ● Continuous operation possible ≪Features≫ ● Dedicated to JIS standard 200L closed drums (large cap G2) ● Sealed pressurized drum for discharge only, not for recovery ● Double pressure reduction with regulator and safety valve for safety ● Equipped with an anti-static grounding wire (only for G, AS, SUS types) ≪Mechanism of the Air Pressure Pump≫ This pump inserts depressurized compressed air into the drum, changing the internal pressure of the drum to discharge and draw in liquid. Since there are no obstacles in the flow path, it can handle liquids with foreign matter contamination and viscosity (up to 3,000 cP) without failure. Additionally, because it is air-operated, it can be used with liquids and environments that pose a risk of ignition or explosion. *Flow meter and gun nozzle included; foreign matter contamination is not acceptable.

• pump

A pump that uses compressed air to transfer liquids such as kerosene, light oil, and gasoline! It minimizes residual liquid, is energy-efficient, and safely dispenses highly flammable liquids in small quantities.

◎ Explosion-proof design that does not use electricity ◎ Double safety structure for peace of mind ◎ Can be stored in a sealed manner ◎ Compatible with high-viscosity liquids ◎ Low failure rate ◎ Efficient liquid discharge without waste ◎ Discharge method can also be selected ≪Advantages≫ ● Minimal residual liquid (approximately 200cc), can discharge without waste ● Safe transfer of volatile and flammable liquids ● Quiet operation driven by a 1 horsepower compressor ● Low air consumption and energy-saving ● Acceptable with small amounts of foreign matter contamination ● Continuous operation possible ≪Features≫ ● Dedicated to JIS standard 200L closed drums (large cap G2) ● Sealed pressurized drum for discharge only, not for recovery ● Double pressure reduction with regulator and safety valve for safety ● Equipped with an anti-static grounding wire (only for G, AS, SUS types) ≪Mechanism of the Air Pressure Pump≫ This pump inserts depressurized compressed air into the drum, changing the internal pressure of the drum to discharge and draw in liquid. Since there are no obstacles in the flow path, it can handle liquids with foreign matter contamination and viscosity (up to 3,000 cP) without failure. Additionally, being air-operated, it can be used with liquids and environments that pose a risk of ignition or explosion. *Flow meter and gun nozzle included; foreign matter contamination is not acceptable.

• pump

Pump for transferring using internal pressure with compressed air, equipped with an oil gun nozzle! Minimizes residual liquid, energy-saving, and suitable for safely dispensing highly flammable liquids.

◎ Explosion-proof specification that does not use electricity ◎ Double safety structure for peace of mind ◎ Can be stored in a sealed manner ◎ Compatible with high-viscosity liquids ◎ Low failure rate ◎ Efficient liquid discharge without waste ◎ Discharge method can also be selected ≪Advantages≫ ● Minimal residual liquid (approximately 200cc), can discharge without waste ● Safe transfer of volatile and flammable liquids ● Quiet operation driven by a 1 horsepower compressor ● Low air consumption and energy-saving ● Acceptable for small amounts of foreign matter contamination ● Continuous operation possible ≪Features≫ ● Dedicated to JIS standard 200L closed drums (large cap G2) ● Sealed pressurized type for discharge only, not for recovery ● Double pressure reduction with a regulator and safety valve for peace of mind ● Equipped with an earth wire for static electricity measures (only for G, AS, SUS types) ≪Mechanism of the Air Pressure Pump≫ This pump inserts depressurized compressed air into the drum, changing the internal pressure of the drum to discharge and draw in liquid. Since there are no obstacles in the flow path, it can handle liquids with foreign matter contamination and viscosity (up to 3,000 cP) without failure. Additionally, since it is air-operated, it can be used with liquids and environments that pose a risk of ignition or explosion. * Flow meter and gun nozzle included; foreign matter contamination not allowed.

• pump

A pump that uses compressed air to utilize internal pressure for transfer! Minimizes residual liquid, energy-efficient, and suitable for safely dispensing highly flammable liquids.

◎ Explosion-proof design that does not use electricity ◎ Double safety structure for peace of mind ◎ Can be stored in a sealed manner ◎ Compatible with high-viscosity liquids ◎ Low failure rate ◎ Efficient liquid discharge without waste ◎ Discharge method can also be selected ≪Advantages≫ ● Minimal residual liquid (approximately 200cc), capable of waste-free discharge ● Safe transfer of volatile and flammable liquids ● Quiet operation driven by a 1 horsepower compressor ● Low air consumption and energy-saving ● Acceptable for small amounts of foreign matter contamination ● Continuous operation possible ≪Features≫ ● Dedicated to JIS standard 200L closed drums (large cap G2) ● Designed for discharge only with sealed pressurized drum, not for recovery ● Double pressure reduction with regulator and safety valve for added safety ● Equipped with an anti-static grounding wire (only for G, AS, SUS types) ≪Air Pressure Pump Mechanism≫ This pump introduces reduced pressure compressed air into the drum, changing the internal pressure of the drum to discharge and draw in liquid. Since there are no obstacles in the flow path, it can handle liquids with foreign matter contamination and viscosity (up to 3,000 cP) without failure. Additionally, being air-operated, it can be used with liquids and environments that pose a risk of ignition or explosion. *Flow meter and gun nozzle versions do not allow for foreign matter contamination.

