Notice of the 60th Anniversary [Good Light Honshu Co., Ltd.]

I wanted core materials like this... We respond to such voices! Insulation and condensation prevention agent for composite sandwich panels - Honpanel W Tack.

Hon Panel W Tack is a product that has an acrylic-based adhesive applied to both sides of extruded polystyrene foam boards (manufactured by Dow Chemical, branded as "Wood Rack"). By using Hon Panel W Tack as the core material, it is possible to manufacture composite insulation panels in a short time, and the bending strength of the panels is significantly increased. We offer six different thicknesses. ■ The adhesive for Hon Panel W Tack is F☆☆☆☆ The acrylic-based adhesive applied to Hon Panel W Tack does not contain VOC-regulated compounds such as toluene or formaldehyde. Additionally, the formaldehyde emission value of the acrylic-based adhesive, tested under the same conditions as adhesives, is less than 0.5, corresponding to the non-regulated rank of F☆☆☆☆. The extruded polystyrene foam board, which is the base material for Hon Panel Tack, is also an insulation material that does not emit formaldehyde and is not subject to notification, allowing for safe use without restrictions. ◎ For more details, please contact us or download the catalog.

• stone
• glue
• Insulation work

Lightweight, simple, and high-performance! It is an environmentally friendly insulation material that also addresses global environmental issues.

Hon Panel is a highly functional insulation and condensation prevention material that can be applied as a backing to interior and exterior metal panels such as aluminum, stainless steel, and colored steel sheets. It is a product coated with a special acrylic adhesive on a moisture board made of extruded polystyrene foam that has a skin layer on the surface. The lightweight, easy-to-use, and high-performance Hon Panel promises to be a valuable asset to your work. 【Sick House Measures】 ■ Hon Panel is a non-Freon insulation material. The acrylic adhesive applied to Hon Panel does not contain VOC-regulated compounds such as toluene or formaldehyde. Furthermore, the formaldehyde emission value of the acrylic adhesive is less than 0.5, which corresponds to the non-regulated rank of F☆☆☆☆ based on equivalent adhesive testing. The extruded polystyrene foam board, which is the base material of Hon Panel, is also an insulation material that does not emit formaldehyde and is not subject to notification, allowing for safe use without restrictions. ◎ For more details, please contact us or download the catalog.

• panel
• Insulation work

A comprehensive guide for comparing various materials and performance! This book is helpful for selecting insulation and condensation prevention materials.

This document provides a detailed introduction to the selection points for insulation materials. We hope it will be helpful for those looking for insulation materials. 【Contents】 ■ Choosing by performance - Select materials with low thermal conductivity - ■ Choosing by durability - Select materials with excellent water resistance and low water absorption - ■ Choosing by handling - Select materials that are easy to process and handle - ■ About insulation performance - Explanation of terms that represent insulation performance - ■ Comparison - Comprehensive comparison - We also compare the insulation performance, water absorption, and moisture resistance of our product, the metal panel insulation condensation prevention material "Honpanel," with spray polyurethane and glass wool, and the results are published. *The document can be viewed via PDF download.

• Heat insulation and heat shielding methods

Easy installation by simply applying it to the roof significantly reduces rain noise. It also prevents condensation and provides insulation.

"Sound Proof" is a lightweight vibration-damping sheet for metal roofs and metal tiles, made by impregnating vibration-damping resin into PET non-woven fabric and fiberglass. It can be easily installed by simply applying it to the underside of the roof, reducing rain noise and creating a comfortable living space. You can choose from three types: one using non-combustible certified PET non-woven fabric as the base material, one using fiberglass with condensation prevention and insulation properties, and one with adhesive. 【Features】 ■ Reduces rain noise, enhancing living comfort ■ The PET non-woven fabric type is excellent in durability and light resistance, and is easy to fold ■ The fiberglass type has obtained individual non-combustibility certification *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• others

