Notice of Summer Vacation

We develop cranes for the construction of transmission towers that incorporate customer feedback, ensuring safety and ease of use, contributing to the stable supply of electricity nationwide.

- By adopting a 2m top mast, safe assembly work such as support installation can be achieved while the mast is in place. - Smooth operation is possible with hoisting, elevation, and rotation inverter control. - Compact wireless operation. - Ground-mounted control panel for easy maintenance. 【Jib Length】18.75m Working Radius: 1.65m to 18.0m Lifting Capacity: 16.61kN at 18.0m, 27.45kN at 13.5m 【Jib Length】20.915m Working Radius: 1.77m to 20.0m Lifting Capacity: 17.65kN at 20.0m, 27.45kN at 13.5m 【Ground Lift Height】Standard 117m, 147m, Maximum 165m 【Total Mast Length】Standard 100m, 130m, Maximum 150m 【Total Weight】32.0t (Crane body at 102m)

• Transport machinery

We develop cranes for the construction of transmission towers that incorporate customer feedback, ensuring safety and ease of use, contributing to the stable supply of electricity nationwide.

- By adopting a 2m top mast, safe assembly work such as support installation can be achieved while the mast is set up. - Smooth operation is possible with hoisting, elevation, and rotation inverter control. - Compact wireless operation. - Ground-mounted control panel for easy maintenance. 【Jib Length】12.9m Working Radius: 1.22m to 13.0m Lifting Capacity: 19.61kN at 10.58m, 15.39kN at 13.0m 【Jib Length】16m Working Radius: 1.38m to 16.0m Lifting Capacity: 19.61kN at 10.5m, 12.25kN at 16.0m 【Ground Lifting Height】Standard 95m, Maximum 125m 【Total Mast Length】Standard 80m, Maximum 110m 【Total Weight】21.7t (Crane body at 80m)

• Transport machinery

We develop cranes for the construction of transmission towers that incorporate customer feedback, ensuring safety and ease of use, contributing to the stable supply of electricity nationwide.

■Smooth operation of elevation, rotation, and winching using hydraulic power ■Can be set up on slopes of up to 15° by rearranging the outriggers

• Transport machinery

Utilizing air, we reduce the friction between the transported items and the floor to one-thousandth (0.003). A one-ton weight can be moved with a force of 3 kg. *Manual available.

The "Air Caster" is a transport system that uses air for the transportation and positioning of heavy objects. It can move the weight of the transported items in any direction with a thrust of 0.3%, and positioning and direction changes can be easily performed. It is easy to operate for anyone, and requires little maintenance. If you are having trouble with transportation methods, please feel free to consult us. *Koshihara is a company that has a technical partnership with Aerogo as a machinery manufacturer. 【Features of the Air Caster】 ■ Can move heavy objects with light force ■ Direction is not fixed ■ Minimal damage to the floor surface ■ Easy to use and operable by anyone ■ Requires little maintenance ■ Generates little noise and dust, making it suitable for use in clean rooms ■ Suitable for transporting heavy objects in various fields, including construction, civil engineering, and industrial equipment *For more details, please refer to the PDF materials or feel free to contact us.

• Material handling systems and equipment

We develop cranes for the construction of transmission towers that incorporate customer feedback, ensuring safety and ease of use, contributing to the stable supply of electricity nationwide.

■Significantly reduced jib length change time Thanks to the adoption of a moment limiter, sudden jib length changes on site are easy. ■Achieves the largest working radius in its class at 28m ■Can lift 2 tons at a working radius of 24m Furthermore, smooth operation with inverter control ■Easy operation with the adoption of a joystick-type wireless controller

• Transport machinery
• Crane and others

Easy to maneuver and lightweight! Air casters that can be handled like a cart!

The "Aero Palette" is designed to move loads of up to 40 tons. For unlimited operability, the Aero Palette is particularly popular in situations such as manufacturing and assembly of parts. The Aero Palette can work alongside forklifts, cranes, and conveyors at a low cost, or serve as an alternative means of transportation. Optional handles, throttle controls, and wheels for use when unloaded are available. It is much easier to maneuver compared to hand pallets and can be moved lightly. Only one air hose is needed, making hose handling easy. 【Features】 ■ Can be handled like a cart ■ Very easy to maneuver ■ Can be moved lightly ■ Size can be specified ■ Easy hose handling *For more details, please refer to the PDF document or feel free to contact us.

• Material handling systems and equipment

Capable of transporting heavy loads of up to approximately 200 tons! Able to accommodate various sizes of cargo!

The "Air Caster Load Module" provides a new means of transport for moving packages of various sizes, shapes, and weights. Also known as machine skates, air skates, or air dollies, this versatile heavy-duty transport product can be placed under loads of different shapes. It consists of four air caster load modules, one console box (air distributor), and four connecting air hoses. One load module can transport loads weighing up to approximately 50 tons. The load modules come in fixed mount and slide mount types, and various combinations of materials can be selected, including standard neoprene and highly durable urethane types. We will make suggestions considering your usage environment and the items to be transported, so please feel free to contact us. 【Features】 ■ Capable of transporting loads weighing up to approximately 200 tons (when using four modules) ■ Can be set according to the size of the load ■ Compatible with various sizes of transported items ■ Various types can be selected according to the usage environment *For more details, please refer to the PDF materials or feel free to contact us.