• pump

A pump that uses compressed air to utilize internal pressure for transfer. It is optimal for safely dividing highly flammable liquids with minimal residual liquid and energy efficiency.

"APD Series - Discharge Only" APD-25 (for oil) APD-25N (for oil / with gun nozzle) APD-25G (for kerosene, light oil, gasoline) APD-25GN (for kerosene, light oil, gasoline / with gun nozzle) APD-25AS (for solvents) APD-25ASN (for solvents / with gun nozzle) APD-25GATN (for kerosene, light oil / with auto-stop gun) ◎ Explosion-proof specification that does not use electricity ◎ Double safety structure for peace of mind ◎ Can be stored in a sealed manner ◎ Compatible with high-viscosity liquids ◎ Low failure rate "Benefits" ● Minimal residual liquid (approximately 200cc), can discharge without waste ● Safe transfer of volatile and flammable liquids ● Quiet operation with a 1 horsepower compressor ● Low air consumption and energy-saving ● Acceptable for small amounts of foreign matter contamination ● Continuous operation possible "Features" ● Dedicated for JIS standard 200L closed drums (large cap G2) ● Pressure-fed discharge only, recovery not possible ● Double pressure reduction with regulator and safety valve for safety ● Equipped with an anti-static grounding wire (only for G, AS, SUS types)

• pump

A pump that uses compressed air to utilize internal pressure for transfer. It is optimal for safely dispensing highly flammable liquids with minimal residual liquid and energy efficiency.

"APD Series Discharge Only" APD-20 (for oil) APD-20N (for oil / with gun nozzle) APD-20G (for kerosene, light oil, gasoline) APD-20GN (for kerosene, light oil, gasoline / with gun nozzle) APD-20AS (for solvents) APD-20ASN (for solvents / with gun nozzle) APD-20SUS (for solvents) APD-20SUSN (for solvents / with gun nozzle) APD-20GATN (for kerosene, light oil / with auto-stop gun) ◎ Explosion-proof specification that does not use electricity ◎ Double safety structure for peace of mind ◎ Can be stored in a sealed manner ◎ Compatible with high-viscosity liquids ◎ Low failure rate "Benefits" ● Minimal residual liquid (about 200cc), can discharge without waste ● Safe transfer of volatile and flammable liquids ● Quiet operation with a 1 horsepower compressor ● Low air consumption and energy-saving ● Acceptable for small amounts of foreign matter contamination ● Continuous operation possible "Features" ● Exclusively for JIS standard 200L closed drums (large cap G2) ● Sealed pressurized drum type for discharge only, recovery not possible ● Double pressure reduction with regulator and safety valve for peace of mind ● Equipped with an anti-static grounding wire (only for G, AS, and SUS types)

• pump

A new filter ideal for chip recovery has arrived! A must-see for customers using NC lathes and machining centers!

Cleaning time for our conventional stainless steel filters When dirt is severe, it takes about 30 minutes or more, now reduced to just a few minutes! *The time is an approximate guideline and may vary depending on the cleaning method, environment, and usage conditions. ◎ Filter cleaning has become easier ◎ It now includes a dewatering function ◎ Compatible with both stainless steel and non-woven fabric types *Not included with the main unit and sold separately. 【Compatible Products】 ■ Air-operated circulating filtration cleaner 'J-F Series' 　＜J-FS＞ For chips, SUS filter type 　＜J-FF＞ For polishing, non-woven fabric filter type ■ Air-operated tank cleaning filtration cleaner 'APDQO Series' 　＜APDQO-FS＞ For chips, SUS filter type 　＜APDQO-FF＞ For polishing, non-woven fabric filter type

• pump

Cutting fluids for machine tools can be reused! Tank cleaning time is drastically reduced!

**APDQO Series** APDQO-FF100 (Non-woven Fabric Filter) APDQO-FS100 (Stainless Steel Filter) APDQO-FB100 (Bag Filter) ◎ Does not use electricity ◎ Automatically stops when full ◎ Equipped with a safety valve as standard **Benefits** ● Enables reuse of cutting fluid ● Improves tool life ● Safe due to air drive with no electric leakage ● Cleaning time as short as 5 minutes **Features** ● Designed specifically for JIS standard 200L open drums ● Capable of separating cutting fluid and chips ● Safety valve and float included as standard **Applications** The air-operated tank cleaning filtration cleaner APDQO-F series is capable of cleaning tanks of machine tools, as well as filtering and separating 'liquids' and 'solids'. Therefore, in addition to filtering chips and sludge from machine tools, it can be used in the following ways: ● Cleaning machine tool tanks (removing chips and sludge and reusing cutting fluid) ● Separating and sorting food waste in food processing plants (restaurants) ● Separating water and sludge from mountains and rivers ● Separating and sorting waste and sewage

• others

Reusing cutting fluids for machine tools and tank cleaning.

