(Free) Instron WEB Seminar Series: Fatigue Testing Machine Series: Features of Electric Drive Fatigue Testing Machines and Their Application to Biological Materials

Supports testing using a constant temperature bath! Reduces energy consumption by minimizing test time.

"WaveMatrix" utilizes self-heating control software for test specimens to optimize test frequency, thereby improving the productivity and consistency of tests related to composite materials and polymer materials. It is possible to reduce test time while achieving unprecedented accuracy in test temperature. This patented system achieves and maintains the specified test temperature by changing the test frequency according to the measurement temperature of the test specimen. In structural composite materials, the impact of a 5°C temperature change is greater than a change in frequency by a factor of two, making the benefits of strict test temperature control significantly higher than moderate frequency fluctuations. [Features] - User-defined temperature range (controllable up to ±0.5°C) - User-defined frequency range - Thermocouple data input via USB is possible - Analog input of 0-10V for thermocouple data, including infrared thermometer data, is possible - Thermocouples can be installed according to the shape of the test specimen *For more details, please refer to the PDF document or feel free to contact us.

• Other Software

E20000 has been newly added! Dynamic fatigue testing machine that adopts linear motor technology, eliminating the need for hydraulic oil, energy-saving, and low noise.

"ElectroPuls" is an electric fatigue testing machine that utilizes linear motor technology (patented) based on approximately 13 years of testing experience. It features a wide performance range capable of conducting static, dynamic, and fatigue tests, making it an ideal system for various laboratories and testing facilities. It can also be used for testing biomaterials and medical devices. In addition to a variety of testing accessories, the new "E20000" can perform both dynamic and static tests with a single unit. Depending on the application, we offer a lineup of uniaxial systems up to 10kN and 100Nm, as well as linear/torsion (biaxial) options. There are three sizes available for selection based on your needs. Our product meets your testing requirements in a simpler, smarter, and safer way. 【Features】 ■ No hydraulic oil required ■ Energy-efficient ■ Low noise ■ Space-saving ■ No complex and costly maintenance required 【Software Used】 WaveMatrix2 *For more details, please refer to the PDF materials or feel free to contact us.

• Other measuring instruments

Simultaneous testing of up to 16 specimens is possible! Easy access for specimen insertion, preloading, and adjustments.

The "ElectroPuls 16 Station" is a testing system that significantly reduces testing time and contributes to the rapid market introduction of products. It allows simultaneous testing of tensile, compression, and bending tests with up to 16 specimens. Finished products or individual components, such as NiTi single diamond struts, can be uniformly tested at each station due to easy setup and simple preload adjustments. 【Features】 - The adoption of inline button-type load cells allows for precise adjustment of specimens close to the testing fixture. - There are no alignment errors on the XY axis during adjustments or preload at each station. - Each individual push rod can be adjusted by ±5mm for easy insertion and adjustment of specimens. - Anyone can accurately apply uniform preload across all 16 stations. - No specialized knowledge is required. *For more details, please refer to the PDF materials or feel free to contact us.

• Other measuring instruments

Dynamic linear load capacity ±10kN / dynamic torque capacity ±100Nm! The required floor space for the frame is less than 0.8m².

The E10000 is a state-of-the-art dynamic fatigue testing machine designed for dynamic and static testing of a wide range of materials and components, featuring linear-torsion type technology. It is equipped with advanced digital control electronics from Instron, a Dynacell load cell for biaxial testing, console software, and a new testing technique based on the rigidity of the test specimen for hassle-free tuning, an electric crosshead lift, a T-slot table that can be flexibly configured for testing, and many other user-oriented features. It operates on single-phase power and does not require additional utilities (such as pneumatic, hydraulic, or cooling water supply) for basic testing machine operations. **Features** - Oil-free linear motor technology that maintains a clean state - Separate linear/rotary actuators - Designed for dynamic and static testing of diverse materials and components - High dynamic performance, capable of operating at up to 100Hz - Operable on single-phase main power, no hydraulic or pneumatic sources required *For more details, please refer to the PDF document or feel free to contact us.*

• Other measuring instruments

Dynamic linear load capacity ±3000N / static load capacity ±2100N! The required desk space for the frame is less than 0.3, making it compact.