• Material handling systems and equipment

A new type of long-span construction elevator from Koshihara has arrived!

The new low-landing type "KRD-980LF" rotor deck is an elevator designed for long-span construction work. In narrow construction sites such as urban areas, it eliminates the landing stage and allows installation within the space of the elevator body (stage guard is required), achieving shared (dual-use) guide rails with the conventional KRD series. From this time, the inclination detection device has also been completely renewed to a gyro type, enhancing accuracy and safety. This product comes with a standard specification of a plated finish, reducing painting costs during maintenance. 【Features】 ■ Achieves shared guide rails with the KRD series ■ Realizes a landing height of 300mm ■ Low vibration and low noise ■ An elevator with a high demand for a load capacity of 980kg ■ Effective width of the carrier is 983mm, making board loading easy ■ The outer width of the carrier is 1080mm, allowing installation on 900mm scaffolding *For more details, please refer to the PDF materials or feel free to contact us.

• Elevator

An article has been published about the case of introducing the expense reimbursement system "Rakuraku Seisan" at TSP Corporation. ~ In the case of TSP ~ Before the introduction, there were challenges such as dealing with the "paper" sent from various locations and the reliance on specific individuals for the tasks. After the introduction, the input and checking of FB data, which used to take 2 to 3 hours, can now be completed in just 5 minutes. Additionally, the mindset of the accounting department, which was previously reliant on manual entry, has changed. [Case Overview] ■ Challenges before introduction - Dealing with "paper" sent from various locations, reliance on specific individuals ■ Key points of introduction - A robust support system for setup and operation - Easy to start from a small scale both financially and functionally *For more details, please refer to the related links or feel free to contact us.

The facility operating the nurse call system has made the bed exit sensor wireless, allowing it to notify in conjunction with the nurse call. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensor wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ The bed exit sensor notifies wirelessly in conjunction with the nurse call. ○ Up to 5 transmitters can be registered with one receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.

Full and empty management refers to the real-time display of parking availability and the management of efficient use of parking spaces. By utilizing Hotron's sensors, drivers can quickly discover available parking spaces, achieving efficient parking lot operations. ■ For large parking lots, the "floor management method" and "block management method," which focus on cost reduction, are recommended. Sensors are installed at regular intervals to count the number of vehicles passing through. This method offers the advantage of easy installation and low costs. 【Target Products】 - Vehicle Count Sensor CCS2 - Ultrasonic Sensor HM-UX2/UW2 ■ For smaller scale operations, the "space management method," which installs sensors in each parking space to display availability with high accuracy, is recommended. By ensuring accurate full and empty displays, it helps prevent unnecessary entry of new vehicles and enables safe parking lot operations. 【Target Products】 - Occupancy Detection Sensor HM-UX2/UW2 - Occupancy/Pass Detection Sensor HM-LC6 - Occupancy Detection Sensor HM-LC7/LC7-FLS - Occupancy/Pass Detection Sensor HM-S6 - Occupancy Detection Sensor HM-S8

The non-contact beam touch sensor "HA-T401/HA-T520" has a compact detection range, making it an ideal automatic door sensor for installation on automatic doors facing narrow corridors or busy streets. Depending on the application and installation location, you can choose between "non-vision mounting type" and "non-vision built-in type." 【Features】 ● With the beam touch sensor, you can open and close the automatic door simply by bringing your hand close without touching it, ensuring hygiene. ● Depending on the installation environment, such as single sliding or bi-parting doors, the detection range can be set in four configurations: left, center, right, and a total of 12 spots. ● Two types of activation row settings are available to reduce unnecessary opening and closing of the automatic door due to cross traffic, contributing to energy-saving effects. ● The touch switch and infrared sensor are integrated, allowing for a switch between beam touch and infrared sensor with a single model. 【Recommended for such locations!】 ☑ Entrance facing a busy corridor ☑ Counter or sign near the door ☑ Buildings facing narrow corridors ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors ◎ For more details, please download the materials or contact us.

Japan is one of the top 10 countries in the world with frequent earthquakes. The 2020 White Paper on Land, Infrastructure, Transport and Tourism has also reported an increase in the probability of major earthquakes occurring. Regarding the Nankai Trough earthquake, the probability of an earthquake with a magnitude of 8 to 9 occurring within the next 30 years is estimated to be 70 to 80%. At Hotron, we recommend the introduction of seismic devices for earthquake countermeasures in buildings and equipment. The seismic device 'HK-2' is a product that automatically performs various controls that have been pre-set when it detects strong shaking equivalent to a seismic intensity of 5 lower or higher. For example, it can automatically execute actions such as: "Open automatic doors and gates to secure evacuation routes and access for emergency vehicles" "Transmit signals to the control room and stop facility equipment" "Unlock the keys to locked lockers" "Automatically play voice guidance" For more details, please download the materials or contact us.