**APDQO Series** APDQO-FF (Non-woven Fabric Filter) APDQO-FS (Stainless Steel Filter) APDQO-FB (Bag Filter) ◎ No electricity used ◎ Automatic stop when full ◎ Equipped with a safety valve as standard **Benefits** ● Reuse of cutting fluid is possible ● Improved tool life ● Safe due to air drive with no electric leakage ● Cleaning time as short as 5 minutes **Features** ● Dedicated to JIS standard 200L open drum cans ● Capable of separating cutting fluid and chips ● Safety valve and float included as standard **Applications** The air-operated tank cleaning filtration cleaner APDQO-F series is capable of not only cleaning tanks of machine tools but also filtering and separating 'liquids' and 'solids'. Therefore, it can be used for purposes other than filtering chips and sludge from machine tools, such as: ● Cleaning of machine tool tanks (removal of chips and sludge and reuse of cutting fluid) ● Separation and sorting of food waste in wastewater at food processing plants (restaurants) ● Separation of water and sludge from mountains and rivers ● Separation and sorting of waste and sewage

• others

It is possible to circulate and filter cutting fluid without stopping the machine tools.

**J-F Series** J-FF (Non-woven Fabric Filter) J-FS (Stainless Steel Filter) J-FB (Bag Filter) ◎ Does not use electricity ◎ Can be cleaned without stopping the machine ◎ Mesh can be changed as an option **Benefits** ● Cleaning can be done without stopping the machine ● Reuse of cutting fluid is possible ● Improved tool life ● Safe due to air drive with no electric leakage ● Cleaning time as short as 5 minutes ● Compact design allows work in tight spaces **Features** ● Diaphragm circulation type ● Continuous operation possible ● Filters available to match cutting fluid *Please be sure to use an air filter lubricator.* **Applications** ● Cleaning of machine tool tanks (removal of chips and sludge, reuse of cutting fluid) ● Separation and sorting of food waste in food processing plants (restaurants) ● Separation of water and sludge from mountains and rivers ● Separation and sorting of waste and sewage

• pump

Introducing the "Tank Cleaning and Filtration Cleaner" for customers using NC lathes and MC lathes, designed to reduce work burden and achieve efficient cutting fluid management.

Are you facing any of these cleaning issues? - Cleaning tasks are cumbersome and labor-intensive, causing back pain. - Long hours of cleaning lead to unpleasant odors. - Machines have to be stopped during cleaning, reducing productivity. - Accumulation of chips leads to unstable processing accuracy and defective products. Accumulation of chips and sludge can shorten the lifespan of machine tools and increase manufacturing costs. That's where our "Filtration Cleaner" comes in as a solution! The key to the solution is the introduction of a "Filtration Machine"! We have prepared the following two types according to your needs. 1. Large Capacity Open Drum Type (APDQO-F Series) This model is compatible with 200L or 100L open drums. - Reuse of cutting fluid: Efficiently reuse by filtering chips. - Improved cleaning efficiency: Significantly reduce work time. - Versatile application: Can also filter liquids other than those from machine tools. - Thorough management: Completely drain liquids to keep the tank clean. 2. Compact Circulation Type (J-F Series) This model is suitable for work in narrow spaces. - Maintain production efficiency: Work can be done without stopping the machine. - Space-saving design: Easy to install even in tight areas. - Continuous maintenance: Regular filtration keeps cutting fluid clean at all times.

• pump

Reduce downtime by cleaning the cutting fluid tank! Easy collection and disposal. Continuous operation is OK. J-F series and APDQO series.

We manufacture and sell the "Air-Powered Tank Cleaning Filtration Cleaner" to reduce the burden of daily cleaning of cutting fluid tanks. This product is recommended for those who face issues such as "machines stop during cleaning, leading to inefficiency," "difficulties in collecting and disposing of cutting fluid," "time and cost involved in tank cleaning," and "frequent breakdowns of electric vacuum cleaners." 【Product Lineup】 Circulation work without stopping the machine! Separates cutting fluid and chips! ■ Air-Powered Circulation Filtration Cleaner "J-F Series" - Separates cutting fluid and chips without stopping the machine - No risk of electric leakage during continuous operation - Easy disposal of chips - Filtration capacity of 60L/min < J-FS > Chip-specific SUS filter type Standard mesh < J-FF > Polishing-specific non-woven fabric filter type For aluminum, stainless steel, BC (CAC), resin, etc. Solving cleaning tasks in approximately 5 minutes! ■ Air-Powered Tank Cleaning Filtration Cleaner "APDQO Series" - High-speed cleaner - Can be washed thoroughly - Continuous operation is possible < APDQO-FS > Chip-specific SUS filter type < APDQO-FF > Polishing-specific non-woven fabric filter type

• pump

A vacuum cleaner for collecting oil and metal shavings in a bucket. It is convenient for site cleaning as it can be used for both dry and wet applications.

