Thank you for visiting "ThermoTech 2022" and the ranking of featured products.

★Demo unit available for loan★ - Domestic dew point meter capable of measuring dew points from -100 to +20 ℃dp

● Domestic development and manufacturing ● Dew point measurement from -100 to +20 ℃dp ● Accuracy ±2 ℃dp ● Usually in stock ● Comprehensive support system ● Traceability available ■ Techne Measurement Co., Ltd. has been handling moisture management and measurement instruments centered around dew point meters for the past 40 years. The capacitive (impedance) TK-100 online dew point meter is a flagship product of Techne Measurement Co., Ltd. The TK-100 online dew point meter consists of the TK-100 transmitter, monitor, and sensor cable, allowing for easy initiation of dew point measurement. For more details, please download the catalog or contact us. #MoistureMeter

• Other measuring instruments

High-precision mirror-type dew point meter. It has a built-in pump, flow meter, and pressure sensor, allowing for accurate low dew point measurements.

● Dew point measurement range: -60 ℃dp to +20 ℃dp (MBW973S/E/CA) ● Realization of high response speed with ORIS function ● Built-in pump, flow meter, and pressure sensor (varies by model) ● Equipped with Stirling cooler (only MBW973L) ■ The MBW973 dew point meter uses the ORIS (Optimum Response Injection System) function to forcibly add a small amount of moisture to the mirror surface, increasing the amount of condensation on the mirror surface. This achieves a reduction in the time required to stabilize in low dew point regions. Additionally, with the built-in pump, flow meter, and pressure sensor, measurements can be started immediately. Model selection examples: 【Low dew point range up to -80 degrees】→ MBW973L 【Low dew point range up to -60 degrees】→ MBW973S For more details, please contact us or refer to the catalog.

• Other measuring instruments

An all-in-one unit that completes moisture measurement in oil!

★It can be installed as is and used immediately! ■ Polymer-based oil moisture meter ■ Moisture activity value measurement range 0-1 aw ■ Measurement in ppm is possible ■ Option to choose whether or not to include a TFT display* *There are also selection options such as a patrol light, so please refer to the basic information. The core moisture detection component of the EE360 oil moisture meter equipped in TKZH002 utilizes a polymer sensor that employs thin-film technology. *Only for the EE33 temperature and humidity dew point transmitter designed for high humidity and harsh environments. It is a moisture meter with low aging changes, high performance, and fast response. Since it provides continuous online measurement, it will notify you via an alarm to address moisture and the timing for oil replacement before moisture contaminates the oil and affects insulation properties.

• Other analytical equipment

For oil deterioration diagnosis! Displays moisture activity value (aw), oil temperature (°C), and moisture content (ppm). A multifunctional handheld measuring device, Techneport Oil.

● Measurement of water activity value (aw) and oil temperature (°C) to calculate water content (ppm) ● TFT touchscreen ● 10 types of oil parameter settings available ● Data logging function (approximately 2 million points) ● One-point or two-point calibration with a simple calibration kit (optional) ■ TEKHNEport-Oil measures the water activity value (aw) and oil temperature (°C) in oil, allowing for the calculation of water content (ppm). It can store parameters for 10 different types of oil needed for conversion, enabling the management of multiple types of oil with a single unit. Using these parameters, more accurate measurements of water content in oil can be achieved. Measuring water content in oil is useful for diagnosing oil contamination and degradation, ensuring that the timing for oil replacement is not missed.

• Other measuring instruments

Dew point measurement unit with built-in sampling equipment!

■ Ideal for spot checks ■ Simple operability ■ Choose a dew point meter according to the application TK: Built-in TK-100 dew point meter for low dew points TE: Built-in TE-660 dew point meter for medium dew points ■ For measuring furnace atmosphere ■ For measuring chamber atmosphere This product is a portable all-in-one dew point meter equipped with a dew point meter and the necessary sampling equipment for measurement. It includes a filter, needle valve, flow meter, and pump. The dew point meter features the well-regarded capacitive dew point meter TK-100 or the polymer dew point meter TE-660 manufactured by Techne Measurement Co., Ltd. for furnace dew point management. For applications with a lot of dust, an external pre-filter (optional-PF) is recommended. For more details, please download the catalog.

• Other measuring instruments

Low-cost model for OEM oxygen concentration measurement in ppm/%!

