Notice of Participation in the 【TIC】IS MEKASYS 2022 Exhibition (Gunma)

Are you having trouble with the essential "water droplet removal and drying process" after cleaning? We will provide you with a booklet that includes case studies on solving post-cleaning issues across various industries!

Are you having trouble with the blow process using air? There is always a cleaning process for parts (such as components) and products (like PET bottles and retort pouches). Following that process, there is always a drying process. I have heard that this drying is an eternal theme. Shall we finally resolve this eternal theme? Sonic's blowers and air knives efficiently and economically solve problems with high air volume and high-speed air! ▼ A task that required 0.4 MPa of pressure can now be achieved with just 29 kPa! ▼ When comparing the air volume of a compressor and a Sonic blower, to achieve an air volume of 7 m³/min, a compressor requires 62.5 horsepower. In contrast, the Sonic blower can achieve this with only 4 horsepower. The difference compared to compressors and domestic blowers is significant! The "Air Knife Trivia" section includes numerous case studies for problem-solving. 【Examples of cases】 ■ Automotive industry case studies ■ Food and beverage industry case studies ■ Pharmaceutical industry case studies ■ Steel industry case studies, etc. *For more details, please request materials or view the PDF data from the download.

• Conveyor

Powerful air at over 25 m/s for water removal and drying! Additionally, time-saving and energy-efficient! Comprehensive catalog available.

The Sonic Corporation's "Blower & Air Knife" is a device that dramatically improves the efficiency of part drying, food processing drying, and blowing away water droplets. Processes that require a pressure of 400 kPa can be achieved with an ultra-high efficiency of just 29 kPa! While achieving a 75% reduction in energy compared to compressed air, the water removal efficiency exceeds 95%, resulting in significant energy savings. 【Features】 ■ Lightweight and compact design ■ Generates a large volume of air with a small horsepower ■ Clean and dry air. Promotes evaporation with warm air at approximately 40°C ■ Energy-saving effects that far exceed those of compressors * A comprehensive catalog is available for download. * Demo units are also available for loan! Please apply through the "Contact" section. Note: There is a limited number of demo units, so please apply early!

• Conveyor

Sonic's blowers and air knives use high-speed air of up to 25.4 m/sec for water removal and drying! Energy-saving blowers! Demo units available for loan!

Are there any issues with the water drainage and drying processes for beverages, food, and food processing, as well as the blowing off of water droplets from cans, bottles, and PET bottles? ------ Such issues can be efficiently and economically resolved by the Sonic Air Knife System's high air volume and high-speed air! Tasks that previously required pressure like that of a compressor can now be achieved with just 29 kPa! When comparing the air volume of a compressor and a Sonic Blower, obtaining an air volume of 7 m³/min requires 62.5 horsepower from a compressor, whereas the Sonic Blower achieves this with only 4 horsepower. The difference is significant when compared to compressors and domestic blowers! 【Features】 ● Energy-saving effect reduces consumption by 75% compared to compressor air ● Water drainage efficiency of over 95% ● Generates a large volume of air with low horsepower ● The air is clean and dry, promoting evaporation with warm air at approximately 40°C ● Energy-efficient (compared to compressors) ● Lightweight and compact design *Demo units are available for loan, so please feel free to contact us. Additionally, if you can provide samples for testing, we will conduct tests at our company.

• others

"Sonic" water drainage drying is Sonic! We are introducing success stories and photos. [Simplified version]

This is a collection of case studies on Sonic Corporation's blower air knife systems. As success stories, we introduce how the Sonic air knife system provided technical solutions to issues such as labeling problems, removal of residues in the steel industry [removal of residues on plates], drying of automotive cylinders, insufficient drying of propane gas cylinders, and removal of residual water after cleaning contact lens pallets. We also include photographs. For more details, please contact us or refer to our catalog. We also have demo units available. You can try them out at your factory! Alternatively, you can conduct simple tests at our company! Please consider this!

• others

A specialized blower for draining/drying that uses a small motor to rotate at high speed and generate a large airflow!

Powerful air at over 25 m/s for water removal and drying! Additionally, time-saving and energy-efficient! Sonic Corporation's 'Blower & Air Knife' is a device that dramatically improves the efficiency of part drying, food processing drying, and water droplet removal. Processes that require a pressure of 400 kPa can be achieved with an ultra-high efficiency of just 29 kPa! It achieves a 75% reduction in energy consumption compared to compressor air, while maintaining a water removal efficiency of over 95%, resulting in significant energy savings. ≪Sonic Corporation Spiral Blower≫ 【Features】 ■ Lightweight and compact design ■ Generates a large volume of air with a small horsepower ■ Clean and dry air. Promotes evaporation with warm air at approximately 40°C ■ Energy-saving effects that greatly exceed those of compressors △▽△Basic Information△▽△ 【Product Lineup】 ■ Spiral Blower Thanks to proprietary technology, it generates a large airflow with energy efficiency compared to compressors and conventional blowers. The generated large airflow can be supplied continuously without pulsation. The structure is also easy to maintain.

• Conveyor

Improved air knife of the conventional Tear Drop (tear-shaped) design! Enhanced blowing efficiency!!