"APPQO Series" APPQO400S (For oil / Wet and dry use) APPQO400 (For oil / Wet and dry use) APPQO400G (For kerosene and light oil / Wet and dry use) APPQO400AS (For solvents / Wet and dry use) ◎ Simple structure with no breakdowns ◎ Easy operation ◎ Convenient options "Benefits" ● Can be used simply by placing it on a commercially available pail ● Continuous operation possible ● Usable as both a suction pump and a vacuum cleaner for wet and dry applications ● Less prone to breakage compared to electric vacuum cleaners ● Air-driven, safe for use in explosion-proof areas with no risk of ignition "Features" ● Dedicated for collection (general oil, oil, chips, etc.) ● Compatible with JIS standard 20L open pails (recommended outer diameter of 300mm±1, plate thickness of 0.4mm or more) ● Usable with air compressors of 3 horsepower (2.25kw) or more

• pump

A vacuum cleaner for collecting oil and metal shavings in a pail can. It is convenient for site cleaning as it is suitable for both dry and wet use.

《APPQO Series》 APPQO550S (For oil / Wet and dry use) APPQO550 (For oil / Wet and dry use) APPQO550-SET (For oil / Wet and dry use / Vacuum cleaner set) ◎ Simple structure with no breakdowns ◎ Easy operation ◎ Convenient options 《Benefits》 ● Can be used simply by placing it on a commercially available pail ● Continuous operation possible ● Usable as both a suction pump and a vacuum cleaner for wet and dry applications ● More durable compared to electric vacuum cleaners ● Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ● For collection only (general oil, oil, chips, etc.) ● JIS standard 20L open pail (for top outer diameter 300mm±1, recommended plate thickness of 0.4mm or more) ● Usable with air compressors of 5 horsepower (3.75kw) or more ● Comes with air coupler 30PM

• pump

Minimum recovery particle size of 5.5μ for powder collection. Powder and dust recovery rate of over 98%.

《APPQO Series》 APPQO-CY25 (for dust) APPQO-CY32 (for dust) ◎ Simple structure with no failures ◎ Easy operation ◎ Convenient options 《Benefits》 ● Can be used simply by placing it on a commercially available pail ● Continuous operation possible ● Less prone to breakage compared to electric vacuum cleaners ● Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ● Dedicated for dust collection ● Compatible with JIS standard 20L open pails (for top outer diameter 300mm±1, recommended plate thickness of 0.4mm or more) ● Usable with air compressors of 5 horsepower (3.75kw) or more ● Standard equipped with grounding wire ● Uses anti-static hose ● Usable with cyclone-type drums of 50L, 100L, and 200L * Not to be used for materials that pose a risk of dust explosion (metal powders, aluminum powders, toner, etc.) * As it is an industrial vacuum cleaner, it cannot be used for powders that directly enter the human body (food powders, medicines, etc.)

• pump

[For oil / wet and dry use] Large capacity high-speed drum vacuum cleaner, maximum 200L

◎ Simple structure that is trouble-free ◎ Easy to operate ◎ Convenient options 《Benefits》 ● Can be used simply by placing it on a drum with a top plate ● Continuous operation possible ● Usable as both a wet and dry vacuum and an intake pump ● Less prone to breakage compared to electric vacuum cleaners ● Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ● Dedicated for collection (general oil, oil, cutting chips, etc.) ● Specifically for JIS standard 200L open drums ● Automatic stop when liquid is full ● Usable with air compressors of 10 horsepower (7.5 kW) or more ● Recommended air hose size is 3/8 or larger 《Applications》 Cleaning around equipment and vehicles in automotive repair shops Cleaning in pulp mills, paper mills, and printing factories Collection of cutting scraps in rubber manufacturing plants Recovery of cutting and cutting oil in metal processing Cleaning in shipyards and bilge areas Cleaning of warehouses and aisles Recovery of sludge and wastewater from septic tanks and pits Collection of welding spatter Recovery of grease traps and floating oil

• pump

Solvent / Wet and Dry Use: A vacuum cleaner that can collect solvents and metal shavings! Convenient for on-site cleaning due to its wet and dry capabilities.

