Free Catalog Available: Various Uses of Pressed Products

Just stick it on, and you can easily create a transport line! Since it's a magnetic sheet, you can set up long transport lines in a short time. It can be kept at a low cost.

The "Harukoro Sheet" uses a magnetic sheet, making it easy to create units and convenient for transportation. It can be easily attached and detached, and customization in size and pitch is also possible. 【Features】 ■ Easy unit creation due to the use of a magnetic sheet. ■ Can use products made from five different materials, suitable for heavy loads. ■ More affordable compared to other unit products. ■ Easy to attach and detach. ■ Customizable in size and pitch. *For more details, please request documentation or view the PDF data available for download.

• Lifting and transport system

Due to being mass-produced press products, they are inexpensive. This product, which had a high demand from customers, is included in our standard lineup.

IM-type specification unit products ● Table-type ignition bearing unit "IBT type" ● Manual lift unit "Quick Lifter QL type" ● No screws required "Magnet Sheet MS type" 【Features】 ■ Products equipped with a debris removal slit in the NWE lineup ■ Ball diameter = φ1/2 to 1-3/16" (12.7 to 30.16mm) ■ Steel and stainless steel types are the same size, making replacement easy. ■ Conveying lines can be created to match the workpiece, from lightweight to heavy items. ■ The IM-R type offers products for heavy loads at a low price by machining only the receiving plate. *For more details, please refer to the PDF document or feel free to contact us.

• Sanitary fixtures

The layout can be freely adjusted with puzzle combinations! It can be used without being connected! A unit type that can accommodate four types of Iguchi Bear.

"Piece ♥ Peace Pazzle" allows for flexible assembly of transport line dimensions and layouts due to its puzzle-shaped plates. You can attach four types of ball bearings to a single plate, and the roller type can transport uneven workpieces that are difficult to move with ball bearings, without being restricted by the shape of cardboard bottoms. Additionally, using optional guides and magnets can enhance installation efficiency. 【Features】 ■ The puzzle type enables the creation of transport lines in various shapes. ■ Made using injection molding, resulting in low costs. ■ Significantly lighter and available in a variety of colors compared to conventional units. ■ Four types of ball bearings can be attached to a single plate. ■ The roller type can transport uneven workpieces that are difficult to move with ball bearings, without being restricted by the shape of cardboard bottoms. *For more details, please refer to the PDF document or feel free to contact us.

• Roller Jack

It is possible to provide shapes and loads that meet the user's requirements. We also accommodate special products such as those for foot placement.

The "IBU type/IBT type" is a lightweight iguchi bearing unit that significantly reduces the installation effort required for iguchi bearings commonly used in transport lines. The "IBU type" arranges the US-25 type iguchi bearings in a vertical orientation, while the "IBT type" arranges the IM-25 type iguchi bearings in both vertical and horizontal directions in a table-style product. We can provide shapes and loads tailored to the user's preferences, and we also design and manufacture other special types, including POM balls and size modifications. 【IBU Type Features】 ■ Vertical arrangement of US-25 type iguchi bearings ■ Reduces the installation effort for iguchi bearings ■ Supports design and manufacturing of other special types, including POM balls and size modifications *For more details, please refer to the PDF document or feel free to contact us.

• Conveyor

We would like to inform you that, in order to further strengthen and enhance our sales and service operations, there will be changes to our Nagoya Sales Office as of April 1st, as detailed below. ■ Relocation of Nagoya Sales Office 【New Address】 〒460-0003 6th Floor, Sando Building, 1-7-27 Nishiki, Naka Ward, Nagoya City, Aichi Prefecture TEL: 052-212-6520 / FAX: 052-212-6521 *Please note that the TEL and FAX numbers will also change. Taking this opportunity, all of our staff will continue to make even greater efforts. Please feel free to contact us.

iPick Co., Ltd., a partition manufacturer, will explain the definition of non-combustible materials under the Building Standards Act and their importance in office interiors. Fire-resistant materials are classified into three categories: non-combustible, quasi-non-combustible, and flame-retardant, based on safety during a fire. At iPick, we handle aluminum partitions that have received non-combustible certification, demonstrating high fire resistance, which is required by "interior restrictions" depending on the size and use of the building. Selecting appropriate materials is crucial not only for protecting the lives of employees but also from the perspective of asset protection and business continuity planning (BCP). We propose the creation of safe spaces that balance compliance with regulations and design. ＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊ For the design and construction of interior partitions from offices to toilet booths, leave it to iPick, the partition specialist manufacturer! "We are accepting reservations for live office and showroom tours." 6F NMF Kanda Iwamotocho Building, 3-8-16 Iwamotocho, Chiyoda-ku, Tokyo For inquiries, feel free to contact our toll-free number 0120-020-720 (Weekdays 10:00 AM to 5:00 PM)!

JECA FAIR 2026 will be exhibiting at the 74th Electrical Installation Industry Exhibition. Dates: May 27, 28, 29 Venue: Tokyo Big Sight, Halls 1, 2, 3, and 8 We look forward to your visit.

The JRE Disaster Assessment Support System Gragram, jointly developed by Hakusan Industrial Co., Ltd. (Headquarters: Fuchu City, Tokyo, President: Minoru Yoshida https://www.hakusan.co.jp/) and JR East Japan Architectural Design Co., Ltd. (Headquarters: Shibuya City, Tokyo, President: Yoshihiko Ito https://www.jred.co.jp/), has been implemented in all buildings of the TAKANAWA GATEWAY CITY, which will have its grand opening on March 28, 2026, and OIMACHI TRACKS, which will open to the public. For more details, please refer to the link below.

We would like to inform you that as of March 27, 2026, our company has become a wholly-owned subsidiary of SmartHR, Inc. through the transfer of shares from Kowa Company, Ltd. This decision is a proactive step to maximize the strong management resources and networks held by SmartHR, allowing us to evolve our service provision system into a more stable and advanced one. Please note that there will be no changes to our business activities, company name, or service provision system following the change in shareholders. Our employees are committed to working together to meet your expectations more than ever. For more details, please also refer to the press release from SmartHR. We sincerely ask for your continued guidance and support.