The "ElectroPuls E3000" is a state-of-the-art dynamic fatigue testing machine designed for dynamic and static testing of a wide range of materials and components. It operates on a single-phase power supply and does not require additional utilities (such as compressed air, hydraulic pressure, or cooling water supply) for basic machine operation. Equipped with advanced digital control electronics, DynacellT load cells, console software, and a new testing technique based on the rigidity of the test specimen for hassle-free tuning, electric crosshead lift, a T-slot table that can be flexibly configured for testing, and many other user-oriented features. 【Features】 ■ Oil-free linear motor technology that maintains a clean state ■ Unlockable to allow for rotational freedom of the actuator, providing flexibility in testing ■ Designed for dynamic and static testing of diverse materials and components ■ High dynamic performance, capable of operating at over 100Hz ■ Temperature-controlled air cooling mechanism *For more details, please refer to the PDF materials or feel free to contact us.

• Other measuring instruments

Dynamic linear load capacity ±3000N / dynamic torque capacity ±25Nm! The required desk space for the frame is less than 0.3m².

The "E3000" is a state-of-the-art dynamic fatigue testing machine designed for dynamic and static testing of a wide range of materials and components, featuring a linear-torsion type design. Equipped with advanced digital control electronics, dual-axis Dynacell load cells, console software, and a new testing technique based on the rigidity of the test specimen for hassle-free tuning, electric crosshead lift, a T-slot table that can be flexibly configured for testing, and many other user-oriented features. It operates on a single-phase power supply and does not require additional utilities (such as pneumatic, hydraulic, or cooling water supply) for basic testing machine operations. 【Features】 ■ Oil-free linear motor technology that maintains a clean state ■ Separate linear/rotary actuators ■ Designed for dynamic and static testing of diverse materials and components ■ High dynamic performance, capable of operating above 100Hz ■ Dynamic linear load capacity: ±3000 N / Dynamic torque capacity: ±25 Nm *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments

A variety of hydraulic servo test systems with different capacities and applications, along with a wealth of applications and fixtures!

This catalog introduces the hydraulic servo fatigue testing systems handled by our company. It features a compact tabletop model "8872 (25 kN)" that meets the high demands of various static and dynamic testing requirements, as well as "8803 (500 kN)" and the controller electronics "8800MT." We also showcase a wealth of applications, so please take a look. 【Featured Products (Excerpt)】 ■ 8872 (25 kN) Fatigue Testing System ■ 8874 (25 kN/100 Nm) Fatigue Testing System ■ 8801 (100 kN) Fatigue Testing System ■ 8862 (100 kN) Low Cycle Fatigue Testing System ■ 8802 (250 kN) Fatigue Testing System *For more details, please refer to the PDF document or feel free to contact us.

• Prime movers, torque converters, hydraulic equipment, generators
• Other measuring instruments

Dynamic load capacity maximum ±10kN / Static load capacity ±7kN! The required floor space for the frame is less than 0.8m², making it compact.

The "ElectroPuls E10000" is a state-of-the-art dynamic fatigue testing machine designed for dynamic and static testing of a wide range of materials and components. Equipped with Instron's advanced digital control electronics, Dynacell load cells, console software, and a new testing technique based on the rigidity of the test specimen for hassle-free tuning, electric crosshead lift, a T-slot table that can be flexibly configured for testing, and many other user-oriented features. It operates on a single-phase power supply and does not require additional utilities (such as pneumatic, hydraulic, or cooling water supply) for basic testing machine operations. 【Features】 ■ Oil-free linear motor technology that maintains a clean state ■ Designed for dynamic and static testing of diverse materials and components ■ High dynamic performance, capable of operating at up to 100Hz ■ Operates on single-phase main power supply, no hydraulic or pneumatic sources needed ■ Temperature-controlled air cooling mechanism *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments

Dynamic load capacity ±1000N / Static load capacity ±710N! The required desk space for the frame is less than 0.15m².