◎ Simple structure, no worries about breakdowns ◎ Easy to operate ◎ Convenient options 《Benefits》 ● Can be used simply by placing it on a commercially available pail ● Continuous operation possible ● Usable as both a wet and dry vacuum and an intake pump ● Less likely to break compared to electric vacuum cleaners ● Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ● Designed for collection only (general oil, oil, metal shavings, etc.) ● Compatible with JIS standard 20L open pails (for top outer diameter of 300mm±1, recommended plate thickness of 0.4mm or more) ● Automatic stop when liquid is full ● Usable with air compressors of 3 horsepower (2.25kw) or more 《Applications》 Cleaning around equipment and vehicles in automotive repair shops Cleaning in pulp mills, paper mills, and printing factories Collection of cutting scraps in rubber manufacturing factories Recovery of cutting and cutting oils in metal processing Cleaning in shipyards and bilge areas Cleaning of warehouses and aisles Recovery of sludge and wastewater from septic tanks and pits Collection of welding spatter

• pump

[For kerosene and light oil / Wet and dry use] A vacuum cleaner that can collect kerosene and light oil! Convenient for site cleaning due to its wet and dry capabilities.

◎Simple structure, trouble-free ◎Easy operation ◎Convenient options 《Benefits》 ●Can be used simply by placing it on a commercially available drum ●Continuous operation possible ●Can be used as both a wet and dry vacuum pump ●Less likely to break compared to electric vacuum cleaners ●Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ●Dedicated for collection (general oil, oil, metal shavings, etc.) ●Compatible with JIS standard 20L open drums (for top outer diameter of 300mm±1, recommended plate thickness of 0.4mm or more) ●Automatic stop when liquid is full ●Can be used with air compressors of 3 horsepower (2.25kw) or more 《Applications》 Cleaning around equipment and vehicles in automotive repair shops Cleaning in pulp mills, paper mills, and printing factories Collection of cutting scraps in rubber manufacturing factories Recovery of cutting and cutting oils in metal processing Cleaning in shipyards and bilge areas Cleaning of warehouses and aisles Recovery of sludge and wastewater from septic tanks and pits Collection of welding spatter

• pump

Oil and wet/dry vacuum cleaner for collecting oil and metal shavings! Convenient for site cleaning due to its wet/dry capability.

◎ Simple structure, no breakdowns ◎ Easy to operate ◎ Convenient options 《Benefits》 ● Can be used simply by placing it on a commercially available pail ● Continuous operation possible ● Usable as both a wet and dry vacuum pump ● Less prone to breakage compared to electric vacuum cleaners ● Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ● For collection only (general oil, oil, cutting chips, etc.) ● Compatible with JIS standard 20L open pail (for top outer diameter 300mm±1, recommended plate thickness of 0.4mm or more) ● Automatic stop when liquid is full ● Usable with air compressors of 3 horsepower (2.25kw) or more 《Applications》 Cleaning around equipment and vehicles in automotive repair shops Cleaning in pulp mills, paper mills, and printing factories Collection of cutting scraps in rubber manufacturing factories Recovery of cutting and cutting oil in metal processing Cleaning in shipyards and bilge areas Cleaning of warehouses and aisles Recovery of sludge and wastewater from septic tanks and pits Collection of welding spatter

• pump

Oil and wet/dry vacuum cleaner that can collect oil and metal shavings! Convenient for site cleaning due to its wet/dry capability.

◎ Simple structure with no risk of failure ◎ Easy to operate ◎ Convenient options 《Advantages》 ● Can be used simply by placing it on a commercially available pail ● Continuous operation possible ● Usable as both a wet and dry vacuum and an intake pump ● More durable compared to electric vacuum cleaners ● Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ● Dedicated for collection (general oil, oil, metal shavings, etc.) ● Compatible with JIS standard 20L open pails (for top outer diameter of 300mm±1, recommended plate thickness of 0.4mm or more) ● Usable with air compressors of 3 horsepower (2.25kw) or more 《Applications》 Cleaning around equipment and vehicles in automotive maintenance shops Cleaning in pulp mills, paper mills, and printing factories Collection of cutting scraps in rubber manufacturing factories Recovery of cutting fluids in metal processing Cleaning in shipyards and bilge areas of ships Cleaning in warehouses and aisles Recovery of sludge and wastewater from septic tanks and pits Collection of welding spatter

• pump

Oil and wet/dry vacuum cleaner for collecting oil and metal shavings! Convenient for site cleaning due to its wet/dry capability.

