We will be exhibiting at the Smart Grid EXPO Autumn 2022.

Multi-point measurement capable FBG sensor

This product consists of an interrogator that performs light emission and reception for sensing, and an FBG fiber that has been processed with Fiber Bragg Grating (FBG). ■ Interrogator A compact and lightweight interrogator equipped with the components necessary for the analysis of Fiber Bragg Grating (FBG). ■ FBG Sensor Chain The FBG sensor chain is an optical fiber cable processed with Fiber Bragg Grating (FBG), allowing for flexible customization. The cable length can be up to 500 meters, and measurement points can be freely set, with a minimum spacing of 1 mm. It can also be used in combination with your currently used interrogator.

• Other measuring instruments

For temperature monitoring of transformers, reliable temperature monitoring is possible without being affected by noise from EMI/RFI or high voltage environments.

OSENSA's fiber optic temperature sensor for transformers enables real-time temperature monitoring of transformers without being affected by noise in environments with EMI/RFI or high voltage. The basic configuration of this product consists of a temperature sensor probe, transmitter, and software. The PRB-230 probe is designed for temperature measurement in oil-filled transformers and accommodates immersion and removal processes for various types of transformer oil. The transmitter is available in a type that can connect multiple probes with a single unit, allowing for simultaneous measurement of temperatures at multiple points.

• Other analytical equipment

Acoustic sensors that can be used in harsh environments such as high temperature, high pressure, high humidity, high magnetic fields, and radiation environments.

The Myotis1300 from Phonoptics is a fiber optic acoustic sensor that can be used in environments with high temperatures, high pressure, high humidity, electromagnetic interference (EMI/RFI), strong magnetic fields, and radiation. ■ Usable in Harsh Environments It can be used in environments with high temperatures, high pressure, high humidity, electromagnetic interference (EMI/RFI), strong magnetic fields, and radiation. ■ The Sensor is Compact and Easy to Install By using a telephone communication network (single-mode fiber and graded-index multimode fiber types), the microphone can be connected to existing optical networks. ■ Product Configuration of Myotis 1300 - Acoustic Sensor - Converter - Power Cable

• Other measuring instruments

Acoustic sensors that can be used in harsh environments such as high temperature, high pressure, high humidity, high magnetic fields, and radiation environments.

The Myotis 1400ht from Phonoptics is a fiber optic acoustic sensor designed to withstand harsh environments such as high temperatures, high pressures, high humidity, electromagnetic interference (EMI/RFI), strong magnetic fields, and radiation. It is capable of capturing sound in locations where conventional microphones cannot operate. ■ Utilizes patented sensor technology and fiber optics With MM50 fiber, microphones can be used up to 10 km from the converter, and with SM fiber, even further distances are possible. ■ The sensor is compact and easy to install Output options include BNC output, 3.5mm audio jack, and USB. ■ Product configuration of Myotis 1400ht - Acoustic sensor - Converter - Power cable

• Other measuring instruments

A compact and low-cost converter suitable for embedding in optical fiber sensors.

μMyotis is a compact converter that can be used with sensors provided by Phonoptics, such as acoustic sensors, dynamic pressure sensors Alpheus, vibration sensors, and tachometers (revolutions per minute meters). μMyotis is equipped with a light source, photodiode, and microcontroller, making it ideal for integration into devices due to its smaller size compared to conventional products. ■ Compact size suitable for integration into devices ■ Built-in light source, photodiode, and microcontroller ■ Compatible with various sensors from Phonoptics, including acoustic sensors, dynamic pressure sensors, vibration sensors, and tachometers ■ Customizable PCB ■ Capable of connecting to IoT (Bluetooth, GPS, LORA/SIGFOX module, Ethernet, CAN, GSM, etc.) It can also be used in combination with Phonoptics' Breakout (sold separately). *For details about Breakout products, please contact us.

• Other measuring instruments

Cost-effective converter for optical fiber sensors.