■High-Speed XE Air Knife The Sonic Corporation's High-Speed XE Air Knife nozzle, further improved from the conventional Tear Drop shape, achieves excellent work efficiency. It efficiently laminarizes the air, resulting in minimal pressure loss and uniform blowing across the entire slot. A key feature is that there are no control plates inside the air knife, allowing for uniform blowing from end to end. Additionally, it effectively draws in the surrounding air to create a powerful blow. We offer a wide variety of options for the number, position, direction, and length of the nozzle's piping installation. We also provide the world's only rotary air knife.

• Conveyor

A product that suppresses water splashing generated during the inspection, printing, labeling, and water draining/drying of filled PET bottles, cans, bottles, and pouches before packaging.

The Sonic SMART Tunnel (Sonic Modular Air Tunnel) can be used in extensive water drainage drying systems. It is a turnkey product that dries PET bottles, cans, and bottles before inspection, printing, labeling, or packaging, with a processing capacity of 100 to 1500 CPM. Adaptability: The Sonic SMART Tunnel is a modular system. Due to its bolt-tight design, it can be easily expanded if changes in product size or additional air knife configurations are needed due to increased production line demands.

• others

Decarbonization is currently shifting its positioning from "cost management" to "enhancing competitiveness," and we are entering an era where mere regulatory compliance is no longer sufficient. With the strengthening of sustainability labeling regulations and the EU's Carbon Border Adjustment Mechanism (CBAM), the environmental value of products has transcended corporate responsibility and become a crucial element in market competition. On the other hand, many companies are facing challenges such as: - The complexity of CFP calculation and environmental labeling requirements makes it difficult to know how to proceed. - How to balance regulatory compliance with enhancing competitiveness (differentiation). - Difficulty in prioritizing ISCC certification and CBAM compliance. In this seminar, we will invite Wastebox Co., Ltd., which has extensive consulting experience in the environmental field, to introduce ideas and specific examples on how to connect responses to decarbonization and the circular economy to business growth from both "offensive" and "defensive" perspectives. ■ Part 1: "Understanding the Environmental Value of Products from Offensive and Defensive Perspectives: How to Leverage Decarbonization and the Circular Economy for Differentiation and Regulatory Compliance" ■ Part 2: "Why Are We Entering an Era of Product Environmental Value Now? (Tentative Title)" ■ Part 3: "Introduction of Services Supporting the Reliability of Product Environmental Value"

The requirements for quality management systems in the automotive industry are becoming increasingly sophisticated year by year, and a more nuanced understanding and appropriate response are required for obtaining and maintaining IATF 16949 certification. In particular, the application of Rules 6th Edition has led to changes in the audit process and certification requirements, making it essential to understand these accurately. In this webinar, we will clearly explain the latest trends in IATF 16949 certification and the key points of Rules 6th Edition from the perspective of auditors, directly relating to practical applications.

In the food industry, as the importance of ensuring quality and safety continues to rise, there is a growing demand for understanding international food safety standards and appropriately responding to the latest requirements. In FSSC 22000 Ver. 7, aspects such as "food safety culture," "risk-based thinking," "unannounced audits," and "supplier management" have been strengthened, making corporate responses crucial. In this webinar, Mr. Hiroshi Ideta, Regional Representative for Japan and Korea at the FSSC Foundation, will explain the latest trends in domestic and international food safety standards and the trends of certified companies. Bureau Veritas will introduce the key points of the FSSC 22000 Ver. 7 revision. If you are considering how to respond to the standard revision or want to understand the latest trends, please join us. ■ Part 1: "Domestic and International Trends Surrounding Food Safety Standards and Trends of FSSC 22000 Certified Organizations" 　　　　Mr. Hiroshi Ideta, Regional Representative for Japan and Korea, FSSC Foundation ■ Part 2: "Explanation of Key Points of FSSC 22000 Ver. 7 Revision" 　　　　Bureau Veritas Japan Co., Ltd., System Certification Business Division, Technical Department 　　　　ISO/FSSC22000 Auditor, Koichi Mukai

Although spot coolers have been introduced on-site, are you struggling with issues such as "only the person in front of the spot cooler can feel cool" and "it's actually hotter due to the heat exhaust"? In this seminar, we will provide detailed information on how to effectively utilize "cool air distribution ducts" to easily resolve these challenges associated with spot coolers without incurring significant costs. ＼Especially recommended for the following individuals／ - Those considering heat stroke prevention measures for factories, warehouses, or construction sites - Those who have introduced spot coolers but feel unsatisfied with their effectiveness - Those who want to improve their work environment easily without incurring high costs

We are pleased to announce the archive distribution of our hosted web seminar titled "Easily Create Beautiful Manuals for kintone with Image Copy-Paste and Markdown Using StockNaut." We will provide a clear explanation of the kintone plugin "StockNaut," which allows you to richly describe multiple images embedded in a multi-line text field. The "Markdown syntax" adopted by StockNaut enables the creation of text that is easy for both humans and generative AI to handle. By combining it with generative AI, you can experience the benefits of StockNaut at 120%! We welcome those who are struggling with document creation, including manuals, to join us. 【Recommended for the following people】 - Those who want to create procedures, manuals, or knowledge bases on kintone. - Those who find it cumbersome to adjust formatting every time they create a manual. - Those who have heard of StockNaut but have not yet tried it. - Those who want to structure knowledge and refine writing in anticipation of future AI utilization.