◎ Simple structure, no breakdowns ◎ Easy to operate ◎ Convenient options 《Benefits》 ● Can be used simply by placing it on a commercially available pail ● Continuous operation possible ● Usable as both a wet and dry vacuum and an intake pump ● More durable compared to electric vacuum cleaners ● Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ● For collection only (general oil, oil, metal shavings, etc.) ● Compatible with JIS standard 20L open pails (recommended outer diameter of 300mm±1, plate thickness of 0.4mm or more) ● Automatic stop when liquid is full ● Usable with air compressors of 5 horsepower (3.75kw) or more ● Comes with air coupler 30PM 《Applications》 Cleaning around equipment and vehicles in automotive repair shops Cleaning in pulp mills, paper mills, and printing factories Collection of cutting scraps in rubber manufacturing factories Recovery of cutting fluids in metal processing Cleaning in shipyards and bilge areas Cleaning in warehouses and aisles Recovery of sludge and wastewater from septic tanks and pits Collection of welding spatter Recovery of grease traps and floating oil

• pump

Oil and wet/dry vacuum cleaner for collecting oil and metal shavings! Convenient for site cleaning due to its wet/dry capability.

◎ Simple structure, trouble-free ◎ Easy operation ◎ Convenient options 《Benefits》 ● Can be used simply by placing it on a commercially available pail ● Continuous operation possible ● Usable as both a wet and dry vacuum and an intake pump ● Less prone to breakage compared to electric vacuum cleaners ● Air-driven, safe for use in explosion-proof areas, no fire risk 《Features》 ● Dedicated for collection (general oil, oil, metal shavings, etc.) ● Compatible with JIS standard 20L open pail (for top outer diameter of 300mm±1, recommended plate thickness of 0.4mm or more) ● Automatic stop when liquid is full ● Usable with air compressors of 5 horsepower (3.75kw) or more ● Comes with air coupler 30PM 《Applications》 Cleaning around equipment and vehicles in automotive repair shops Cleaning in pulp mills, paper mills, and printing factories Collection of cutting scraps in rubber manufacturing plants Recovery of cutting and cutting oils in metal processing Cleaning in shipyards and bilge areas of ships Cleaning in warehouses and aisles Recovery of sludge and wastewater from septic tanks and pits Collection of welding spatter Recovery of grease traps and floating oil

• pump

Oil and wet/dry vacuum cleaner for collecting oil and metal shavings! Convenient for site cleaning due to its wet/dry capability.

◎Simple structure, no breakdowns ◎Easy to operate ◎Convenient options 《Benefits》 ●Can be used simply by placing it on a commercially available drum ●Continuous operation possible ●Can be used as both a wet and dry vacuum pump ●Less prone to breakdown compared to electric vacuum cleaners ●Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ●Designed for collection only (general oil, oil, metal shavings, etc.) ●Compatible with JIS standard 20L open drums (recommended outer diameter of 300mm±1, plate thickness of 0.4mm or more) ●Can be used with air compressors of 5 horsepower (3.75kw) or more ●Includes air coupler 30PM 《Applications》 Cleaning around equipment and vehicles in automotive repair shops Cleaning in pulp mills, paper mills, and printing factories Collection of cutting scraps in rubber manufacturing factories Recovery of cutting fluids in metal processing Cleaning in shipyards and bilge areas Cleaning of warehouses and aisles Recovery of sludge and wastewater from septic tanks and pits Collection of welding spatter Recovery of grease traps and floating oil

• pump

Oil use / wet and dry use! Vacuum cleaner with silencer! A pail vacuum cleaner that can collect oil and metal shavings! Convenient for site cleaning due to its wet and dry capabilities.

◎ Simple structure, no worries about breakdowns ◎ Equipped with new features for greater convenience and easy operation ◎ Convenient options 《Benefits》 ● Can be used simply by placing it on a commercially available drum ● Continuous operation possible ● Usable as both a wet and dry vacuum and an intake pump ● Less prone to breakage compared to electric vacuum cleaners ● Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ● Dedicated for collection (general oil, oil, metal shavings, etc.) ● Compatible with JIS standard 20L open drums (recommended outer diameter of 300mm±1, plate thickness of 0.4mm or more) ● Automatic stop when liquid is full ● Usable with air compressors of 5 horsepower (3.75kw) or more ● Comes with air coupler 30PM 《Applications》 Cleaning around equipment and vehicles in automotive maintenance shops Cleaning in pulp mills, paper mills, and printing factories Collection of cutting scraps in rubber manufacturing factories Recovery of cutting fluids and shavings in metal processing Cleaning in shipyards and bilge areas Cleaning of warehouses and aisles Recovery of sludge and wastewater from septic tanks and pits Collection of welding spatter Recovery of grease traps and floating oil

• pump

A vacuum cleaner for collecting oil and metal shavings in a pail. Now more convenient with a foot switch.

