Notice of Technical Seminar on Measures for the Longevity of Road Bridges (Tokyo)

Technical materials featuring construction achievements are being distributed. A reduction of approximately 79% in process time is possible compared to conventional methods!

The "R Anchor" is a post-installed anchor bolt that can be removed after use, such as for temporary materials. It uses acrylic resin instead of conventional epoxy resin as the adhesive for the anchor bolt. Acrylic resin has the following features: - Can be installed at low temperatures down to -10°C - Short curing time (Summer resin: approximately 70 minutes at 25°C, Winter resin: approximately 120 minutes at 5°C) - Can be applied to wet surfaces Additionally, during installation, it eliminates the need for the setup and removal of pipes and sealing materials, as well as resin measurement and mixing tasks, allowing for approximately 79% reduction in process time compared to conventional methods. ★ Technical materials containing construction achievements are available upon request ★ [Contents (excerpt)] - About acrylic resin - Performance verification tests - Construction achievements [Applicable examples] - Temporary equipment during bridge construction (preventing overturning and falling during girder installation, etc.) - Fixing brackets for jack-up during bearing replacement - General civil engineering work, construction work, factory equipment fixation, etc. *For more details, please refer to the catalog or feel free to contact us.

• Bridge Materials
• Bridge Construction
• Other earthworks, foundation works, and exterior floors

Can be installed even at low temperatures of -10℃! Post-installed anchor bolts using acrylic resin.

The "NR Anchor" is an anchor bolt that uses acrylic resin and is applicable to all post-installed anchor bolts used in concrete structures. It has high viscosity and a short curing time, allowing for a reduction in construction time. During injection, there is no need for the installation and removal of pipes or seal materials, nor for resin measurement and mixing work. 【Features】 - Can be installed at low temperatures (minimum usable temperature -10°C) - Little reduction in strength even with rough mixing ratios of the two components - Prevention of construction defects such as mixing errors (uses dedicated injection equipment for automatic mixing) - Short curing time For more details, please contact the manufacturer of the R Anchor, Sanpo Co., Ltd.! *For more information, please refer to the catalog or feel free to contact us.

• Protective fence
• Bridge Construction
• others

Environmentally friendly and structure-friendly! Concrete surface protection material using acrylic rubber.

The "Alonbur Coat Z-X and Z-Y Method" is a concrete surface protection material that uses acrylic rubber. Repair methods for concrete structures that utilize the features of "Alonbur Coat" include the Z-X method (prevention of deterioration + prevention of peeling) and the Z-Y method (prevention of deterioration). All standard materials used are water-based, resulting in minimal organic solvent odors or unpleasant smells, as well as reduced skin irritation commonly associated with organic materials, making it environmentally friendly for both the surrounding area and workers. The coating can be reapplied, which is effective for environmental measures and waste reduction during the next repainting. 【Features】 ■ Environmentally friendly due to the use of water-based materials ■ Repainting of the coating is possible ■ Allows moisture release from within the concrete ■ Good adhesion durability of the membrane layer to the concrete ■ Easy maintenance *For more details, please refer to the catalog or feel free to contact us.

• Other civil engineering works
• Concrete construction
• Renovation and repair methods

We will exhibit at the ICT Expo 2026 in Yamaguchi. Date: January 22, 2026 (Thursday) 12:30-17:30 ~ January 23 (Friday) 9:00-13:00 Venue: KDDI Ishin Hall, 1-1 Reiwa 1-chome, Ogori, Yamaguchi City Our booth No. A5 After registration, it will be at the back left of the entrance.

Fujikou Shuhou Industry Co., Ltd. will hold a free online seminar titled "Frequently Asked Questions about Laser Hardening" on February 19, 2025 (Wednesday). We have had discussions about laser hardening with various customers, and we will pick out several frequently asked questions and provide brief explanations. This seminar will be a helpful reference for those who have questions about laser hardening. 【Recommended for】 ■ Those who want to know a bit more about the niche aspects of laser hardening ■ Those who want to learn about common questions regarding laser hardening

Hello! This is OK-DEPOT. Starting tomorrow, we will hold a comprehensive seminar on natural material building materials that you can immediately propose! We encourage you to participate. *Please note that we may refuse participation from competitors or those in the same industry. ★Recommended for: - Those who want to make natural materials a strength of their company - Those who want to improve their proposal skills and increase unit prices - Those who want to utilize this as part of new employee training <How to Attend> This seminar will be conducted online (via the Zoom web conferencing system). You can participate from anywhere using your usual computer, smartphone, or tablet. Even if you have never used it before, you can easily connect by clicking the URL in the invitation email. (It takes about 3 minutes) After applying, please join the seminar using the invitation email that will be sent to you the day before the event. *To deliver valuable information to your company, we require video to be ON. If we cannot confirm that your video is ON, you may be asked to leave. Thank you for your understanding. *For quality improvement, the seminar will be recorded.

Our company will be exhibiting at the 44th Refrigeration, Air Conditioning, and Heating Exhibition, 'HVAC&R JAPAN 2026', held at Tokyo Big Sight. The main theme of this exhibition is "The Future Answers in HVAC&R," showcasing cutting-edge technologies, systems, and advanced products and services all in one place. At our booth, we plan to display "CO2 sensors" and "controllers." We sincerely look forward to your visit.

Latest Technology in Slope Disaster Prevention Seminar Held! As research results that organize the challenges of rockfall countermeasures, we will introduce the automation of surveys using ICT, the elucidation of wire mesh behavior, and emergency response methods. Furthermore, we will explain advanced technologies for preventing rockfalls and avalanches, such as net-type prevention techniques and fiber belt slope reinforcement, in response to the increase in landslides and compound disasters due to typhoons and heavy rain. We look forward to your participation. ■ Speaker and Seminar Overview 1. "Recommendations for the Advancement of Rockfall Countermeasures" 15:00–16:00 (60 minutes) Speaker: Hidetoshi Matsushima, President and CEO, Be Safe Co., Ltd. {Break 10 minutes} 2. Introduction of Nippon Steel's slope and embankment countermeasure technologies, including rockfall and snow prevention 16:10–16:35 (25 minutes) Speaker: Kengo Hori, Senior Chief Engineer, Civil Engineering Development Technology Department, Nippon Steel Materials Co., Ltd. *We strive to ensure the seminar concludes smoothly; however, due to the potential extension of lecture times and the provision of CPD/CPDS, there may be instances where the lecture time exceeds a few minutes.