An article has been published about the case of introducing the expense reimbursement system "Rakuraku Seisan" at TSP Corporation. ~ In the case of TSP ~ Before the introduction, there were challenges such as dealing with the "paper" sent from various locations and the reliance on specific individuals for the tasks. After the introduction, the input and checking of FB data, which used to take 2 to 3 hours, can now be completed in just 5 minutes. Additionally, the mindset of the accounting department, which was previously reliant on manual entry, has changed. [Case Overview] ■ Challenges before introduction - Dealing with "paper" sent from various locations, reliance on specific individuals ■ Key points of introduction - A robust support system for setup and operation - Easy to start from a small scale both financially and functionally *For more details, please refer to the related links or feel free to contact us.

The facility operating the nurse call system has made the bed exit sensor wireless, allowing it to notify in conjunction with the nurse call. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensor wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ The bed exit sensor notifies wirelessly in conjunction with the nurse call. ○ Up to 5 transmitters can be registered with one receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.

Full and empty management refers to the real-time display of parking availability and the management of efficient use of parking spaces. By utilizing Hotron's sensors, drivers can quickly discover available parking spaces, achieving efficient parking lot operations. ■ For large parking lots, the "floor management method" and "block management method," which focus on cost reduction, are recommended. Sensors are installed at regular intervals to count the number of vehicles passing through. This method offers the advantage of easy installation and low costs. 【Target Products】 - Vehicle Count Sensor CCS2 - Ultrasonic Sensor HM-UX2/UW2 ■ For smaller scale operations, the "space management method," which installs sensors in each parking space to display availability with high accuracy, is recommended. By ensuring accurate full and empty displays, it helps prevent unnecessary entry of new vehicles and enables safe parking lot operations. 【Target Products】 - Occupancy Detection Sensor HM-UX2/UW2 - Occupancy/Pass Detection Sensor HM-LC6 - Occupancy Detection Sensor HM-LC7/LC7-FLS - Occupancy/Pass Detection Sensor HM-S6 - Occupancy Detection Sensor HM-S8

The non-contact beam touch sensor "HA-T401/HA-T520" has a compact detection range, making it an ideal automatic door sensor for installation on automatic doors facing narrow corridors or busy streets. Depending on the application and installation location, you can choose between "non-vision mounting type" and "non-vision built-in type." 【Features】 ● With the beam touch sensor, you can open and close the automatic door simply by bringing your hand close without touching it, ensuring hygiene. ● Depending on the installation environment, such as single sliding or bi-parting doors, the detection range can be set in four configurations: left, center, right, and a total of 12 spots. ● Two types of activation row settings are available to reduce unnecessary opening and closing of the automatic door due to cross traffic, contributing to energy-saving effects. ● The touch switch and infrared sensor are integrated, allowing for a switch between beam touch and infrared sensor with a single model. 【Recommended for such locations!】 ☑ Entrance facing a busy corridor ☑ Counter or sign near the door ☑ Buildings facing narrow corridors ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors ◎ For more details, please download the materials or contact us.

Japan is one of the top 10 countries in the world with frequent earthquakes. The 2020 White Paper on Land, Infrastructure, Transport and Tourism has also reported an increase in the probability of major earthquakes occurring. Regarding the Nankai Trough earthquake, the probability of an earthquake with a magnitude of 8 to 9 occurring within the next 30 years is estimated to be 70 to 80%. At Hotron, we recommend the introduction of seismic devices for earthquake countermeasures in buildings and equipment. The seismic device 'HK-2' is a product that automatically performs various controls that have been pre-set when it detects strong shaking equivalent to a seismic intensity of 5 lower or higher. For example, it can automatically execute actions such as: "Open automatic doors and gates to secure evacuation routes and access for emergency vehicles" "Transmit signals to the control room and stop facility equipment" "Unlock the keys to locked lockers" "Automatically play voice guidance" For more details, please download the materials or contact us.