"APPQO Series" APPQO550AF (For Oil / Wet and Dry Use / Foot Switch Included) ◎ Simple structure with no failures ◎ Easy operation ◎ Convenient options "Benefits" ● Can be used simply by placing it on a commercially available pail ● Continuous operation possible ● Usable as both a suction pump and a vacuum cleaner for wet and dry applications ● Less prone to breakage compared to electric vacuum cleaners ● Air-driven, safe for use in explosion-proof areas, no risk of ignition ● Operable while standing ● Easy ON/OFF with just a foot press ● No unnecessary movements, no waste of air consumption ● Both hands are free, increasing work efficiency "Features" ● For collection only (general oil, oil, metal shavings, etc.) ● JIS standard 20L open pail (for top outer diameter 300mm±1, recommended plate thickness of 0.4mm or more) ● Usable with air compressors of 5 horsepower (3.75kw) or more ● Comes with air coupler 30PM

• pump

Oil and wet/dry vacuum cleaner for collecting oil and metal shavings! Convenient for site cleaning due to its wet/dry capability.

◎ Simple structure that is trouble-free ◎ Equipped with new features for greater convenience and easy operation ◎ Convenient options 《Benefits》 ● Can be used simply by placing it on a commercially available pail ● Continuous operation possible ● Usable as both a wet and dry vacuum, functioning as an inhalation pump as well ● Less prone to breakage compared to electric vacuum cleaners ● Air-driven, making it safe for use in explosion-proof areas without fire risk 《Features》 ● Designed for collection only (general oil, oil, cutting chips, etc.) ● Compatible with JIS standard 20L open pails (recommended outer diameter of 300mm±1, plate thickness of 0.4mm or more) ● Automatic stop when liquid is full ● Usable with air compressors of 5 horsepower (3.75kw) or more ● Comes with air coupler 30PM 《Applications》 Cleaning around equipment and vehicles in automotive repair shops Cleaning in pulp mills, paper mills, and printing factories Collection of cutting scraps in rubber manufacturing factories Recovery of cutting fluids in metal processing Cleaning in shipyards and bilge areas of ships Cleaning in warehouses and aisles Recovery of sludge and wastewater from septic tanks and pits Collection of welding spatter Recovery of grease traps and floating oil

• pump

Oil and wet/dry vacuum cleaner for collecting oil and metal shavings! Convenient for site cleaning due to its wet/dry capability.

◎ Simple structure, no breakdowns ◎ Equipped with new features for greater convenience and easy operation ◎ Convenient options 《Benefits》 ● Can be used simply by placing it on a commercially available drum ● Continuous operation possible ● Usable as both a wet and dry vacuum pump ● Less prone to breakage compared to electric vacuum cleaners ● Air-driven, safe for use in explosion-proof areas, no fire risk 《Features》 ● Dedicated for collection (general oil, oil, metal shavings, etc.) ● Compatible with JIS standard 20L open drums (recommended outer diameter of 300mm±1, plate thickness of 0.4mm or more) ● Usable with air compressors of 5 horsepower (3.75kw) or more ● Comes with air coupler 30PM 《Applications》 Cleaning around equipment and vehicles in automotive repair shops Cleaning in pulp, paper, and printing factories Collection of cuttings in rubber manufacturing factories Recovery of cutting fluids in metal processing Cleaning in shipyards and bilge areas Cleaning of warehouses and aisles Recovery of sludge and wastewater from septic tanks and pits Collection of welding spatter Recovery of grease traps and floating oil

• pump

For dust collection: Minimum recovery particle size 5.5μ! Powder and dust recovery rate over 98%.

◎Simple structure, no worries about breakdowns ◎Easy to operate ◎Convenient options 《Benefits》 ●Can be used simply by placing it on a commercially available pail ●Continuous operation possible ●Less prone to breakage compared to electric vacuum cleaners ●Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ●Dedicated for dust collection ●Compatible with JIS standard 20L open pails (recommended outer diameter of 300mm±1, plate thickness of 0.4mm or more) ●Can be used with air compressors of 5 horsepower (3.75kw) or more ●Standard equipped with grounding wire ●Uses anti-static hose ●Can also be used with cyclone-type drums of 50L, 100L, and 200L *Not to be used with materials that pose a risk of dust explosion (metal powders, aluminum powders, toner, etc.) *As this is an industrial vacuum cleaner, it cannot be used with powders that directly enter the human body (food powders, medicines, etc.)

• pump

[For kerosene and light oil / Liquid only] Collect low-viscosity liquids into open pails.

◎Simple structure, no breakdowns ◎Easy operation ◎Convenient options 《Benefits》 ●Can be used simply by placing it on a commercially available pail ●Can suction one pail in about 15 seconds ●Continuous operation possible ●Less prone to breaking compared to electric models ●Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ●For liquids only (general oils, etc.) ●Compatible with JIS standard 20L open pails (recommended outer diameter of 300mm±1, plate thickness of 0.4mm or more) ●Automatic stop when liquid is full ●Can be used with air compressors of 1 horsepower (0.75kw) or more

• pump

【For oil / liquid only】Collect low-viscosity liquid into an open drum.

