Notice of Participation in 'ThermoTech 2022' from June 1 (Wednesday) to June 3 (Friday), 2022

★Demo unit available for loan★ - Domestic dew point meter capable of measuring dew points from -100 to +20 ℃dp

● Domestic development and manufacturing ● Dew point measurement from -100 to +20 ℃dp ● Accuracy ±2 ℃dp ● Usually in stock ● Comprehensive support system ● Traceability available ■ Techne Measurement Co., Ltd. has been handling moisture management and measurement instruments centered around dew point meters for the past 40 years. The capacitive (impedance) TK-100 online dew point meter is a flagship product of Techne Measurement Co., Ltd. The TK-100 online dew point meter consists of the TK-100 transmitter, monitor, and sensor cable, allowing for easy initiation of dew point measurement. For more details, please download the catalog or contact us. #MoistureMeter

• Other measuring instruments

High-precision mirror-type dew point meter. It has a built-in pump, flow meter, and pressure sensor, allowing for accurate low dew point measurements.

● Dew point measurement range: -60 ℃dp to +20 ℃dp (MBW973S/E/CA) ● Realization of high response speed with ORIS function ● Built-in pump, flow meter, and pressure sensor (varies by model) ● Equipped with Stirling cooler (only MBW973L) ■ The MBW973 dew point meter uses the ORIS (Optimum Response Injection System) function to forcibly add a small amount of moisture to the mirror surface, increasing the amount of condensation on the mirror surface. This achieves a reduction in the time required to stabilize in low dew point regions. Additionally, with the built-in pump, flow meter, and pressure sensor, measurements can be started immediately. Model selection examples: 【Low dew point range up to -80 degrees】→ MBW973L 【Low dew point range up to -60 degrees】→ MBW973S For more details, please contact us or refer to the catalog.

• Other measuring instruments

An all-in-one unit that completes moisture measurement in oil!

★It can be installed as is and used immediately! ■ Polymer-based oil moisture meter ■ Moisture activity value measurement range 0-1 aw ■ Measurement in ppm is possible ■ Option to choose whether or not to include a TFT display* *There are also selection options such as a patrol light, so please refer to the basic information. The core moisture detection component of the EE360 oil moisture meter equipped in TKZH002 utilizes a polymer sensor that employs thin-film technology. *Only for the EE33 temperature and humidity dew point transmitter designed for high humidity and harsh environments. It is a moisture meter with low aging changes, high performance, and fast response. Since it provides continuous online measurement, it will notify you via an alarm to address moisture and the timing for oil replacement before moisture contaminates the oil and affects insulation properties.

• Other analytical equipment

For oil deterioration diagnosis! Displays moisture activity value (aw), oil temperature (°C), and moisture content (ppm). A multifunctional handheld measuring device, Techneport Oil.

● Measurement of water activity value (aw) and oil temperature (°C) to calculate water content (ppm) ● TFT touchscreen ● 10 types of oil parameter settings available ● Data logging function (approximately 2 million points) ● One-point or two-point calibration with a simple calibration kit (optional) ■ TEKHNEport-Oil measures the water activity value (aw) and oil temperature (°C) in oil, allowing for the calculation of water content (ppm). It can store parameters for 10 different types of oil needed for conversion, enabling the management of multiple types of oil with a single unit. Using these parameters, more accurate measurements of water content in oil can be achieved. Measuring water content in oil is useful for diagnosing oil contamination and degradation, ensuring that the timing for oil replacement is not missed.

• Other measuring instruments

Dew point measurement unit with built-in sampling equipment!

■ Ideal for spot checks ■ Simple operability ■ Choose a dew point meter according to the application TK: Built-in TK-100 dew point meter for low dew points TE: Built-in TE-660 dew point meter for medium dew points ■ For measuring furnace atmosphere ■ For measuring chamber atmosphere This product is a portable all-in-one dew point meter equipped with a dew point meter and the necessary sampling equipment for measurement. It includes a filter, needle valve, flow meter, and pump. The dew point meter features the well-regarded capacitive dew point meter TK-100 or the polymer dew point meter TE-660 manufactured by Techne Measurement Co., Ltd. for furnace dew point management. For applications with a lot of dust, an external pre-filter (optional-PF) is recommended. For more details, please download the catalog.

• Other measuring instruments

Low-cost model for OEM oxygen concentration measurement in ppm/%!