The "ElectroPuls E1000" is a state-of-the-art dynamic fatigue testing machine designed for dynamic and static testing of a wide range of materials and components. It features advanced digital control electronics from Instron, Dynacell load cells, console software, and a new testing technique based on the stiffness of the specimen for hassle-free tuning, an electric crosshead lift, a T-slot table that can be flexibly configured for testing, and many other user-oriented functions. It operates on a single-phase power supply and does not require additional utilities (such as pneumatic, hydraulic, or cooling water supply) for basic testing machine operations. 【Features】 ■ Oil-free linear motor technology (patented) that maintains a clean state ■ Designed for dynamic and static testing of diverse materials and components ■ High dynamic performance, capable of operating at over 100Hz ■ Dynamic load capacity: ±1000 N / Static load capacity: ±710 N ■ Operates on single-phase main power supply, no hydraulic or pneumatic sources needed *For more details, please refer to the PDF materials or feel free to contact us.

• Other measuring instruments

We will be exhibiting at the "62nd JAPAN DIY HOMECENTER SHOW 2026." This year, the largest exhibition in the industry will be held with the theme "Let's Go to the DIY Festival in Summer!" Please be sure to visit our booth (No. M31). ■ Introduction of Exhibited Product: Insulation Material "SS Premier" We are introducing "SS Premier" with the concept of moving away from the existing 20mm thick insulation materials. [The secret of 5mm. Maintaining performance while being overwhelmingly thin, light, and easy to install.] - Achieves insulation performance equivalent to RW50mm with a thickness of just 5mm, making it possible to install in limited spaces. - As a sheet material, it can accommodate both round and square ducts. - Lightweight and flexible, making transportation and handling easy, reducing the burden on the job site. Compared to conventional products, it offers advantages in installation space, transportability, and retail display. It has numerous implementation records across the country, including government projects such as the Shibuya Ward Office reconstruction project, as well as universities, hospitals, and large-scale new construction projects. At the venue, you can take a look at actual product samples. All of our staff are sincerely looking forward to your visit at booth No. M31.

Kou Alpha X Co., Ltd. will be exhibiting at the "Automatic Identification Comprehensive Exhibition" held at Tokyo Big Sight. At our booth, we will showcase a wide range of products, including metal-compatible RFID tags (PMT series), "keychain-type tags," and "rugged, environment-resistant tube tags." We look forward to your visit.

North Engineering, the Taiwanese agent of Tokkyo Kiki Co., Ltd., will exhibit at the international exhibition "SEMICON TAIWAN 2026" held in Taiwan. At "SEMICON Taiwan," we will showcase products for micro-vibration and magnetic field countermeasures for semiconductor manufacturing plants, as well as seismic isolation devices for transformers and vibration-damping devices for air conditioning outdoor units as earthquake countermeasures. Event Dates: September 2 (Wednesday) - September 4 (Friday), 2026 Venue: Taipei Nangang Exhibition Center (TaiNEX Hall 1 & 2, Taipei City, Taiwan) Booth Number: K2568 (TaiNEX 1, 1st Floor)

"I don't have anyone in the company to ask if this is the right way to segment." "I can't decide whether it's okay to delete the scenarios set up by my predecessor." I often hear such voices from those in charge of operating MA tools. In this seminar, Shannon, as an MA vendor, will publicly share how they operate MA within their own marketing department, using the actual management screen. Please note that this seminar will not be recorded or archived. It will be presented only to the 15 companies that attend in person. [Screens to be viewed on the day] (tentative) 1: Conditions for segmentation 2: Flow and branches of scenarios 3: Discarded settings [Recommended for those who] - Are almost solely responsible for operating MA tools - Have not been able to make changes to the settings inherited from their predecessor - Feel that they are not using MA as they had originally intended - Want to know how other companies are actually operating at the screen level - Are considering reviewing their current MA tools

Our manufacturer, Shirok, will be exhibiting at the High-Performance Materials Week Tokyo Exhibition held at Makuhari Messe, with participation from Kō Alpha X Co., Ltd. We plan to showcase various silicone products, including silicone prepolymers, at our booth. We sincerely look forward to your visit. Register for attendance here: https://www.material-expo.jp/tokyo/ja-jp/register.html