◎Simple structure, no worries about breakdowns ◎Easy operation ◎Convenient options 《Advantages》 ●Can be used simply by placing it on a commercially available pail ●Can suction one pail in about 15 seconds ●Continuous operation possible ●Less prone to breaking compared to electric models ●Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ●For liquids only (general oils, etc.) ●Compatible with JIS standard 20L open pails (recommended outer diameter of 300mm±1 and plate thickness of 0.4mm or more) ●Automatic stop when liquid is full ●Can be used with air compressors of 1 horsepower (0.75kw) or more

• pump

【For solvents / Liquid only】Collect low-viscosity liquid into open pails.

◎Simple structure, no worries about breakdowns ◎Easy to operate ◎Convenient options 《Advantages》 ●Can be used simply by placing it on a commercially available pail ●Can suck up one pail in about 15 seconds ●Continuous operation possible ●Less prone to breaking compared to electric models ●Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ●For liquids only (general oils, etc.) ●Compatible with JIS standard 20L open pails (recommended outer diameter of 300mm±1, plate thickness of 0.4mm or more) ●Automatic stop when liquid is full ●Can be used with air compressors of 1 horsepower (0.75kw) or more

• pump

【For kerosene and light oil / liquid only】 Waste liquid collection from 5 meters below the underground pit.

◎Compatible with high-viscosity liquids due to vacuum pressure type ◎Simple structure with no risk of failure ◎Easy operation ◎Convenient options 《Advantages》 ●Can be used simply by placing it on a stainless steel can ●Continuous operation possible ●Less prone to breakage compared to electric types ●Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ●For liquids only (general oils, etc.) ●Recommended for stainless steel cans (APPQO-SK) ●Automatic stop when liquid is full ●Can be used with air compressors of 5 horsepower (3.75kw) or more

• pump

For oil/liquid use: Waste liquid recovery from 5 meters below ground pit.

◎Compatible with high-viscosity liquids due to vacuum pressure type ◎Simple structure with no failures ◎Easy operation ◎Convenient options 《Advantages》 ●Can be used simply by placing it on a stainless steel can ●Continuous operation possible ●Less prone to breakage compared to electric types ●Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ●Liquid-specific (general oils, etc.) ●Recommended for stainless steel cans (APPQO-SK) ●Automatic stop when liquid is full ●Can be used with air compressors of 5 horsepower (3.75 kW) or more

• pump

Thank you very much for always using Majesta Fragrance. Our company will be open as usual during the Obon period. Please feel free to contact us for inquiries about scent arrangements or the introduction of commercial aroma diffusers.

High Strength, Low Cost: The Economic Advantages of Carbon Steel Frames Carbon steel is inherently strong, and this high structural strength ensures stable wind resistance while allowing for a simple support structure, reducing the need for extra components. This also lowers the wear rate during transportation, enabling further savings in material costs and installation expenses. Transportation and Construction: Streamlining the Entire Project The advantages of carbon steel frames are also evident in the transportation and construction phases. Standardized designs simplify on-site installation and shorten construction periods. For example, carbon steel frames can be packaged using a combination of wooden sticks and iron ties, improving unloading efficiency and increasing transport volume. This reduces construction time and labor costs, distributing the overall burden of the project across all stages. Technological Innovation: Breakthroughs in Corrosion Resistance With the evolution of material technology, the corrosion treatment of carbon steel frames has also significantly advanced. Grace Solar has adapted to the technological trends in process development, and all current carbon steel frames utilize AlMgZn coating. At the same time, to meet the special requirements of each project, our company offers custom options for hot-dip galvanizing.

#Intersolar South America - We invite you to attend the most influential solar energy event in Latin America. You will be able to see innovative solar mounting solutions designed for the Latin American market. At booth R2.82, Grace Solar will showcase how it is evolving regional solar projects: - Ground-mounted solar mounting systems suitable for Brazil's tropical storms and humid environments - Flexible roof installation systems that can accommodate diverse architectural needs Let's build the future of solar power together! Venue: Expo Center Norte, São Paulo, Brazil, Booth R2.82 Date: August 26-28, 2025

We have introduced the commercial aroma diffuser "Majesta Fragrance" to a cabaret club in Tokyo. The selected scent is "Royale," which offers a sense of calm and elegance. It spreads naturally throughout the floor, creating a high-quality space that satisfies the five senses. Majesta Fragrance is available for a free trial installation exclusively in the Kanto area. If you are interested in enhancing your store's scent experience, please feel free to contact us.

We have released a catalog for a trial version of a conceptual skills course designed to efficiently develop logical thinking and problem-solving skills in a short period. The course is structured in three levels, from basic to practical and applied, supporting skill enhancement directly related to work through video viewing, exercises, and detailed feedback. There is also a free trial version available, lasting about 10 to 20 minutes, allowing you to easily check the course content and approach. It is ideal for promotion and advancement exam preparation, as well as for developing the next generation of leaders, with a proven track record in many companies. For detailed materials or to apply for the trial version, please use the link below. Feel free to take advantage of it!