Heavy rain in Henan Province, China.

Easily installable compared to general sandbags and water-absorbent sandbags. A simple type of water stop board to prevent flooding under the floor.

In recent years, flooding damage due to guerrilla rainstorms and typhoons has been increasing nationwide. In particular, flooding under floors accounts for about 60% of flood damage cases. Traditional sandbags take time to prepare, and it is difficult for women and the elderly to prepare, transport, and install them. On the other hand, 'Flood Guard F' is extremely lightweight and easy to transport and install. Made of ABS resin, it has strong durability, can be resized according to the location of use, can be compactly stored when not in use, and is compatible with the 3R principles. 【Performance Comparison (Partial)】 <Speed> ■Flood Guard F: Can demonstrate its capability just by placing it, excellent for initial response ■Typical sandbags: Require the labor of filling with soil ■Water-absorbing sandbags: Require the task of soaking up water *For more details, please refer to the PDF materials or feel free to contact us.

• Water stop

Flood damage, guerrilla rainstorm measures, disaster prevention supplies

"Flood Guard F" is a simple water barrier designed to prevent flooding caused by typhoons and sudden heavy rain. Made of lightweight, high-strength ABS, it can be set up quickly and is effective in emergencies. When not in use, it can be stacked for space-saving storage. 【Features】 ■ Two types: Maximum water stop height of 50cm for the "F50 series" and 80cm for the "F80 series" ■ Curved types "FN50/80・FW50/80" can be installed on curves ■ "FT50/80" can be adjusted to the best size from end to end of the installation area ■ "Double water stop" prevents leaks from the early stages of flooding ■ "Fitting bar" fills the gap between the wall and the water barrier ■ "Catch clip" reduces leaks and makes it easy to connect multiple units *For more details, please download the PDF or feel free to contact us. *Recruitment for agents has ended.

• Water stop

Flood prevention measures against typhoons and guerrilla heavy rain. Easy installation without tools. You can use a combination of four different shapes.

The new simple water stop board "Flood Guard F" is a product designed to prevent flooding damage from recent trends such as typhoons and sudden heavy rains. By installing sponge and water stop rubber, it significantly reduces water leakage. ■FZ50 Weight (kg): 4.4 Maximum waterproof height (cm): 51 Maximum durable water pressure (kg): 300 *For more details, please download the PDF or feel free to contact us.

• Water stop

Disaster prevention! Flood prevention! "Flood Guard F" is a water barrier that can be easily installed!

Are you prepared for potential water disasters? It is difficult to predict where water damage, such as river flooding or heavy rain, will occur. Our new type of simple water stop board, "Flood Guard F," is easy to carry, resistant to being swept away by strong currents, and durable enough to withstand impacts from debris. Additionally, it is an environmentally friendly material recycling product (3R product) that emphasizes Reduce (high durability), Reuse (reusability), and Recycle (recycling). *For more details, please download the PDF or feel free to contact us.

• Disaster prevention supplies

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily visible at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

The signing methods for electronic contracts (party type and witness type) are directly linked to the strength of their legal effectiveness. In this article, we will outline the reasons why the more stringent "party type" has been difficult to popularize until now. ---【Conclusion of this article】-------------------------------- • There are two signing methods for electronic contracts: "witness type" and "party type," which differ in the strictness of identity verification. • The main reasons why the party type has not spread are the three factors of "effort, cost, and the structural risk of entrusting a private key." • However, with the spread of public personal authentication (JPKI) using My Number cards, these three barriers are beginning to crumble. -------------------------------------------------------- The full text of the article can be accessed from the "Related Links."

Seven Corporation has started offering the "SeveNavi AI Cleaning Diagnosis Service," which supports the organization and improvement of cleaning challenges in manufacturing environments. Organizing cleaning challenges with AI and visualizing the next steps In manufacturing cleaning, various factors need to be considered, including the material of the object, type of dirt, adhesion state, currently used cleaning agents, working time, safety, and equipment conditions. On the other hand, there are also several challenges faced on-site, such as: - Unable to determine if the current cleaning method is appropriate - Wanting to reduce cleaning time and labor - Concerns about the safety of cleaning agents and their impact on materials - Wanting to compare with another cleaning method but unable to set test conditions - Not being able to utilize past cases and knowledge for improvement activities SeveNavi organizes information such as the object, dirt, current cleaning methods, and site photos using AI, clearly presenting the applicability of cleaning methods, points of caution, missing information, and how to proceed with comparative testing. If you have any challenges regarding reviewing current cleaning methods, comparing new cleaning methods, or reducing cleaning time and labor, please feel free to consult with us.

An online seminar will be held for design, purchasing, and DX promotion personnel considering the introduction or switch to new CAD systems, featuring the DWG-compatible 2D CAD "ARES." Participants can review content directly related to business improvement, including a comparison of features and performance with AutoCAD, automation using the CAD-specific AI "A3," automatic generation of DWG drawings from BIM data, and new ways of working in the cloud. ■ Date and Time: September 17, 2026 (Thursday) 13:30 - 15:00 ■ Format: Online (with archive viewing available) ■ Participation Fee: Free ■ Recommended for: - Those considering switching from AutoCAD - Those interested in AI utilization and automation in CAD operations - Those looking to streamline collaboration with BIM - Those seeking an environment where drawings can be edited regardless of location As a viewing benefit, a free "ARES Trinity Utilization Manual" (worth 6,000 yen) will be provided. Additionally, if you apply through the URL in the related links, our company, Keynos Logic, will consistently support you from post-seminar implementation considerations to estimates and support after operation begins. If you are interested in ARES, feel free to start by participating in this seminar.

On August 28, 2026 (Friday), I participated in the "AMD Embedded Computing Summit Tokyo 2026" and showcased a "Gesture Demo" as a partner of AMD. The demonstration introduced a configuration that combines gesture recognition using OpenCV, status reporting with LLM, and one-axis motor control using INtime 7.2 and RSI-ECAT, enabling collaboration between AI, image processing, and real-time control on a single PC. We presented a next-generation PC-based industrial control system that integrates AI, image processing, and real-time control on one PC. <Overview of Demo Participation> https://www.mnc.co.jp/INtime/AMDxINtime/AMDEcsTokyoResults.html <Actual Demo Video> https://youtu.be/JmZke75_y0s <AMD CPU + INtime RTOS Introduction Page> https://www.mnc.co.jp/INtime/AMDxINtime/amdxintime.html #PC #RealTimeOS #IndustrialPC #AI