▼▲▼▲▼▼▲▼▲▼★Maika News★ Sliding properties (friction material) [NAO material] is widely used as a substitute for asbestos★ Repco News★▼▲▼▲▼▼▲▼▲▼

General grade with high purity and high aspect ratio. Phlogopite, derived from the Greek word "phlogopos," meaning "like a flame."

The "Repkomica S Series" is a product made from naturally occurring mica that has been refined and crushed at a domestic factory. It maximizes the high elasticity inherent in mica through manufacturing techniques developed over many years, resulting in a high aspect ratio (average particle size/thickness), which is a key feature of flake fillers. When incorporated into industrial materials such as plastics, paints, and rubber, it is expected to impart various functionalities centered around rigidity, dimensional stability, and heat resistance. 【Features】 ■ Long-term supply stability due to abundant reserves ■ Quality stability through domestic production system ■ No crystalline silica detected (detection level: below quantification limit) ■ Various grades available based on average particle size ■ Flexible response to custom grade orders and surface treatments ■ Short delivery times supported by domestic bases Please feel free to download for more detailed information. 　　　　　　　　　↓↓↓↓↓↓↓

• Coating film waterproofing material/permeable waterproofing material
• Anti-rot, anti-termite, anti-mold material
• Exterior coating materials

Demonstrates high cost performance! Easily applicable to products that require high whiteness and colorability.

The "Repkomica M Series" is a product made from naturally occurring muscovite that has been refined and crushed at a domestic factory. It has a high whiteness and can be easily incorporated into products that require coloring. Additionally, it excels in insulation resistance, making it particularly high-performing in applications such as electronic components. When filled into industrial materials like plastics, paints, and rubber, it is expected to improve and impart properties such as rigidity, dimensional stability, and heat resistance. 【Features】 ■ High whiteness and easy incorporation into products requiring coloring ■ Excellent insulation resistance ■ Particularly high performance in applications such as electronic components ■ Expected to improve and impart properties such as rigidity, dimensional stability, and heat resistance ■ Flexible response to surface treatment and custom grade production ■ Short delivery times supported by domestic facilities

• Coating film waterproofing material/permeable waterproofing material
• Anti-rot, anti-termite, anti-mold material
• Exterior coating materials

◆ Developing a stable supply system centered around our domestic factories ◆ High cost-performance due to processing raw materials with dry grinding! ◆ Custom-made products are also available

"Mica" is a mineral classified as a silicate aluminum compound. The mica products we handle are high-purity, high-quality, high-aspect-ratio flaky powders, and we have established a stable supply system centered around our domestic factories. We offer a wide range of grades with average particle sizes from a few micrometers to several hundred micrometers, allowing for flexible responses tailored to our customers' applications and requests. Additionally, since we mainly process raw materials for dry grinding, we achieve high cost performance. 【Features】 ■ A mineral classified as a silicate aluminum compound ■ Harmless to the human body and eco-friendly ■ High-purity, high-quality, high-aspect-ratio flaky powders ■ A stable supply system centered around our domestic factories ■ Flexible responses tailored to customers' applications and requests Please feel free to download for more detailed information. 　　　　　　　　　↓↓↓↓↓↓↓

• Solid wood flooring/outdoor
• cement
• Paving Materials

Mica is used as NAO material for brake pads! Since 1990, mica has been used as a filler to replace asbestos.

Slipperiness (sliding property) Enhances the sliding characteristics of molded products and smoothens the surface. Mica is mainly used as the NAO (Non-Asbestos Organic) material for brake pads. Since the discontinuation of asbestos in 1990, mica has been the filler that has been switched to. With mica's unique moderate friction effect, it can prevent squeaking, reduce slipping, and eliminate abnormal noises. Repco mica is also used primarily in friction materials, as well as in rubber, mold release agents, and adhesives. For more detailed information, feel free to download. 　　　　　　　　　↓↓↓↓↓↓↓

• Anti-rot, anti-termite, anti-mold material
• Coating film waterproofing material/permeable waterproofing material
• Exterior coating materials

