Thank you for waiting! The LED floodlight equipped with a special stage is now available!

Energy-saving yet high brightness! With a power consumption of 30W, the brightness is comparable to that of a 150W mercury lamp!

●Original design by our company! A heavy-duty design with high-quality aluminum alloy and cut lines resembling molding. ●Excellent heat dissipation performance! Luxuriously using heat-resistant aluminum, the comb-like fins on the back efficiently dissipate heat! Even after 3 hours of continuous lighting, the temperature is kept around 50 degrees, reducing the risk of failure due to heat. ●Convenient original design of the bracket! By angling the corners like origami, the bracket can be installed on walls and other surfaces while still attached to the main body! This reduces the hassle of installation. ●Reduced power consumption, increased brightness! Power consumption is kept to 30W, while brightness is significantly improved compared to similar power consumption! It is comparable to a 150W mercury lamp. ●Eye-friendly daylight white light! The color temperature of the light is 5000K daylight white. It is bright yet not glaring, making it ideal for work scenes. ●Improved earthquake resistance! By giving the bracket a unique slope and angle, the load is distributed, reducing the burden on any one point! Wind and earthquake resistance have been enhanced. ●Equipped with a ventilation valve! A ventilation valve is included to release humidity from the sealed housing! This helps prevent condensation.

• Floodlight
• Other lighting fixtures
• Signs, banners, lanterns, and curtains

Energy-saving yet high brightness! With a power consumption of 60W, it matches the brightness of a 300W mercury lamp! Brightness of 10,200LM, equipped with a ventilation valve, resistant to moisture accumulation!

●Original design by our company! A heavy-duty design with high-quality aluminum alloy featuring cut lines like molding. ●Excellent heat dissipation performance! Luxuriously using heat-resistant aluminum, the comb-like fins on the back efficiently dissipate heat! Even after 3 hours of continuous lighting, the temperature is kept around 40 degrees, reducing the risk of failure due to heat. ●Convenient original design of the bracket! By angling the corners like origami, the bracket can be installed on walls and other surfaces while still attached to the main body! This reduces the effort required for installation. ●Reduced power consumption with increased brightness! Power consumption is kept to 60W, while brightness is significantly improved compared to the same power consumption! It is comparable to a 300W mercury lamp. ●Eye-friendly daylight white illumination! The color temperature of the light is 5000K daylight white. It is bright yet minimizes glare, making it ideal for work scenes. ●Increased earthquake resistance! By giving the bracket a unique slope and angle, the load is distributed, reducing the burden on any one point! Wind and earthquake resistance have been improved. ●Equipped with a ventilation valve! A ventilation valve allows humidity inside the sealed housing to escape! This helps prevent condensation.

• Floodlight
• Other lighting fixtures
• Signs, banners, lanterns, and curtains

Energy-saving yet high brightness! At 100W, it matches the brightness of a 500W mercury lamp! Brightness of 17,000 LM, equipped with a ventilation valve to reduce moisture buildup.

●Original design by our company! A heavy-duty design with high-quality aluminum alloy featuring cut lines like molding. ●Excellent heat dissipation performance! Luxuriously using heat-resistant aluminum, the comb-shaped fins on the back efficiently dissipate heat! Even after 3 hours of continuous lighting, the temperature is kept around 50 degrees, reducing the risk of failure due to heat. ●Convenience improved with our original design of the bracket! By angling the corners like origami, the bracket can be installed on walls and other surfaces while still attached to the main body! This reduces the hassle of installation. ●Lower power consumption with increased brightness! Power consumption is kept to 100W, while brightness is significantly improved compared to the same power consumption! It is equivalent to a 500W mercury lamp. ●Eye-friendly daylight white illumination! The color temperature of the light is 5000K daylight white. It is bright yet minimizes glare, making it ideal for work scenes. ●Increased earthquake resistance! By giving the bracket a unique slope and angle, the load is distributed, reducing the burden on any one point! Wind and earthquake resistance have been improved. ●Equipped with a ventilation valve! Includes a ventilation valve to release humidity inside the sealed housing! This helps prevent condensation.

