We will exhibit the electric lock and interlock control panel "ISI" series, as well as airtight automatic opening doors, at the 24th Interphex Week Tokyo.

A door that can be opened and closed "without touching" for infection control measures.

As long as there is a power supply, it can be easily retrofitted. Compatible with both swinging and sliding doors. With the automatic opening and closing devices and various sensors that we sell and install, it is possible to convert existing doors into ones that can be opened and closed without touching them. As long as there is a power supply, installation is simply a matter of attaching the device and sensors. Compatible with both swinging and sliding doors. We offer sensors that open when you wave your hand, as well as those that open when a person approaches the door. *For more details, please refer to the materials. Feel free to contact us as well.

• Automatic door opening and closing devices for entrances and exits (auto doors)

Utility aluminum doors that cater to a wide range of needs.

This is a flush door that meets a wide range of needs, from large doors for the entry and exit of machinery from inspection openings to air-tight doors for super clean rooms that require strict airtight performance for the entry and exit of people and goods. The DR30 is a slim and lightweight aluminum flush door suitable for inspection openings and doors for people, commonly referred to as "man doors," using latch-type locks. The DR34 is a slim and lightweight aluminum flush door that allows for the integration of electric locks using a dedicated outer frame, and it can also accommodate interlock and access control systems. Its frame has a small profile and dimensions, giving it a neat appearance. There are the "DR30," which uses latch-type locks, and the "DR34," which enables the integration of electric locks with a dedicated outer frame. The DR40 is a versatile aluminum flush door that accommodates a wide range of sizes, from large doors for the entry and exit of machinery from inspection openings to those requiring high airtightness for super clean rooms. It meets airtight performance grade A-4 with both four-sided and three-sided frames.

• Hardware Doors, Handles and Locks
• Aluminum alloy door

【Exhibition Information】 Exhibition Location: Osaka ATC Green Eco Plaza Date and Time: 10:00 AM to 4:30 PM (Closed on Mondays and during the New Year holidays) Address: 2-1-10 Nanko-Kita, Suminoe-ku, Osaka City, ATC Building ITM Wing, 11th Floor West Side New Business Creation Zone - We are exhibiting the factory deodorizer "Deofure (R)" and the antibacterial deodorizer "Marimo Ball (R)." - The product technology for "Marimo Ball (R)" has obtained a patent (Patent No. 7042498). - We are displaying deodorants and usage devices. - A deodorization experience corner is set up. - Staff at the exhibition will provide simple explanations about the products. - It is also possible for our employees to visit the exhibition space at a scheduled time. *For more details, please refer to the materials.

Sekisui Filler Co., Ltd. will be exhibiting at the "Automotive Technology Exhibition 2026 YOKOHAMA" held at PACIFICO YOKOHAMA from May 27. (Booth number 285, within the Sekisui Chemical booth) 【Exhibited Products】 Mobility G - Re-sealable gasket HM (EV Seal 500) - Interior materials (Thermonex/Swiftlock) - Battery protection materials (EV Protect 4006SFR, etc.) Electronics / Car Electronics - Adhesives for camera modules - Adhesives for displays - Conformal coating agents - Optical adhesives We sincerely look forward to your visit.

Palmholtz Co., Ltd. will be exhibiting at the "AXIA EXPO 2026" held at Aichi Sky Expo (Aichi Prefectural International Exhibition Center). Our company possesses unique new technologies that transform oil palm trunks (Oil Palm Trunk = OPT), which have been treated as unused resources due to their lack of strength and value as building materials, into wood-based products such as building materials and furniture. The oil palm, which produces a large amount of edible oil, leaves the trunks unused and discarded after the oil is extracted. It is estimated that the amount of discarded trunks is 20 million tons per year in both Malaysia and Indonesia. This project involves peeling and drying the unused oil palm trunks to create veneer, which is then layered and compressed under high temperature and pressure to manufacture and sell exterior materials. We showcased a bench as a reference exhibit at the Malaysia Pavilion during the 2025 Osaka Expo. We sincerely look forward to your visit.

Kawasaki Corporation (Headquarters: Tokyo) is pleased to announce that it will participate in the interim report meeting for the Tokyo Metropolitan Government's "Decarbonization Support Project in the Supply Chain for the Creation of a Green Products Market," which will be held on May 20, 2026. At this meeting, we will present the CO2 reduction effects of our environmentally friendly plastic formwork "Daiko Panel," which we have conceived, developed, manufactured, and sold, along with our initiatives towards greening, including related auxiliary materials. [Overview of the Presentation] Theme: Utilizing CFP to enhance CO2 reduction of "Daiko Panel" and promote greening throughout the entire supply chain. Main Content: Introducing initiatives aimed at CO2 reduction, referencing the background of our application for this project and the CFP calculation results for "Daiko Panel" and its auxiliary materials. [Presentation Date and Time] Interim report meeting: May 20, 2026 (Wednesday) from 15:00 to 17:00 Details of the interim report meeting and the Tokyo Metropolitan Government's project: Decarbonization support in the supply chain for the creation of a green products market https://www.cfp-sc.metro.tokyo.lg.jp/

TESSHA Corporation will be exhibiting at 'FOOMA JAPAN 2026' held at Tokyo Big Sight. This exhibition covers various fields of food manufacturing and is one of the largest comprehensive food manufacturing exhibitions in the world, where advanced technologies and knowledge come together. We plan to showcase our "Small Catalytic Deodorization Device SCU-1EH type." We look forward to your visit.