● High value-added OEM model inheriting the concept of the 201RS/2001RS series ● Achieves low price ● Small and compact model ● Adopts self-developed galvanic cell type sensor strong against combustible gases and organic solvents ■ Model 201LC/2001LC utilizes the same front panel and digital electronics as Model 2001RS, functioning as an oxygen analyzer at PPM and percent levels. Like other models, it uses our self-developed AMI galvanic cell type (electrochemical) sensor, excelling in basic performance such as response speed, reproducibility, and lifespan. * Compared to the 201RS/2001RS series, it does not have digital communication functions, but there are no differences in measurement range, accuracy, or response speed. ■ The sensor is a disposable cartridge type, allowing for easy manual replacement from the front panel. For more details, please download the catalog or contact us.

• Other measuring instruments

Measurement control panel for various measurements in the atmosphere gas!

When measuring the dew point and oxygen concentration in the atmosphere gas inside the furnace, the gas is sampled with a pump, impurities are removed with a filter, and then measurements are taken.

• Other measuring instruments

Sekisui Filler Co., Ltd. will be exhibiting at the "Automotive Technology Exhibition 2026 YOKOHAMA" held at PACIFICO YOKOHAMA from May 27. (Booth number 285, within the Sekisui Chemical booth) 【Exhibited Products】 Mobility G - Re-sealable gasket HM (EV Seal 500) - Interior materials (Thermonex/Swiftlock) - Battery protection materials (EV Protect 4006SFR, etc.) Electronics / Car Electronics - Adhesives for camera modules - Adhesives for displays - Conformal coating agents - Optical adhesives We sincerely look forward to your visit.

Palmholtz Co., Ltd. will be exhibiting at the "AXIA EXPO 2026" held at Aichi Sky Expo (Aichi Prefectural International Exhibition Center). Our company possesses unique new technologies that transform oil palm trunks (Oil Palm Trunk = OPT), which have been treated as unused resources due to their lack of strength and value as building materials, into wood-based products such as building materials and furniture. The oil palm, which produces a large amount of edible oil, leaves the trunks unused and discarded after the oil is extracted. It is estimated that the amount of discarded trunks is 20 million tons per year in both Malaysia and Indonesia. This project involves peeling and drying the unused oil palm trunks to create veneer, which is then layered and compressed under high temperature and pressure to manufacture and sell exterior materials. We showcased a bench as a reference exhibit at the Malaysia Pavilion during the 2025 Osaka Expo. We sincerely look forward to your visit.

Kawasaki Corporation (Headquarters: Tokyo) is pleased to announce that it will participate in the interim report meeting for the Tokyo Metropolitan Government's "Decarbonization Support Project in the Supply Chain for the Creation of a Green Products Market," which will be held on May 20, 2026. At this meeting, we will present the CO2 reduction effects of our environmentally friendly plastic formwork "Daiko Panel," which we have conceived, developed, manufactured, and sold, along with our initiatives towards greening, including related auxiliary materials. [Overview of the Presentation] Theme: Utilizing CFP to enhance CO2 reduction of "Daiko Panel" and promote greening throughout the entire supply chain. Main Content: Introducing initiatives aimed at CO2 reduction, referencing the background of our application for this project and the CFP calculation results for "Daiko Panel" and its auxiliary materials. [Presentation Date and Time] Interim report meeting: May 20, 2026 (Wednesday) from 15:00 to 17:00 Details of the interim report meeting and the Tokyo Metropolitan Government's project: Decarbonization support in the supply chain for the creation of a green products market https://www.cfp-sc.metro.tokyo.lg.jp/

Rentama Co., Ltd. will be exhibiting at the "8th International Construction and Surveying Exhibition (CSPI2026)" held at Makuhari Messe. A wide range of cutting-edge products, technologies, and services from the evolving industries of construction machinery, heavy equipment, attachments, construction DX, and i-Construction will be gathered in one place. This is one of the largest exhibitions in Japan for professionals in the construction and surveying industries to gather for business discussions, advanced information gathering, and problem-solving. This is a valuable opportunity to see KEMROC products up close. We understand you may be busy, but we invite you to stop by our booth. We look forward to meeting everyone.

TESSHA Corporation will be exhibiting at 'FOOMA JAPAN 2026' held at Tokyo Big Sight. This exhibition covers various fields of food manufacturing and is one of the largest comprehensive food manufacturing exhibitions in the world, where advanced technologies and knowledge come together. We plan to showcase our "Small Catalytic Deodorization Device SCU-1EH type." We look forward to your visit.