It was published in the September special issue of the monthly magazine "Piping Technology"!

Achieving high maintenance performance with a unit-based design! A diaphragm valve with zero seat leakage due to high airtightness, excellent corrosion and chemical resistance.

This catalog features a variety of diaphragm valves manufactured and sold by Japan Diaphragm Valve Co., Ltd. A diaphragm valve is a type of valve that has a structure that opens and closes the flow path using a flexible diaphragm made of materials such as rubber. They can be broadly classified into two types: the wear-resistant type with high airtightness and the straight type with low pressure loss and minimal liquid accumulation. The catalog includes a diverse range of products, including manual operation valves, air-operated ON-OFF valves, and electric operation valves. Additionally, technical materials such as dimension and material selection tables are included at the end. [Contents] ■ Manual operation valves ■ Air-operated ON-OFF valves ■ Air-operated flow control valves ■ Electric operation valves ■ Technical materials, etc. *For more details, please refer to the PDF materials or feel free to contact us. (The English and Chinese versions of the catalog can be downloaded from the catalog page of the special website below.)

• others

Introduction of lining products that prevent deterioration from corrosion and chemicals!

Introducing the "Lined Diaphragm Valve" with excellent resistance to corrosion and chemicals. It is utilized in a wide range of fields including chemicals, environmental and water treatment, pharmaceuticals, and semiconductors. It can be applied to countermeasure against corrosive fluids, gap corrosion, and metal ion elution. 【Product Lineup (Examples)】 "Type 430 Body": Hard natural rubber lining on a base material of FC200 or FCD-S "Type 459 Body": PFA lining on a base material of FCD-S or SCS13 "Type 460 Body": ETFE lining on a base material of FCD-S "Type 450 Body": Polyethylene lining on a base material of FC200 "Type 480 Body": Porcelain lining on a base material of FCD-S *Sanitary specification diaphragm valves are also available. *For more details, please refer to the catalog or feel free to contact us.

• others

Introduction of porcelain lining products with excellent resistance to corrosion and chemicals.

The "480(04) type" is a diaphragm valve made of porcelain lining that excels in corrosion and chemical resistance. It does not experience the permeation of chemical liquids, which can be a concern under certain conditions with fluororesin lining or rubber lining. Additionally, it is suitable not only as a corrosion-resistant valve for strong acidic fluids but also for highly permeable fluids such as hydrochloric acid and phosphorus trichloride. 【Features】 ■ Does not experience the permeation of chemical liquids, which can be a concern under certain conditions with fluororesin lining or rubber lining. ■ Suitable not only as a corrosion-resistant valve for strong acidic fluids but also for highly permeable fluids such as hydrochloric acid and phosphorus trichloride. ■ Base material: FCD-S, Lining: Porcelain *For more details, please refer to the PDF materials or feel free to contact us. (We have English and Chinese versions of the catalog available upon request!)

• others

Many delivery achievements for pharmaceutical and food plants, as well as high-purity chemical solutions! It can completely block corrosive fluids.

At Nippon Diavalve, we handle "corrosion-resistant valves with clamp connections" made of a body lined with fluororesin (ETFE). These valves are suitable for addressing corrosive fluids in sanitary piping, preventing crevice corrosion caused by chloride ions, and mitigating the leaching of metal ions. With the diaphragm valve's characteristics of "air-tightness" and "corrosion resistance," they can completely shut off corrosive fluids. We have a wealth of experience in pharmaceutical and food plants, as well as in high-purity chemical lines. 【Features】 ■ Body Material: SUS316L ■ Lining Material: ETFE ■ Connection Method: Clamp Joint (ISO2852) ■ Applicable Nominal Diameter: 25A to 65A (1S to 2.5S) *For more details, please refer to the PDF materials or feel free to contact us. (Catalogs in English and Chinese can be downloaded from the catalog page of the special website below.)