● High value-added OEM model inheriting the concept of the 201RS/2001RS series ● Achieves low price ● Small and compact model ● Adopts self-developed galvanic cell type sensor strong against combustible gases and organic solvents ■ Model 201LC/2001LC utilizes the same front panel and digital electronics as Model 2001RS, functioning as an oxygen analyzer at PPM and percent levels. Like other models, it uses our self-developed AMI galvanic cell type (electrochemical) sensor, excelling in basic performance such as response speed, reproducibility, and lifespan. * Compared to the 201RS/2001RS series, it does not have digital communication functions, but there are no differences in measurement range, accuracy, or response speed. ■ The sensor is a disposable cartridge type, allowing for easy manual replacement from the front panel. For more details, please download the catalog or contact us.

• Other measuring instruments

Measurement control panel for various measurements in the atmosphere gas!

When measuring the dew point and oxygen concentration in the atmosphere gas inside the furnace, the gas is sampled with a pump, impurities are removed with a filter, and then measurements are taken.

• Other measuring instruments

We would like to inform you that, in order to further strengthen and enhance our sales and service operations, there will be changes to our Nagoya Sales Office as of April 1st, as detailed below. ■ Relocation of Nagoya Sales Office 【New Address】 〒460-0003 6th Floor, Sando Building, 1-7-27 Nishiki, Naka Ward, Nagoya City, Aichi Prefecture TEL: 052-212-6520 / FAX: 052-212-6521 *Please note that the TEL and FAX numbers will also change. Taking this opportunity, all of our staff will continue to make even greater efforts. Please feel free to contact us.

To combat heatstroke during the summer, Sysmet Co., Ltd. has started providing black globe thermometers again this year. Differences from conventional black globe thermometers: - 17-day ahead heat index (WBGT) forecast with a 500m mesh - 1-minute updates of heat index (WBGT) measurements compliant with JIS standards - Email alerts when threshold values are exceeded, along with alarm devices (electronic display boards, rotating lights) and notifications via direct LINE WORKS, etc.

We will introduce the implementation results of the sensor technology developed by the Hotron Group, which has been cultivated over more than half a century, through customer case studies. In addition to automatic door sensors, we also offer a wide range of vehicle detection sensors and nursing/care sensors. We have many implementation examples available, so please take a look at the case study page.

■ Evaluation Points of the Award-Winning Work "OPELAIII Cx" A rigorous evaluation was conducted by 129 design experts from approximately 10,000 submitted designs from 68 countries and regions around the world. Our "OPELAIII Cx" received high praise in the following three pillars, leading to its award. Innovative Innovation: A new approach that is not bound by existing concepts has realized the [wearable shadowless lamp]. Thorough Usability: Based on a comprehensive user perspective, we pursued intuitive and stress-free excellent operability. Design Pursuing Ergonomics: From material selection to the details of product design, we prioritized the health and comfort of doctors around the world who work in harsh environments. We thoroughly implement ergonomics to reduce physical strain and maximize performance. Details of the award-winning work are published on the official iF design portal site at https://ifdesign.com/en/winner-ranking/project/opelaiii-cx/739885.

This product is a light source device utilized in a wide range of processes such as curing, surface treatment, sterilization, analysis, and material evaluation using ultraviolet (UV) light. With stable light output and an easy-to-handle design, it can be widely used from manufacturing sites to research and development fields. Depending on the application, you can select the type and output of the lamp, ensuring stable processing quality. Main UV lamp light source products: 1. Excimer light source Covers special wavelength ranges that cannot be achieved with LEDs, making it ideal for research and evaluation applications requiring specific wavelengths, such as semiconductor and material evaluation, surface modification, and photochemical reactions. 2. Low-pressure mercury lamp light source Emits high-energy short-wavelength UV, used in various fields such as sterilization, surface cleaning, resin pretreatment, analytical devices, and environmental measurement instruments. 3. High-pressure mercury lamp and metal halide lamp light source (for UV curing devices) Compatible with resins that are difficult to cure with LEDs, it plays a significant role in the adhesion, printing, and coating processes of UV-curable resins, as well as in the manufacturing of electronic components and the curing processes of optical materials. It also supports selection tests for light sources and filters, proposing optimal irradiation conditions tailored to resin characteristics. Custom specifications are also available. Please feel free to consult us regarding irradiation range and required functions.