• Floodlight
• Other lighting fixtures
• Signs, banners, lanterns, and curtains

An article has been published about the case of introducing the expense reimbursement system "Rakuraku Seisan" at TSP Corporation. ~ In the case of TSP ~ Before the introduction, there were challenges such as dealing with the "paper" sent from various locations and the reliance on specific individuals for the tasks. After the introduction, the input and checking of FB data, which used to take 2 to 3 hours, can now be completed in just 5 minutes. Additionally, the mindset of the accounting department, which was previously reliant on manual entry, has changed. [Case Overview] ■ Challenges before introduction - Dealing with "paper" sent from various locations, reliance on specific individuals ■ Key points of introduction - A robust support system for setup and operation - Easy to start from a small scale both financially and functionally *For more details, please refer to the related links or feel free to contact us.

The facility operating the nurse call system has made the bed exit sensor wireless, allowing it to notify in conjunction with the nurse call. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensor wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ The bed exit sensor notifies wirelessly in conjunction with the nurse call. ○ Up to 5 transmitters can be registered with one receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.

Full and empty management refers to the real-time display of parking availability and the management of efficient use of parking spaces. By utilizing Hotron's sensors, drivers can quickly discover available parking spaces, achieving efficient parking lot operations. ■ For large parking lots, the "floor management method" and "block management method," which focus on cost reduction, are recommended. Sensors are installed at regular intervals to count the number of vehicles passing through. This method offers the advantage of easy installation and low costs. 【Target Products】 - Vehicle Count Sensor CCS2 - Ultrasonic Sensor HM-UX2/UW2 ■ For smaller scale operations, the "space management method," which installs sensors in each parking space to display availability with high accuracy, is recommended. By ensuring accurate full and empty displays, it helps prevent unnecessary entry of new vehicles and enables safe parking lot operations. 【Target Products】 - Occupancy Detection Sensor HM-UX2/UW2 - Occupancy/Pass Detection Sensor HM-LC6 - Occupancy Detection Sensor HM-LC7/LC7-FLS - Occupancy/Pass Detection Sensor HM-S6 - Occupancy Detection Sensor HM-S8

Castem Co., Ltd. will exhibit at the "Monozukuri World Osaka - Mechanical Components Technology Exhibition" held at Intex Osaka from Wednesday, October 1 to Friday, October 3, 2025. We will showcase lost-wax precision casting and MIM (Metal Injection Molding) products, as well as introduce our new technology, mold-less casting "Digital Cast." In addition to our popular casting demonstrations, we will present case studies on solving issues related to metal parts. Please utilize our "Technical Consultation Booth" to learn about optimal manufacturing methods tailored to your needs, from ultra-small lots to mass production. 【Exhibition Overview】 Dates: October 1 (Wed) - October 3 (Fri), 2025, 10:00 AM - 5:00 PM Venue: Intex Osaka (1-5-102 Nanko-Kita, Suminoe-ku, Osaka City, Osaka Prefecture) Exhibition Booth Number: Hall 6, B Hall 51-1 Pre-registration allows for smooth entry. It is convenient to register via the URL below before your visit. We sincerely look forward to your attendance. https://www.manufacturing-world.jp/osaka/ja-jp/register.html?code=1431877272389396-VEK

From November 11, 2025 (Tuesday), at Pacifico Yokohama, we will be exhibiting at interOpto2025 / Light and Laser Science and Technology Fair (organized by the Optical Industry Technology Promotion Association / Optronics Corporation) with a focus on: - UV-transmitting glass that can be molded - Diffusion glass that can uniformly diffuse incident light - A double-sided lens array that is molded without lamination 【About the Exhibition】 Event Name: interOpto2025 / Light and Laser Science and Technology Fair UV Fair Date: November 11 (Tuesday) to 13 (Thursday), 2025 Opening Hours: 10:00 AM to 5:00 PM Venue: Pacifico Yokohama Exhibition Hall C Booth Number: C-15 Organizer: Optical Industry Technology Promotion Association / Optronics Corporation Official Website: https://www.optronics.co.jp/interopto/ We invite everyone attending this exhibition to visit our booth "Gosuzumi Seiko Glass." We sincerely look forward to meeting you on-site.