• others

■ FaceMe Security "Visitor Access Management" Key Features and Characteristics < Set Access Periods for Each Visitor > - Individual settings for the dates and times visitors can enter - Optimal access periods can be set according to the visitor's situation, whether for short visits or long stays. < Two Types of Authentication Methods to Accommodate Various Scenarios > ▶ Authentication via IP Camera - Enables authentication from a distance, achieving facial recognition without the need to disembark. ▶ Authentication via Facial Recognition Device (e.g., tablet) - Ideal for entry scenarios such as reception or security posts. Can be flexibly utilized depending on the installation location and operation. - Allows for on-the-spot registration of facial information using the device, enabling smooth responses to sudden visits or unexpected guests. < Real-Time Notifications Supporting Security and Reception Operations > - Real-time notifications of visitor and employee classifications, authorization expiration, and authentication status. - Prevents delays and oversights in verification, balancing the reduction of security staff workload with enhanced security. These features resolve issues arising from visual checks, logbooks, and IC card operations, simultaneously achieving enhanced security and improved efficiency in reception and security operations.

Do you have any concerns or requests regarding wired bed exit sensors? × Tangling or tripping over wired cables × Cable disconnection or damage × Worrying about forgetting to turn the switch back on after temporarily stopping the sensor. × Wanting to be notified of bed exits even from a location far from the nurse call outlet. Such concerns can be resolved simply by connecting our wireless nurse call linked set to the sensor! Our wireless nurse call linked set allows you to connect bed exit sensors like "Ugo-kun," "Foldable Thin Matta-kun," "Ayumi-chan," and "Just Place Pole-kun" to transmitters and receivers, reducing wiring around the bed area, alleviating concerns about tripping or falling due to cables, and contributing to a tidier work environment. Furthermore, it enables the use of bed exit sensors even from locations far from the nurse call outlet, allowing for more flexible equipment placement.

A system for driver terminals has been realized through API integration, promoting the optimization of the delivery process and improvement of services to customers. Seino Information Service Co., Ltd. and Briskola Co., Ltd. announce that they have adopted Briskola's full lifecycle API management product "BAMs Series" for the construction of a system utilizing APIs and the management of API connections with various business applications for driver terminals, aimed at improving delivery efficiency and achieving digitalization of logistics for Seino Transportation Co., Ltd. and transportation groups nationwide. By implementing Briskola's "BAMs Series" for API management in the delivery management system constructed through API integration, we will focus on responding to the expected increase in the number of API calls due to the anticipated increase in terminal numbers, as well as ensuring stable system operation and preventive detection. This will lead to improved operational efficiency for drivers and the provision of high-quality services to customers sending and receiving packages.

In this case study, we have received cooperation from Obayashi Corporation and Sankyu Inc., leaders at the forefront of the construction and logistics industries, to introduce their specific initiatives regarding "early detection of heatstroke risk" and "ensuring worker safety." Additionally, we have published an interview article with Obayashi Corporation, who contributed to the development of "GenVital LTE," as a "development story." As heatstroke risk has become a social issue, we encourage everyone in companies working on improving on-site productivity and safety measures for workers to read this for insights. GRIFFY will continue to contribute to creating safer and more comfortable working environments through DX solutions, including "GenVital LTE." ◾️ Obayashi Corporation (case study) ◾️ Sankyu Inc. (case study) ◾️ Obayashi Corporation (development story) *Please check the link for more details on the article.

We conducted an RTK accuracy verification of the GNSS reference station (Hi-Target Vnet6plus receiver + choke ring antenna) installed at our company building. Generally, with a single-frequency GNSS, once the baseline length exceeds 10 km, it becomes impossible to consider the path through the ionosphere as the same, and the difference in ionospheric delay becomes a significant source of error. By using dual-frequency GNSS, it is possible to correct the delay based on the differences in delay caused by the frequency of the radio waves; however, it is still said to be effective only up to about 10 km. Why is that? We have published the verification results on our blog.