Caught up in daily input, approval, and checks, I want to improve but can't find the time to consider it. In back offices, which tend to fall into such a "negative loop," it's understood that system implementation can be a breakthrough, but the burden of the implementation itself is often significant, leading to new sources of concern. During the consideration phase, it takes time to request materials and compare demos, and even if the differences are clear, there is no certainty about whether it will fit the company. After implementation, issues often arise in operations, such as not being able to connect to support or having multiple inquiry points that cause confusion. Therefore, while organizing common failure cases, we have summarized key points for practical staff to proceed with a selection that is "smooth," "thorough," and "without regret." Common failure case 1: The purpose is vague, and "systematization" becomes the goal. Common failure case 2: It does not match the company's operations. Common failure case 3: Realizing it is "difficult" after starting to use it. Common failure case 4: Total costs balloon. You can read more without needing to input personal information. Please visit the iBusiness Partners column page! https://ibp-column.sfsite.me/33868

We have published an introduction document for the solution "Easy Commuting Expenses," which supports the efficiency of commuting expense management. This document clearly presents the features and benefits of "Easy Commuting Expenses," which enables centralized management of commuting costs, including train, bus, and private car commuting. It streamlines tasks that place a heavy burden on staff, such as determining commuting routes, calculating refunds for commuter passes, responding to fare changes, and managing payment histories, while supporting fair and appropriate commuting expense reimbursements. Additionally, it includes case studies based on the implementation results from over 650 companies nationwide, as well as the effects of cost reduction and operational efficiency. Companies considering a review of commuting expense management or business improvements are encouraged to take a look.

Hotron, which manufactures and sells sensors, provides bed exit sensors for hospitals, nursing, and care facilities. Hotron offers easy-to-understand video guidance on how to use bed exit sensors wirelessly and how to set up device connections! ▼ Video Manual (YouTube) https://www.youtube.com/playlist?list=PLNVA4mTrZDqtJa6MfFRZQxwtfCSnAfxVy 【Bed Exit Sensors】 ○ Non-contact infrared sensor, simply place it - Pole-kun HB-H1 ○ Mat sensor, foldable thin mat - Mat-kun HB-UST ○ Body movement call - Ugo-kun HB-TV3 ○ Body movement call for wheelchairs - Ayumi-chan HB-WTV3 【Options】 ○ Nurse call linked wireless set - Wireless set (transmitter/receiver) HB-RS/HB-RJ ◎ For more information about the products, please contact us or download the catalog.

An article has been published regarding the case study of the attendance management system "KING OF TIME" implemented at Nichirei Industrial Co., Ltd. ~ In the case of Nichirei Industrial ~ The workload related to attendance management has decreased. With the transition from analog tasks to automated aggregation of working hours and granting of annual leave, we can now focus on our work with peace of mind. Particularly regarding the "punching method," we utilize fingerprint and facial recognition. By using biometric authentication, impersonation is not possible, and I believe the accuracy of attendance has significantly improved. Transparency has been ensured. 【Case Overview】 ■Challenges Before Implementation - Handwritten attendance sheets were used, resulting in input tasks to incorporate data into the payroll system. ■Key Points of Implementation - Systematization has reduced input tasks. Biometric authentication prevents impersonation. *For more details, please refer to the related links or feel free to contact us.

The non-contact beam touch sensor "HA-T401/HA-T520" has a compact detection range, making it an ideal automatic door sensor for installation on automatic doors facing narrow corridors or busy streets. Depending on the application and installation location, you can choose between "non-vision mounting type" and "non-vision built-in type." 【Features】 ● With the beam touch sensor, you can open and close the automatic door simply by bringing your hand close without touching it, ensuring hygiene. ● Depending on the installation environment, such as single sliding or bi-parting doors, the detection range can be set in four configurations: left, center, right, and a total of 12 spots. ● Two types of activation row settings are available to reduce unnecessary opening and closing of the automatic door due to cross traffic, contributing to energy-saving effects. ● The touch switch and infrared sensor are integrated, allowing for a switch between beam touch and infrared sensor with a single model. 【Recommended for such locations!】 ☑ Entrance facing a busy corridor ☑ Counter or sign near the door ☑ Buildings facing narrow corridors ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors ◎ For more details, please download the materials or contact us.