Mini Myotis is a cost-effective converter that can be used with Phonopitcs' optical fiber sensors (acoustic (microphone), dynamic pressure, vibration, tachometer (rotational speed meter), etc.) that are operable in harsh environments such as high temperatures and high magnetic fields. - Built-in SLED light source, photodiode, and microcontroller - Compatible with various sensors from Phonoptics (acoustic sensors, dynamic pressure sensors, vibration sensors, tachometers, etc.) - Enhanced stability with heat sink housing - Supports various outputs including BNC output

• Other measuring instruments

Nitto Kohki will hold the "2025 Attack Fair in Meiko" for two days from July 23 (Wednesday) to July 24 (Thursday), 2025, at the "Kowa Seminar Plaza 2F Training Room No. 12 (inside Kowa Sports Land)." The Attack Fair is an exhibition where you can actually "see, touch, and operate" Nitto Kohki's products. Additionally, there will be wonderful souvenirs for attendees and many fun activities prepared. We look forward to welcoming everyone!

We will be exhibiting at the "62nd JAPAN DIY HOMECENTER SHOW 2026." This year, the largest exhibition in the industry will be held with the theme "Let's Go to the DIY Festival in Summer!" Please be sure to visit our booth (No. M31). ■ Introduction of Exhibited Product: Insulation Material "SS Premier" We are introducing "SS Premier" with the concept of moving away from the existing 20mm thick insulation materials. [The secret of 5mm. Maintaining performance while being overwhelmingly thin, light, and easy to install.] - Achieves insulation performance equivalent to RW50mm with a thickness of just 5mm, making it possible to install in limited spaces. - As a sheet material, it can accommodate both round and square ducts. - Lightweight and flexible, making transportation and handling easy, reducing the burden on the job site. Compared to conventional products, it offers advantages in installation space, transportability, and retail display. It has numerous implementation records across the country, including government projects such as the Shibuya Ward Office reconstruction project, as well as universities, hospitals, and large-scale new construction projects. At the venue, you can take a look at actual product samples. All of our staff are sincerely looking forward to your visit at booth No. M31.

Kou Alpha X Co., Ltd. will be exhibiting at the "Automatic Identification Comprehensive Exhibition" held at Tokyo Big Sight. At our booth, we will showcase a wide range of products, including metal-compatible RFID tags (PMT series), "keychain-type tags," and "rugged, environment-resistant tube tags." We look forward to your visit.

North Engineering, the Taiwanese agent of Tokkyo Kiki Co., Ltd., will exhibit at the international exhibition "SEMICON TAIWAN 2026" held in Taiwan. At "SEMICON Taiwan," we will showcase products for micro-vibration and magnetic field countermeasures for semiconductor manufacturing plants, as well as seismic isolation devices for transformers and vibration-damping devices for air conditioning outdoor units as earthquake countermeasures. Event Dates: September 2 (Wednesday) - September 4 (Friday), 2026 Venue: Taipei Nangang Exhibition Center (TaiNEX Hall 1 & 2, Taipei City, Taiwan) Booth Number: K2568 (TaiNEX 1, 1st Floor)

"I don't have anyone in the company to ask if this is the right way to segment." "I can't decide whether it's okay to delete the scenarios set up by my predecessor." I often hear such voices from those in charge of operating MA tools. In this seminar, Shannon, as an MA vendor, will publicly share how they operate MA within their own marketing department, using the actual management screen. Please note that this seminar will not be recorded or archived. It will be presented only to the 15 companies that attend in person. [Screens to be viewed on the day] (tentative) 1: Conditions for segmentation 2: Flow and branches of scenarios 3: Discarded settings [Recommended for those who] - Are almost solely responsible for operating MA tools - Have not been able to make changes to the settings inherited from their predecessor - Feel that they are not using MA as they had originally intended - Want to know how other companies are actually operating at the screen level - Are considering reviewing their current MA tools