Notice of Technical Seminar on Measures for the Longevity of Road Bridges (Fukuoka)

Technical materials featuring construction achievements are being distributed. A reduction of approximately 79% in process time is possible compared to conventional methods!

The "R Anchor" is a post-installed anchor bolt that can be removed after use, such as for temporary materials. It uses acrylic resin instead of conventional epoxy resin as the adhesive for the anchor bolt. Acrylic resin has the following features: - Can be installed at low temperatures down to -10°C - Short curing time (Summer resin: approximately 70 minutes at 25°C, Winter resin: approximately 120 minutes at 5°C) - Can be applied to wet surfaces Additionally, during installation, it eliminates the need for the setup and removal of pipes and sealing materials, as well as resin measurement and mixing tasks, allowing for approximately 79% reduction in process time compared to conventional methods. ★ Technical materials containing construction achievements are available upon request ★ [Contents (excerpt)] - About acrylic resin - Performance verification tests - Construction achievements [Applicable examples] - Temporary equipment during bridge construction (preventing overturning and falling during girder installation, etc.) - Fixing brackets for jack-up during bearing replacement - General civil engineering work, construction work, factory equipment fixation, etc. *For more details, please refer to the catalog or feel free to contact us.

• Bridge Materials
• Bridge Construction
• Other earthworks, foundation works, and exterior floors

Can be installed even at low temperatures of -10℃! Post-installed anchor bolts using acrylic resin.

The "NR Anchor" is an anchor bolt that uses acrylic resin and is applicable to all post-installed anchor bolts used in concrete structures. It has high viscosity and a short curing time, allowing for a reduction in construction time. During injection, there is no need for the installation and removal of pipes or seal materials, nor for resin measurement and mixing work. 【Features】 - Can be installed at low temperatures (minimum usable temperature -10°C) - Little reduction in strength even with rough mixing ratios of the two components - Prevention of construction defects such as mixing errors (uses dedicated injection equipment for automatic mixing) - Short curing time For more details, please contact the manufacturer of the R Anchor, Sanpo Co., Ltd.! *For more information, please refer to the catalog or feel free to contact us.

• Protective fence
• Bridge Construction
• others

Environmentally friendly and structure-friendly! Concrete surface protection material using acrylic rubber.

The "Alonbur Coat Z-X and Z-Y Method" is a concrete surface protection material that uses acrylic rubber. Repair methods for concrete structures that utilize the features of "Alonbur Coat" include the Z-X method (prevention of deterioration + prevention of peeling) and the Z-Y method (prevention of deterioration). All standard materials used are water-based, resulting in minimal organic solvent odors or unpleasant smells, as well as reduced skin irritation commonly associated with organic materials, making it environmentally friendly for both the surrounding area and workers. The coating can be reapplied, which is effective for environmental measures and waste reduction during the next repainting. 【Features】 ■ Environmentally friendly due to the use of water-based materials ■ Repainting of the coating is possible ■ Allows moisture release from within the concrete ■ Good adhesion durability of the membrane layer to the concrete ■ Easy maintenance *For more details, please refer to the catalog or feel free to contact us.

• Other civil engineering works
• Concrete construction
• Renovation and repair methods

Fuji High Frequency Industry Co., Ltd. will hold an online seminar titled "Fuji High Frequency's Laser Cladding Equipment" on Wednesday, August 27, 2025. This seminar will explain the laser cladding equipment at Fuji High Frequency Industry. We will discuss the specific equipment unique to laser cladding. This seminar is aimed at those considering the implementation of such equipment. 【Recommended for】 ■ Those seeking information on laser cladding equipment ■ Those wanting information on the equipment owned by Fuji High Frequency

In the field of food and health food research and development, an increasing number of companies are facing the following challenges: - Difficulty in exploring new functional materials and differentiation themes, leading to a depletion of research topics. - While they are collecting information from conferences and papers, they struggle to translate this into research themes directly related to their products. - They remain limited to competing similar products and follow-up projects, failing to establish uniqueness. - Although there are seeds of ideas, they struggle to elevate them to scientific hypotheses and build the necessary foundations for internal approval. Behind this lies a "wall of execution" that cannot be overcome by traditional information gathering and research processes. In this webinar, we will introduce a new R&D approach to break through these challenges. It is a next-generation research and development scheme that combines AI-driven hypothesis generation, which has achieved results in drug discovery, with scientific hypothesis verification by a food human trial CRO. This will allow for the transformation of vague ideas into scientifically verifiable projects, simultaneously achieving the construction of persuasive foundations for upper management and differentiation development.

Fujikohsuhou Industrial Co., Ltd. will hold an online seminar titled "Tips for Setting Laser Hardening Conditions" on July 20, 2025 (Wednesday). In laser hardening, factors such as output and speed are related to the quality of hardening. We will explain how output and speed are connected to quality factors. This seminar is aimed at those who are looking to start utilizing laser hardening. 【Recommended for】 ■ Those who want to learn about methods for setting laser hardening conditions ■ Those who want to obtain technical information about laser hardening

Take the 'first step' in DX talent development in Fukuoka. We will hold a free seminar where you can learn reskilling strategies that can be applied in the field through case studies and experiences! 'I've become responsible for DX, but I don't know where to start.' This is a participatory seminar aimed at representatives from small and medium-sized enterprises in Fukuoka City, Fukuoka Prefecture, where you can learn the 'first steps' in DX talent development and implementation support. While introducing case studies of representative DX tools such as Power Automate and Power BI, you will experience hands-on sessions with Copilot, allowing you to grasp practical small-start methods that can be implemented on-site. The content also includes specific success stories from the Fukuoka region, along with tips for promoting understanding and advancement within your organization.

We will be exhibiting at INCHEM TOKYO 2025, which will be held at Tokyo Big Sight from September 17 (Wednesday) to September 19 (Friday). This time, we will host many events, including special project stages and mini-seminars. At our booth, we will introduce our solutions and technologies based on the theme of "Sustainable Plant Engineering" from three different concepts. Please be sure to stop by our booth, East Hall 6, K-17.